School of Mechanical Engineering (SMEC)

Journal Publications

2019

[1] R. Dinesh Babu, D. Devaprakasam,”A Review on Additive Manufacturing Techniques in Medical Applications” , International Journal of Advanced Science and Engineering,2349 5359
[2] Muzammil S. Khan, Mahendra Singh Sisodia, Shubham Gupta, M. Feroskhan, S. Kannan and Karunamurthy Krishnasamy ,”Measurement of tribological properties of Cu and Ag blended coconut oil nanofluids for metal cutting” , Engineering Science and Technology, an International Journal,2215-0986
[3] Maharshi Singh and Janardhan Reddy K,”cloud based disassembly of electric vehicle battery” ,Procedia Manufacturing,2351-9789
[4] Pavan Kalyan Lingampally and A Arockia Selvakumar,”Kinematic and Workspace Analysis of a Parallel Rehabilitation Device for HeadNeck Injured Patients” , FME TRANSACTIONS,1451-2092
[5] R. Aylmer Britto, Shreya Sinha, Swastika Palit, Arockia Selvakumar*,”pH Monitoring IOT Controlled Biomimetic Robotic Fish” , International Journal of Recent Technology and Engineering ,ISSN: 2277-3878
[6] D. Devaprakasam, U. Satheesh, P. Prakash,,”Highly sensitive and reliable octyltrichlorosilane coated silicon sensors for nitrogen gas flow detection” ,Sensors and Actuators A ,0924-4247
[7] K. Karunamurthy, R. Manimaran, M. Chandrasekar,”Prediction of solar pond performance parameters using artificial neural network” , Intl. Journal of Computer Aided Engineering and Technology,1757-2665 (online), 1757-2657 (print)
[8] K. B. Rajasekarababu and G. Vinayagamurthy,”Experimental and Computational Simulation of an Open Terrain Wind Flow around a Setback Building using Hybrid Turbulence Models” , Journal of Applied Fluid Mechanics,ISSN: 1735-3572 / EISSN: 1735-3645
[9] Gobinath N., Venugopal T.,”Nucleate Pool Boiling Heat Transfer Characteristics of R600a with CuO Nanoparticles” , Journal of Mechanical Science and Technology,1976-3824
[10] K. V. Arun PillaiP. HariharanJ. M. Jafferson,”ED milling of Ti-6Al-4V using cryogenic-treated Wc tool and nano-graphene powder-mixed dielectricat different discharge energy regimes” , The International Journal of Advanced Manufacturing Technology,0268-3768
[11] R Mohan and R Deivanathan,”A REVIEW OF SELF-SHARPENING MECHANISMS OF FIXED ABRASIVE TOOLS” , International Journal of Mechanical Engineering and Technology (IJMET),0976-6359
[12] Jakkamputi Lakshmipathi and Rajamohan Vasudevan,”Dynamic characterization of a CNT reinforced hybrid uniform and non-uniform composite plates” , Steel and Composite Structures,1229-9367
[13] G Sakthivel, CM Sivaraja, Bernard W Ikua,”Prediction OF CI engine performance, emission and combustion parameters using fish oil as a biodiesel by fuzzy-GA” , Energy, ISSN: 0360-5442
[14] Hemantha Kumar , T. A. Ranjit Kumar , M. Amarnath , V. Sugumaran,”Fault diagnosis of antifriction bearings through sound signals using support vector machine ” , . JOURNAL OF VIBROENGINEERING,ISSN 1392-8716
[15] Vimalanand, S. and Vignesh, P,”Experimental and numerical investigation on the dynamic characteristics of thick laminated plant fiber-reinforced polymer composite plates” , Archive of Applied Mechanics, 0939-1533
[16] Nitin Rohatgi, Krutarth Mehta, Parijat Sarkar and T. Christo Michael,”Emergency braking mechanism for an elevator using hydraulic and pneumatic actuation” , Int. J. Reliability and Safety,1479-3903
[17] M. Amarnath, Deepak Jain, V. Sugumaran and Hemantha Kumar,”Fault Diagnosis of Helical Gear Box Using Decision Tree and Best-First Tree” ,International Journal of Research in Mechanical Engineering , ISSN Online:2347-5188 Print: 2347-8772
[18] V. SUGUMARAN1 , DEEPAK JAIN2 , M. AMARNATH3 and HEMANTHA KUMAR,”Fault Diagnosis of Helical Gear Box using Decision Tree through Vibration Signals” , International Journal of Performability Engineering ,0973-1318
[19] Gaurav S. Harane and K. Annamalai,”Processing and characterization of natural fiber-lycra composite reinforced with epoxy resin” , ARPN Journal of Engineering and Applied Sciences,1819-6608
[20] M. Amarnath, S. Arunav , Hemantha Kumar , V. Sugumaran and G.S Raghvendra,”Fault Diagnosis of Helical Gear Box using Large Margin KNearest Neighbors Classifier using Sound Signals” , Journal of Vibration Engineering & Technologies,ISSN: 2523-3920 (Print) 2523-3939 (Online)
[21] Infant Solomn Vinodh, Sudhanshu Detwal.Arunkumar Sarma and Umasankar.V,”Tribological studies of automotive piston ring by diamond-like carbon coating” , Tribology, Materials, Surfaces and interfaces,1751584X
[22] Umasankar.V, ShijoThomas,”Materials Science Forum” , Influence of Manufacturing Process on Distribution of MWCNT in Aluminium Alloy Matrix and Its Effect on Microhardness,1662-9752
[23] M. Sasikumar, PA.Prasob,”Viscoelastic and mechanical behaviour of reduced graphene oxide and zirconium dioxide filled jute/epoxy composites at different temperature conditions” , Materials Today Communications,2352-4928
A. Joshuva and V. Sugumaran,”A machine learning approach for condition monitoring of wind turbine blade using autoregressive moving average (ARMA) features through vibration signals A comparative study” , Progress in Industrial Ecology – An International Journal,ISSN online: 1478-8764; ISSN print: 1476-8917
[24] R. Dinesh Babu, D. Devaprakasam,”A Review on Additive Manufacturing Techniques in Medical Applications” , International Journal of Advanced Science and Engineering,2349 5359
[25] Maharshi Singh and Janardhan Reddy K,”cloud based disassembly of electric vehicle battery” , Procedia Manufacturing,2351-9789
[26] Pavan Kalyan Lingampally and A Arockia Selvakumar,”Kinematic and Workspace Analysis of a Parallel Rehabilitation Device for HeadNeck Injured Patients” , FME TRANSACTIONS,1451-2092
[27] R. Aylmer Britto, Shreya Sinha, Swastika Palit, Arockia Selvakumar*,”pH Monitoring IOT Controlled Biomimetic Robotic Fish” ,International Journal of Recent Technology and Engineering ,ISSN: 2277-3878
[28] S. Sivarajan R. Padmanabhan and Arun Kumar Sharma,”Improvement in the Tribological Properties of AISI D2 Die Steel by DLC and WC-C Coatings” , Journal of surface science and technology,ISSN (Online) : 0976-9420
[29] M ELango, K Annamalai,”Study on Microstructure and EDAX Analysis of Al/SiC/Gr Hybrid Metal Matrix Composites” , JSST,0970-1893
[30] M.Elango, K.Annamalai,”Study on Microstructure and EDAX Analysis of Al/SiC/Gr Hybrid Metal Matrix Composites” , Journal of surface science and technology,0976-9420
[31] Bhargava Srusti and M.B.Shyam Kumar,”Experimental and Numerical Investigation of Air Temperature Distribution Inside a Car Under Solar Load Condition” , International Journal of Engineering (IJE), Transactions A : Basics,1728-1431
[32] Dani Prafullkrishna Kiran, S.Sivarajan ,”Design and Analysis of Structural Elements of H-Frame Press ” ,International Journal of Recent Technology and Engineering (IJRTE) ,ISSN: 2277-3878
[33] Swastika Palit and M.B.Shyam Kumar ,”Numerical Investigation of Flow past an Uberhood at Low Velocity ” ,IOP Science Journal of Physics : Conference Series,1742-6588
[34] Radha R, Dondapati Sreekanth, Nihal Bharti and Akshay Rana,”Mg-1Sn/Al2O3 biodegradable composites: Effect of Al2O3 addition on mechanical, in-vitro corrosion and bioactivity response” ,Materials research express,2053-1591
[35] Alamelu Manghai T. M.; Jegadeeshwaran R.,”Application of FURIA for Finding the Faults in a Hydraulic Brake System Using a Vibration Analysis through a Machine Learning Approach” ,International Journal of Progonostics and Health Management,2153-2648
[36] Alamelu Manghai T. M.; Jegadeeshwaran R.,”Vibration based brake health monitoring using wavelet features: A machine learning approach” ,Journal of Vibration and Control,1741-2986
[37] K.R. Chellapilla, B.R. Lokavarapu ,”Non-linear torsional vibration of lengthy thin-walled simply supported beam of open section resting on Winkler foundation” ,Applied Acoustics,0003-682X
[38] M. Senthil Kumar, R. V. Mangalaraja, R. Senthil Kumar, L. Natrayan,”Processing and Characterization of AA2024/Al2 O3 /SiC Reinforces Hybrid Composites Using Squeeze Casting Technique” ,Iranian Journal of Materials Science & Engineering,2383-3882
[39] Vanmathi M, Mohamed Ismail M & Senthil Kumar M,”Optimization of RF sputtering process parameters of Al-doped ZnO thin films for gas sensor application grown on Si substrate using grey-Taguchi technique” ,Bulletin of Materials Science,0250-4707
[40] M Vanmathi , M Senthil Kumar , M Mohamed Ismail and G Senguttuvan,”Optimization of process parameters for al-doping back ground on CO gas sensing characteristics of magnetron-sputtered TiO2 sensors” ,Materials Research Express,2053-1591
[41] G.Sakthivel, C.M.Sivaraja, Bernard W.Ikua,”Prediction OF CI engine performance, emission and combustion parameters using fish oil as a biodiesel by fuzzy-GA” ,Energy,ISSN/ISBN Nos: ISSN: 0016-2361
[42] G Sakthivel, Bernard W Ikua,”A novel approach for failure mode and effect analysis in propeller shaft manufacturing industry using fuzzy analytic hierarchy process and GRA VIKOR” ,International Journal of Productivity and Quality Management,SSN online: 1746-6482; ISSN print: 1746-6474
[43] Mohamed Ashiq Ali, Fayaz, Rohit Francisco Viegas, M B Shyam Kumar, Rajendra Kumar Kannapiran and M Feroskhan,”Enhancement of heat transfer in paraffin wax PCM using nano graphene composite for industrial helmets” ,Journal of Energy Storage,2352-152X
[44] K. B. Rajasekarababu, G. Vinayagamurthy, S.Selvirajan,”Experimental and computational investigation of outdoor wind flow around a setback building” ,BUILDING SIMULATION,ISSN: 1996-3599 (print) /1996-8744 (e-version)
[45] Sirajuddin Syed, Manimaran Renganathan,”Numerical investigations on flow characteristics and energy separation in a Ranque Hilsch vortex tube with hydrogen as working medium” ,international journal o f hydrogen energy,0360-3199
[46] Alamelu Manghai T M, Jegadeeshwaran R and Sakthivel G,”Real time condition monitoring of hydraulic brake system using naive bayes and bayes net algorithms” ,IOP: Materials Science and Engineering, Online ISSN: 1757-899X; Print ISSN: 1757-8981
[47] G Sakthivel, S. Senthil Kumar and M. Ilangkumaran,”A genetic algorithm-based artificial neural network model with TOPSISapproach to optimize the engine performanc” ,BIOFUELS, Print ISSN: 1759-7269 Online ISSN: 1759-7277
[48] Alamelu Manghai T. M.; Jegadeeshwaran R.,”Vibration based real time brake health monitoring system: A machine learning approach” ,IOP Conf. Series: Materials Science and Engineering,1757-899X
[49] Alamelu Manghai T. M.; Jegadeeshwaran R.; Sakthivel G,”Real time condition monitoring of hydraulic brake system using naive bayes and bayes net algorithms” ,IOP Conf. Series: Materials Science and Engineering,1757-899X
[50] A D Patange; Jegadeeshwaran R.; N C Dhobale.,”Milling cutter condition monitoring using machine learning approach” ,IOP Conf. Series: Materials Science and Engineering,1757-899X
[51] Graceson Jeriel Frederick; Sakthivel G; Jagadeeshwaran R,”Impact of Adaboost and Support Vector Machine Classifier in Automotive Sector” ,IOP Conf. Series: Materials Science and Engineering,1757-899X
[52] V.R. Ramkumar, G. Murali & #8288;, Neha P. Asrani and K. Karthikeyan,”Development of a novel low carbon cementitious two stage layered fibrous concrete with superior impact strength” ,Journal of Building Engineering,2352-7102
[53] T. Abirami, M. Loganaganandan, G. Murali, Roman Fediuk, R. Vickhram Sreekrishna, T. Vignesh, G. Januppriya, K. Karthikeyan,”Experimental Research on Impact Response of Novel Steel Fibrous Concretes Under Falling Mass Impact” ,Construction & Building Materials,0950-0618
[54] Neha P. Asrani1, G. Murali, Hakim S. Abdelgader, K. Parthiban, M. K. Haridharan and K. Karthikeyan,”Investigation on Mode I Fracture Behavior of Hybrid Fiber‑Reinforced Geopolymer Composites” ,Arabian Journal for Science and Engineering,1319-8025
[55] Karthikeyan K and Helen Santhi M,”Experimental Investigation on Precast Wall Connections” ,Journal of Advanced Research in Dynamical and Control Systems,1943-023X
[56] Karthikeyan K, Helen Santhi M & Chidambaram C R,”Behaviour of Horizontal Connections in Precast Walls under Lateral Loading” ,International Journal of Recent Technology and Engineering,2277-3878
[57] Graceson Jeriel Frederick , Sakthivel G and Jagadeeshwaran ,”Impact of Adaboost and Support Vector Machine Classifier in Automotive Sector” ,IOP: Materials Science and Engineering,ISSN: 1757-899X; Print ISSN: 1757-8981
[58] Soundararajan K., Janardhan Reddy K. ,”Cost-reduction and quality improvement using DMAIC in the SMEs” ,International Journal of Productivity and Performance Management,1741-0401
[59] M Elango and K Annamalai,”Machining Parameter Optimization of Al/SiC/Gr Hybrid Metal Matrix Composites usi” ,FME Transactions,1451-2092
[60] R.Harish,”CFD Analysis of Turbulent Heat Transfer Characteristics in Cubical Enclosure” ,International Journal of Engineering and Advanced Technology ,2249-8958
[61] Dev Nandwana*, Amrit Raj*, Tejas Deepak Kadkade* and Manavalla Sreekanth,”Exergy Analysis and Optimization of Gasifier-Solid Oxide Fuel Cell-Gas Turbine H” ,International Energy Journal,1513-718X
[62] R.Harish,”CFD Simulation of Natural Convection Flow and Heat Transfer Process in Rectangular cavity” ,International Journal of Engineering and Advanced Technology,2249 – 8958
[63] Muzammil S. Khan, Mahendra Singh Sisodia, Shubham Gupta, M. Feroskhan, S. Kannan and Karunamurthy Krishnasamy,”Measurement of tribological properties of Cu and Ag blended coconut oil nanoflui” ,Engineering Science and Technology,an International Journal,2215-0986
[64] P.Tamilselvan and G.Gangeya srinivasu,”Performance, Emission and Combustion Characteristics of VCR CRDI Diesel Engine F” ,International Journal of Automotive and Mechanical Engineering ,ISSN: 2229-8649 (Print); ISSN: 2180-1606 (online)
[65] M. Balakrishnan, N.R Jaladurgam, J. Magesh, R. Narayanan, Mol, Laxman,”Improved corrosion protection of titanium implant material by crystallographic t” ,Thin Solid Films,0040-6090
[66] S.Nair, A.Datta, R. Narayanan, A.Giridharan,”Investigation on EDM machining of Ti6Al4V with negative polarity brass ” ,Materials and Manufacturing Processes,1042-6914
[67] Sirajuddin Syed and Manimaran Renganathan,”NOx emission control strategies in hydrogen fuelled automobile engines” ,Australian Journal of Mechanical Engineering , Print ISSN: 1448-4846 Online ISSN: 2204-2253
[68] Venkatachalam, G., Vimalanand, S. and Vignesh, P,”Experimental and numerical investigation on the dynamic characteristics of thick” ,Archive of Applied Mechanics,0939-1533
[69] Vimalanand, S., Venkatachalam, G., Nikam, T.D., Jog, O.V., and Suryavanshi, R.T,”Determination of Vibrational Characteristics of Coir, Banana and Aloe Vera Fibre” , International Journal of Acoustics and Vibration,1027-5851
[70] Venkatachalam, G., Akshay, I., Giriraj, M., Vignesh, P., Aamer, A.K. and Rishi Dam,”The Effect of Fiber Size on Tensile Characteristics of Natural Fiber Reinforced ” ,Emerging Materials Research,20460155, 20460147
[71] Senthilnathan, N., Rajaannamalai, A. and Venkatachalam, G.,”Effect of Cobalt Addition on the Morphology and Mechanical Properties of W-Ni-Cu” ,Emerging Materials Research,20460155, 20460147
[72] Purushothaman Y, Humm J, Jebaseelan D, Yoganandan N,”Compression-based injury variables from chestbands in far-side impact THOR sled ” ,Traffic injury prevention,ISSN: 1538-9588 Online ISSN: 1538-957X
[73] Venkatachalam, G., Reddy, D.M., Tiwari, S., Satonkar, N. and Kovalan, S.,”Fracture and flexural analysis of sandwich panel with polypropylene honeycomb as” ,Materials Research Express,20531591
[74] Ramalingam M, Jebaseelan DD,”The effect of vibration characteristics of an automotive seating system on ride ” ,Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.,ISSN: 0954-4062
[75] Nilesh, S. and Venkatachalam, G,”A Review on Electromagnetic Sheet Metal Forming of Continuum Sheet Metals” ,SAE International Journal of Materials and Manufacturing,1946-3979, 1946-3987
[76] Vignesh, P., Reddy, D.M. and Venkatachalam, G,”Cellulose microfibrils from banana fibers: Characterization at different chemica” ,Materials Research Express,20531591
[77] Abhishek D. Patange, A. K. Bewoor, S. P. Deshmukh, S. S. Mulik, S. S. Pardeshi, R. Jegadeeshwaran,”Improving Program Outcome Attainments Using Project Based Learning approach” ,Journal of Engineering Education Transformations,2349-2473
[78] Abhishek D. Patange, A. K. Bewoor, S. P. Deshmukh, S. S. Mulik, S. S. Pardeshi, R. Jegadeeshwaran,”Improving Program Outcome Attainments Using Project Based Learning approach” ,Journal of Engineering Education Transformations,2349-2473
[79] Shankarganesh, P.S.P., Muralikannan, R.B and Venkatachalam, G.,”Vibration and damping characteristics of hybrid (glass- jute/ sisal/ hemp) fiber” ,Journal of the Balkan Tribological Association,13104772
[80] Vimalanand, S. and Venkatachalam, G., Ananda babu, A. and Balamurugan, R,”Dynamic characterization of the thickness-tapered laminated plant fiber-reinforc” ,advanced composite materials,09243046, 15685519
[81] Kadiyala Jhansi, Kondru Nagendra Babu, Lokavarapu Bhaskara Rao,”The Effect of Moisture on the Properties of Glass Fiber Polymer Matrix Composite” ,International Journal of Engineering and Advanced Technology,ISSN: 2249–8958
[82] Timir Patel, Ashutosh Dubey, Lokavarapu Bhaskara Rao,”Design and Analysis of an Epicyclic Gearbox for an Electric Drivetrain” ,International Journal of Recent Technology and Engineering,ISSN: 2277-3878
[83] S.Gurumoorthy, L.Bhaskara Rao,”Simulationand Experimental Substantiation of Beam Deflection under Guided End Co” ,International Journal of Innovative Technology and Exploring Engineering,ISSN: 2278-3075
[84] L. Natrayan, S. Yogeshwaran, L. Yuvaraj, and M. Senthil Kumar,”Effect of graphene reinforcement on mechanical and microstructure behavior of AA” ,AIP Conference Proceedings,1551-7616
[85] Senthil Kumar M, Vanmathi M, Senguttuvan G, Mangalaraja R V & Sakthivel G,”Fly ash constituent- silica and alumina role in the synthesis and Characterizati” ,SILICON,1876-990X

2018

[1] S. Parkhe, Annamalai K.,”Design and Analysis of Pressure Vessel Subjected to Pressure-temperature Variation” , International Journal of Engineering (IJE), IJE TRANSACTIONS A: Basics,1728-1431
[2] Balaji G, Annamalai K,”Numerical investigation of honeycomb filled crash box for the effect of honeycomb’s physical parameters on crashworthiness constants” , International Journal of Crashworthiness,1358-8265 (Print) 1754-2111 (Online)
[3] T. Muthuramalingam , M. Mohamed Rabik , D. Saravanakumar , and K. Jaswanth,”Sensor Integration-Based Approach for Automatic Fork Lift Trucks” , IEEE SENSORS JOURNAL,1530-437X
[4] Alamelu Mangai.M., Jegadeeshwaran R., Sugumaran V.,”Vibration Based Condition Monitoring of a Brake System Using Statistical Features with Logit boost and Simple logistic algorithm” , International Journal of Performability Engineering,0973-1318
[5] K Karunamurthy, Pranay Singh, Satyam Kumar, S Kumar,”FEASIBILITY STUDY OF CARBON CAPTURE AND STORAGE ON NLC INDIA LIMITED” , INTERNATIONAL JOURNAL OF AMBIENT ENERGY,0143-0750
[6] Inakollu Bhanu Harsha, Kasyap Addepalli, K Karunamurthy.,”HEAT TRANSFER AUGMENTATION ON IC ENGINE WASTE HEAT RECOVERY SYSTEM” , INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY,0976-6340
[7] N. Gobinath, T. Venugopal, Karthikeyan Palani, Anand A. Samuel,”Numerical modelling of thermophoresis in water-alumina nanofluid under pool boiling conditions” , International Journal of Thermal Sciences,ISSN: 1290-0729
[8] Feroskhan M and Saleel Ismail,”Optimization of performance and emissions in a biogas-diesel dual fuel engine with cerium oxide nanoparticle addition” , Institution of Mechanical Engineers Part D : Journal of Automobile Engineering,2041-2991
[9] Yarlagadda Ramshankar, Deivanathan R,”Development of Machine Vision System for Automatic Inspection of Vehicle Identification Number” , International Journal of Engineering and Manufacturing,23065982 & 23053631
[10] D. Devprakasam, A. Alfred Kirubaraj, D. Jackuline Moni, ,”Large scale fabrication of asymmetric 2D and 3D micro/nano array pattern structures using multi-beam interference lithography technique for Solar cell texturing application” , Microsystem Technologies,0946-7076
[11] Sachin V. Chavan, D. Devaprakasam,”Improving the Performance of Solar Photovoltaic Thermal System using Phase Change Materials – Review” , International Journal of Advanced Science and Engineering,2349 5359
[12] D. Saravanakumar, B. Mohan, T. Muthuramalingam, G. Sakthivel,”Performance evaluation of interconnected pneumatic cylinders positioning system” , Sensors and Actuators A: Physical,0924-4247
[13] D.Waman Waikar and R.Harish,”EFFECT OF VOLUMETRIC BLOCKAGE RATIO ON THERMAL PLUME CHARACTERISTICS IN HORIZONTAL CHANNEL” , International Journal of Mechanical Engineering and Technology, 0976-6359
[14] B. I. Darshandeep, R. Sivakumar, G. Sakthivel, S. Subramaniam & Jussi Oksanen,”Design and analysis to analyse the heat transfer of a space heater for a boat” , International Journal of Ambient Energy,ISSN: 0143-0750 (Print) 2162-8246 (Online)
[15] N.Gobinath, T.Venugopal, Karthikeyan Palani, Anand A.Samuel,”Numerical Modelling of Thermophoresis in Water-Alumina nanofluid during Pool Boiling Conditions” , International Journal of Thermal Sciences,ISSN:1290-0729
[16] Satishkumar R. and V. Sugumaran,”Estimation Of Remaining Life Of Bearings Using Rotation Forest And Random Committee Classification Models – A Statistical Learning Approach” , Pakistan Journal of Biotechnology,PISSN: 1812-1837, EISSN 2312-7791
[17] Ameet Singh , V. Sugumaran , G. Balamuruga Mohan Raj ,”OPTIMIZATION OF CYCLE TIME OF PALLETIZATION USING ABB ROBOT THROUGH PARTICLE SWARM OPTIMIZATION ALGORITHM AND TRANSLATIONAL APPROACH” , Pakistan Journal of Biotechnology,PISSN: 1812-1837, EISSN 2312-7791
[18] Anoop P S , V Sugumaran and Hemanth Mithun Praveen ,”ANALYZING VERTICAL VIBRATIONS OF AUTOMOBILE WHEEL HUB TO MONITOR TYRE PRESSURE USING STATISTICAL FEATURES AND SUPPORT VECTOR MACHINE ALGORITHM ” , Pakistan Journal of Biotechnology,PISSN: 1812-1837, EISSN 2312-7791
[19] More Vasudha, Panditrao Harshal, A. Joshuva, V Sugumaran* ,” EFFECT OF SAMPLING FREQUENCY AND SAMPLE LENGTH ON FAULT DIAGNOSIS OF WIND TURBINE BLADE ” , Pakistan Journal of Biotechnology,PISSN: 1812-1837, EISSN 2312-7791
[20] Indhu R , Sankaran R A , Sugumaran V ,”LIFETIME MAXIMIZATION OF WIRELESS SENSOR NETWORKS IN A WIND TURBINE ” , Pakistan Journal of Biotechnology,PISSN: 1812-1837, EISSN 2312-7791
[21] V.V. Ramalingam , S. Mohan, V. Sugumaran , B. Rebecca jeyavadhanam,”ARTIFICIAL LIMB MOVEMENT SYSTEM USING K-STAR ALGORITHM – A DISCRETE WAVELET TRANSFORMATION APPROACH ” , Pakistan Journal of Biotechnology,PISSN: 1812-1837, EISSN 2312-7791
[22] Anoop P.S. and V. Sugumaran ,”TYRE PRESSURE MONITORING SYSTEM USING STATISTICAL ANALYSIS AND ROTATION FOREST ALGORITHM ” , Pakistan Journal of Biotechnology,PISSN: 1812-1837, EISSN 2312-7791
[23] Ameet Singh , V. Sugumaran , G. Balamuruga Mohan Raj ,”OPTIMIZATION OF CYCLE TIME OF PALLETIZATION USING ABB ROBOT THROUGH SIMULATED ANNEALING ALGORITHM AND TRANSLATIONAL APPROACH ” , Pakistan Journal of Biotechnology,PISSN: 1812-1837, EISSN 2312-7791
[24] Sumedh Mulay , V. Sugumaran and S. Babu Devasenapati ,”MISFIRE DETECTION IN I.C. ENGINE USING MACHINE LEARNING APPROACH ” , Pakistan Journal of Biotechnology,PISSN: 1812-1837, EISSN 2312-7791
[25] S. Aravinth and V. Sugumaran ,”AIR COMPRESSOR FAULT DIAGNOSIS THROUGH STATISTICAL FEATURE EXTRACTION AND RANDOM COMMITTEE CLASSIFIER ” , Pakistan Journal of Biotechnology,PISSN: 1812-1837, EISSN 2312-7791
[26] Nikhil Subash Shewale, Deivanathan.R,”Modelling and Analysis of DC Motor Actuator for an Electric Gripper” , Journal of Engineering Science and Technology,1823-4690
[27] S. Sivarajan and R. Padmanabhan,”Improvement of Tribology in Sheet Metal Forming of High-Strength Steel Sheets by PVD-Coated Dies” , Materials Performance and Characterization,ISSN: 2379-1365
[28] Kolla Meheresh Gupta, Kamakoti Ramdev, Sai Dharmateja, S. Sivarajan,”Cutting Characteristics of PVD Coated Cutting Tools” , Materials Today:Proceedings,-
[29] Saket Mukund Pardeshi, A. Arockia Selvakumar, Vibhas Satyawan Tarfe,”Kinematic Analysis and Trajectory Planning of 4 DOF Articulated Manipulator” , Journal of Advanced Research in Dynamical & Control Systems,1943023
[30] Arockia Selvakumar, Govind, Pavan,”Kinematic Analysis of a T-3R Manipulator for Material Handling Applications” , Journal of Advanced Research in Dynamical & Control Systems,1943023
[31] Arockia Selvakumar, Harish, Saket,”Experimental Investigation on Position Analysis of 3RPR Parallel Manipulator” , Journal of Advanced Research in Dynamical & Control Systems,1943023
[32] G. Sakthivel, D. Saravanakumar, T. Muthuramalingam,”Application of failure mode and effect analysis in manufacturing industry -An integrated approach with FAHP-fuzzy TOPSIS and FAHP-fuzzy VIKOR” , Int. J. Productivity and Quality Management,ISSN online: 1746-6482 ISSN print: 1746-6474
[33] R. Manimaran & R. Thundil Karuppa Raj,”CFD SIMULATION OF FLOW FIELD AND HEAT TRANSFER IN A SINGLE-CYLINDER HCCI ENGINE AT DIFFERENT BOUNDARY CONDITIONS” , Computational Thermal Sciences,1940-2503
[34] M. Feroskhan, Saleel Ismail, M. Gopinatha Reddy, A. Sai Teja,”Effects of charge preheating on the performance of a biogas-diesel dual fuel CI engine” , Engineering Science and Technology, an International Journal,2215-0986
[35] M Feroskhan, Saleel Ismail, Siddhesh Gosavi, Pranil Tankhiwale and Yasir Khan,”Optimization of performance and emissions in a biogas diesel dual fuel engine with cerium oxide nanoparticle addition” , Part D: Journal of Automobile Engineering,ISSN: 0954-4070/ Online ISSN: 2041-2991
[36] M. Manjunatha, A. Arockia Selvakumar, Vivek P Godeswar, R. Manimaran,”A Low Cost Underwater Robot with Grippers for Visual Inspection of External Pipeline Surface” , Procedia Computer Science, International Conference on Robotics and Smart Manufacturing (RoSMa2018),1877-0509
[37] Radha R and Sreekanth D.,”Mechanical properties and Microstru cture evolution of quaternary Mg-6Al-3Ca-1Sn alloy ” , Materials today proceedings,2214-7853
[38] Pulkit Sharma, Arockia Selvakumar A,”Conceptual Design and Non-Linear Analysis of Triphibian Drone” , Procedia Computer Science,ISSN: 1877-0509
[39] Janet J Fernandes, Arockia Selvakumar A,”Kinematic and Dynamic Analysis of 3PUU Parallel Manipulator for Medical Applications” , Procedia Computer Science,ISSN: 1877-0509
[40] Seeja G, Arockia Selvakumar A, Berlin Hency V,”A Survey on Swarm Robotic Modeling, Analysis and Hardware Architecture” , Procedia Computer Science,ISSN: 1877-0509
[41] R.Harish,”Effect of heat source aspect ratio on turbulent thermal stratification in a naturally ventilated enclosure” , Building and Environment,0360-1323
[42] Roshan Abraham Joseph, G. Sakthivel,”Automated line integration from through hole technology to integrated circuit testing” , IOP: Materials Science and Engineering,Online ISSN: 1757-899X; Print ISSN: 1757-8981
[43] Warke Vivek Ramesh, G. Sakthivel,”SELECTION OF OPTIMUM FUEL BLEND IN AN IC ENGINE USING FAHP-PROMETHEE” , IOP: Materials Science and Engineering,Online ISSN: 1757-899X; Print ISSN: 1757-8981
[44] C.S.Rajamanickam,Dr.P.Tamilselvan, Dr.Anand .A.Samuel,”Challenges of Experimenting R1234YF Refrigerant for Automobile HVAC System- A review” , International Journal of Mechanical and Production Engineering Research and Development,2249-6890
[45] Gangadhar N., Kumar H., Narendranath S., Sugumaran V.,”Condition monitoring of single point cutting tools based on machine learning approach” , International Journal of Acoustics and Vibrations,1027-5851, 2415-1408
[46] S. Sivarajan and R. Padmanabhan,”Experimental Investigation of springback in forming of high strength steel using split ring test” , International Review of Mechanical Engineering,1970-8734
[47] Sai Kishore L, Mohanaditya Reddi, Joseph Daniel and M. Sreekanth,”THERMODYNAMIC STUDY OF A 250 MWE COMBINED CYCLE POWER PLANT AT FULL LOAD AND PART LOAD CONDITIONS” , International Journal of Mechanical Engineering and Technology , 0976-6359
[48] Ch,K,Rao, L. B. Rao,”Torsional Post-Buckling of a Simply Supported Thin-Walled Open-Section Beam Resting on a Two-Parameter Foundation” , Journal of Applied Mechanics and Technical Physics,1573-8620
[49] Venkateswara Rao R, Senthil Kumar M,”Experimental Investigation On Effect Of Welding Parameters On The Friction Stir Welding Of AA 6061″ , Materials today: Proceedings,2214-7853
[50] “4.Santhosh MS, Sasikumar R, Natrayan L, Senthil Kumar M, Elango V., Vanmathi M”,”Investigation Of Mechanical And Electrical Properties Of Kevlar/E-Glass And Basalt/E-Glass Reinforced Hybrid Composites” , International Journal of Mechanical and Production Engineering Research and Development, 2249-8001
[51] Shijo Thomas and Umasankar V.,”Effect of MWCNT reinforcement on the precipitation-hardening behavior of AA2219″ , International Journal of Minerals, Metallurgy and Materials,https://doi.org/10.1007/s12613-018-1546-2
[52] Lava Kumar Pillari , A. K. Shukla , S. V. S. Narayana Murty and V. Umasankar,”On the Comparison of Graphene and Multi-Wall Carbon Nanotubes as Reinforcements in Aluminum Alloy AA2219 Processed by Ball Milling and Spark Plasma Sintering” , Trans Indian Inst Met (2018),https://doi.org/10.1007/s12666-017-1245-0
[53] Umasankar.V , ShijoThomas,”Influence of Manufacturing Process on Distribution of MWCNT in Aluminium Alloy Matrix and Its Effect on Microhardness” , Materials Science Forum,ISBN CD: 978-3-0357-2296-
[54] Bhaskarrao Yakkala, R Narayanan and, Sreejith,”COMPUTATIONAL DENSITY FUNCTIONAL THEORY (DFT) APPROACH ON SMART CATALYSTS UTILIZED IN FUEL CELL TECHNOLOGY” , Journal : Engineering and Technology,0976-3104
[55] R.Narayanan and S.K.Seshadri,”Structure and Corrosion of High Voltage Anodic Oxide Coatings on Ti6Al4V Biomaterial” , Trans Indian Inst Metal,0972-2815
[56] R.Harish,”Buoyancy driven turbulent plume induced by protruding heat source in vented enclosure” , International Journal of Mechanical Sciences,0020-7403
[57] Vinod Handi, S. Jeyanthi and A. Giridharan,”Development of Automated Braking System for Collision Avoidance of Vehicles ” , International Journal of Vehicle Structures & Systems , 0975-3540 (Online)
[58] T. Jayakumar, K. Annamalai,”Investigation of Hot Tensile Behavior of Silicon Carbide and Magnesium Oxide Reinforced Aluminum Matrix Composites” , Silicon,1876-990X (Print) 1876-9918 (Online)
[59] M Senthil Kumar , L Natrayan , R D Hemanth , K Annamalai , E Karthick,”Experimental investigations on mechanical and microstructural properties of Al2 O3 /SiC reinforced hybrid metal matrix composite” , IOP Conference Series: Materials Science and Engineering,1757-899X
[60] Mukesh Chaudhari, Senthil Kumar M,”Reinforcement and Cutting Tools Interaction during MMC Machining – A Review” , Nano Hybrids and Composites,2297-3400
A. Joshuva , V. Sugumaran,”A Comparative Study for Condition Monitoring on Wind Turbine Blade using Vibration Signals through Statistical Features: aLazy Learning Approach” , International Journal of Engineering & Technology ,2227-524X
[61] A . Arockia Selvakumar ,”A Numerical Approach for 3 PRS Parallel Manipulator” , International Journal of Engineering & Technology,2227-524X
[62] Rao C.K., Rao L.B.,”Torsional Post-Buckling of a Simply Supported Thin-Walled OpenSection Beam Resting on a TwoParameter Foundation” , Journal of Applied Mechanics and Technical Physics,1573-8620
[63] Pranesh V.,Balasubramanian S.,Mahalingam S.,Ravikumar S., MichaelT.C., Kanimozhi B.”,”Ignition Behavior of Benzoic Resin Solid Fuel Pellets over a Surface Induction Heating Plate Using a Liquefied Petroleum Gas Flame Ignitor” , Energy and Fuels,1520-5029
[64] Ramalingam M., Patel R., Thirumurugan M.A.,Jebaseelan D.D.,Jebaraj C.”,”Control policies used for semi-active damper for automotive seating system: a review” , “International Journal of Dynamics and Control”,2195-2698
[65] Handi V., Jeyanthi S., Giridharan A.,”Development of automated braking system for collision avoidance of vehicles” , “International Journal of Vehicle Structures and Systems”,0975-3540
[66] Waman Waikar D., Harish R.,”Effect of volumetric blockage ratio on thermal plume characteristics in horizontal channel” , “International Journal of Mechanical Engineering and Technology”,0976-6359
[67] Radha R., Jafferson J.M., Darshan G.,”Effect of solution treatment on microstructure, mechanical and wear characteristics of gravity die cast aluminium alloy” , ARPN Journal of Engineering and Applied Sciences,1819-6608
[68] Janardhan Reddy K.,Mahendra Reddy G.,Raghukiran N.”,”Productivity improvement by line balancing and process modification keeping quality intact” , “International Journal of Productivity and Quality Management”,1746-6482
[69] Karunamurthy K., Singh P., Kumar S., Kumar S.,”Feasibility study of carbon capture and storage on NLC India Ltd” , International Journal of Ambient Energy,2162-8246
[70] Madhu Sudana Sankar K., Vignesh S.,Karunamurthy K.”,”Heat pipes for enhancing the performance of thermal systems: A review ” , “International Journal of Mechanical Engineering and Technology”,0976-6359
[71] Arunkumar M.P., Pitchaimani J., Gangadharan K.V.,Leninbabu M.C.”,”Vibro-acoustic response and sound transmission loss characteristics of truss core sandwich panel filled with foam”, Aerospace Science and Technology,1270-9638
[72] Atul S T., Babu M.C.L.,”A review on effect of thinning, wrinkling and spring-back on deep drawing process” , “Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture”,2041-2975
[73] “George N., Pitchaimani J., Murigendrappa S.M.,Lenin Babu M.C.”,”Vibro-acoustic behavior of functionally graded carbon nanotube reinforced polymer nanocomposite plates” , “Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications”, 2041-3076
[74] Subramanian B., Ismail S.,”Production and use of HHO gas in IC engines” , International Journal of Hydrogen Energy,1879-3487
[75] Sivarajan S.,Padmanabhan R,”Experimental investigation of springback in forming of high strength steel using split-ring test” , International Review of Mechanical Engineering,2532-5655
[76] Raghukiran N., Sujith R., Agrawal H., Shabadi R., Kumar R.,”In situ age hardening and grain refinement in as-sprayed Al-Sc binary alloy deposits” , Journal of Alloys and Compounds,1873-4669
[77] Feroskhan M., Ismail S., Gosavi S., Tankhiwale P., Khan Y.,”Optimization of performance and emissions in a biogas–diesel dual fuel engine with cerium oxide nanoparticle addition” , “Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering”,2041-2991
[78] Feroskhan M., Ismail S., Reddy M.G., Sai Teja A.”,”Effects of charge preheating on the performance of a biogas-diesel dual fuel CI engine” , “Engineering Science and Technology, an International Journal”,2250-3498
[79] “Sivaraja C.M.,Sakthivel G., Warke V.R.,”Selection of optimum fuel blend to empower the energy efficiency in IC engine using decision system” , “Energy Sources, Part A:Recovery, Utilization and Environmental Effects”,1556-7230
[80] “Magdum S.J., Sivakumar R., Sakthivel G., Das A.,”DOE study of ‘the effect of various parameters on fuel tank sloshing using multiphase CFD’” , International Journal of Ambient Energy,2162-8246
[81] Gangadhar K., Kannan T., Sakthivel G.,Dasaradha Ramaiah K.,”Unsteady free convective boundary layer flow of a nanofluid past a stretching surface using a spectral relaxation method ” , “International Journal of Ambient Energy “,2162-8246
[82] “Sakthivel G.,Saravanakumar D.,Muthuramalingam T.,”Application of failure mode and effect analysis in manufacturing industry – An integrated approach with FAHP-fuzzy TOPSIS and FAHP-fuzzy VIKOR” , “International Journal of Productivity and Quality Management”,1746-6482
[83] Gangadhar K., Kannan T., Dasaradha Ramaiah K., Sakthivel G.,”Boundary layer flow of nanofluids to analyse the heat absorption/generation over a stretching sheet with variable suction/injection in the presence of viscous dissipation” , International Journal of Ambient Energy,2162-8246
[84] Muthuramalingam T., Rabik M.M., Saravanakumar D., Jaswanth K.,”Sensor integration based approach for automatic fork lift trucks” , IEEE Sensors Journal,1558-1748
[85] Prasob P.A., Sasikumar M.,”Static and dynamic behavior of jute/epoxy composites with ZnO and TiO2 fillers at different temperature conditions” , Polymer Testing,1873-2348
[86] Sasikumar M., Balaji R.,Vinothkumar M.,”Nanoparticles-coated glass fibre–based damage localisation and monitoring system for polymer composites” , Structural Health Monitoring ,1741-3168
[87] Murali G., Karthikeyan K., Ramkumar V.R.,”Reliability analysis of impact failure energy of fibre reinforced concrete using well distribution” , Journal of Applied Science and Engineering,1560-6686
[88] Santhosh M.S.,Sasikumar R., Natrayan L., Senthil Kumar M.,Elango V., Vanmathi M.”,”Investigation of mechanical and electrical properties of kevlar/E-glass and basalt/E-glass reinforced hybrid composites” , “International Journal of Mechanical and Production Engineering Research and Development”,2249-8001
[89] Murali G., Indhumathi T.,Karthikeyan K.,Ramkumar V.R”,”Analysis of flexural fatigue failure of concrete made with 100% coarse recycled and natural aggregates” , Computers and Concrete,1598-818X
[90] Natrayan L., Kumar M.S., Palanikumar K.,”Optimization of squeeze cast process parameters on mechanical properties of Al2O3/SiC reinforced hybrid metal matrix composites using taguchi technique” , Materials Research Express ,2053-1591
[91] Murali G., Venkatesh J., Lokesh N., Nava T.R., Karthikeyan K.,”Comparative Experimental and Analytical Modeling of Impact Energy Dissipation of Ultra-High Performance Fibre Reinforced Concrete ” , KSCE Journal of Civil Engineering ,1976-3808
[92] Murali G., Karthikeyan K., Haridharan M.K.,”Statistical scrutiny of variations in impact strength of green high performance fibre reinforced concrete subjected to drop weight test” , “Revista Romana de Materiale/ Romanian Journal of Materials “,1583-3186
[93] Yadav L., Dondapati S.,”Effect of calcium on mechanical and tribological properties of Mg-Sn alloy system fabricated by powder metallurgy (PM) process”, Materials Today: Proceedings, 2214-7853
[94] Senthil Kumar P., Sridhar Babu B., Sugumaran V.,”Comparative modeling on surface roughness for roller burnishing process, using fuzzy logic” , International Journal of Mechanical and Production Engineering Research and Development,2249-8001
[95] Joshuva A., Sugumaran V.,”A study of various blade fault conditions on a wind turbine using vibration signals through histogram features” , Journal of Engineering Science and Technology,1823-4690
[96] Manju B.R., Joshuva A., Sugumaran V.,”A data mining study for condition monitoring on wind turbine blades using hoeffding tree algorithm through statistical and histogram features” , International Journal of Mechanical Engineering and Technology,0976-6359
[97] Rajamanickam C.S.,Tamil Selvan P., Samuel A.A.,”Challenges of experimenting r1234yf refrigerant for automobile hvac system – A review” , International Journal of Mechanical and Production Engineering Research and Development,2249-8001
[98] RAM KISHORE SANKARALINGAM, FERROSKHAN, SALEEL ISMAIL and VENUGOPAL T,”EXPERIMENTAL STUDIES ON PREMIXED CHARGE COMPRESSION IGNITION (PCCI) ENGINE USING PORT INJECTION OF HEATED DIESEL” , Journal of Engineering Science and Technology,1823-4690
[99] S. Aravinth and V. Sugumaran,”Air compressor fault diagnosis through statistical feature extraction and random forest classifier ” , Progress in Industrial Ecology – An International Journal, Vol. 12, Nos. 1/2, 2018 ,1478-8764
[100] Alamelu Mangai, M., Jegadeeshwaran, R., Sugumaran, V. ,”Vibration based condition monitoring of a brake system using statistical features with logit boost and simple logistic algorithm” , International Journal of Performability Engineering,ISSN, 09731318
[101] U.Manoj Kumar, D.Pradeep Reddy, Rohan Rajesh Patel, M.Senthil Pandian, K Karthikeyan,”A STUDY ON FLEXURAL CAPACITY OF STEEL BEAMS WITH CORRUGATED WEB” , International Journal of Civil Engineering and Technology (IJCIET),ISSN Print: 0976-6308 and ISSN Online: 0976-6316.
[102] Madhusudana Sankar,”HEAT PIPES FOR ENHANCING THE PERFORMANCE OF THERMAL SYSTEMS: A REVIEW” , International Journal of Mechanical Engineering and Technology,0976-6340
[103] D. Saravanakumar, B. Mohan, T. Muthuramalingam, G. Sakthivel,”Performance evaluation of interconnected pneumatic cylinders positioning system” , Sensors and Actuators A: Physical, ISSN/ISBN Nos: 0924-4247

2017

[1] G. Sakthivel and M.Ilangkumaran,”Optimisation of compression ignition engine performance with fishoil biodiesel using Taguchi-Fuzzy approach” , International Journal of Ambient Energy,ISSN: 0143-0750 (Print) 2162-8246 (Online)
[2] V. Kathiroli, P. Akshath Saboo, S. S. Subramanian, S. Sivarajan,”Design and Analysis of single point cutting tool based on various insert shapes” , TRANSIST ONLINE,E-ISSN: 2456-5075
[3] R. Manimaran,”Computational analysis of flow features and energy separation in a counter-flow vortex tube based on number of inlets” , Energy,0360-5442
[4] Arunkumar, M.P., Pitchaimani, J., Gangadharan, K.V., Lenin Babu, M.C.,”Sound transmission loss characteristics of sandwich aircraft panels: Influence of nature of core” , Journal of Sandwich Structures and Materials,10996362
[5] R. Balaji,”Structural Health Monitoring (SHM) System for Polymer Composites: A Review” , Indian Journal of Science and Technology,0974-6846
[6] Arunkumar,Jeyanthi,”DESIGN AND ANALYSIS OF IMPEDANCE TUBE FOR SOUND ABSORPTION MEASUREMENT” , ARPN Journal of Engineering and Applied Sciences,ISSN 1819-6608
[7] JITHESH SUKLA,JEYANTHI,”Design and Analysis of Lifting Pusher Drop Axle for Heavy Commercial Vehicle” , SAE INT JOURNAL OF COMMERCIAL VEHICLE,1946391X
[8] D. Saravanakumar, B. Mohan, T. Muthuramalingam,”A review on recent research trends in servo pneumatic positioning systems” , Precision Engineering,0141-6359
[9] Abu Bakr Azam, Akshay Narasimhan S., B. Hariprasath, Pratibha Nalini R,”Analysis of cast iron machine parts” , International Journal of Scientific Engineering and Research,2347-3878
[10] Sivarajan S and Padmanabhan R,”TRIBOLOGICAL EVALUATION OF WEAR RESISTANT PVD COATINGS ” , Journal of Manufacturing Engineering,1583-7904
[11] D. Devaprakasam, U. Satheesh, P. Prakash,”Effects of perfluoroalkylsilane molecular assembly on flow induced voltage generated by doped silicon wafers” , JOURNAL OF APPLIED PHYSICS ,0021-8979
[12] P. Kumaran, S. Mohanamurugan, P. Shankar and R. Narayanan,”Investigation of urea decomposition and uniform concentration of urea water solution in SCR system for diesel engine exhaust using CFD” , Rasayan Journal of Chemistry,ISSN: 0974-1496
[13] R Manimaran, K Karunamurthy,”Optimization of an Air-Conditioned Flow in a Residential Apartment for Thermal Comfort” , International Journal of Pure and Applied Mathematics,1314-3395
[14] Caroline Ponraj, Vinitha G, Joseph Daniel,”A review on the visible light active BiFeO3 nanostructures as suitable photocatalyst in the degradation of different textile dyes” , Environmental Nanotechnology, Monitoring & Management,ISSN: 2215-1532
[15] P.Tamilselvan & C.S.Rajamanickam,”MULTIPHASE SIMULATION OF AUTOMOTIVE HVAC EVAPORATOR USING R134A AND R1234YF REFRIGERANTS ” , International Journal of Mechanical Engineering and Technology (IJMET) ,0976-6340
[16] K KARUNAMURTHY, NAYAN SINGH, VIVEK SINGH”EXPERIMENTAL STUDY ON IN-POND HEAT EXCHANGER PROVIDED WITH TWISTED TAPES” , Asian Journal of Pharmaceutical and Clinical Research, 2455-3891
[17] Jainam S Shah and K. Karthikeyan,”Study of Progressive Collapse Analysis of Transfer Girder System RCC Building” , International Journal of Civil Engineering and Technology (IJCIET),ISSN Print: 0976-6308 and ISSN Online: 0976-6316
[18] Murali G, Monika Vincy T, Suraj K, Ramkumar V. R and Karthikeyan K”Assessment of Impact Strength of Fibre Reinforced Concrete by Two Parameter Weibull Distribution” , ARPN Journal of Engineering and Applied Sciences,ISSN 1819-6608
[19] Sriram. V, Konakanchi Sirisha, Keerthi Prakash. R, Murali. G, Haridharan. M.K and Karthikeyan. K”A New Method To Estimate Weibull Parameter For The Fatigue Life of Self Compacting Fibre Reinforced Concrete Beams” , International Journal of Civil Engineering and Technology (IJCIET),ISSN Print: 0976-6308 and ISSN Online: 0976-6316
[20] Feroskhan M. and Saleel Ismail,”Evaluating the Influence of Biogas Flow Rate and Addition of Cerium Oxide Nanoparticles on the Performance of a Dual Fuel Engine Using Taguchi Method” , Nano Hybrids and Composites,2297-3400
[21] C.M. Sivaraja, G.Sakthivel”Compression ignition engine performance modelling using hybrid MCDM techniques for the selection of optimum fish oil biodiesel blend at different injection timings” , ENERGY,ISSN: 0360-5442
[22] Gobinath N.* and Karthikeyan C.P.,”Numerical Modeling of Thermophoresis and Diffusiophoresis in Water-Alumina Nano Fluids” , Nano Hybrids and Composites ,2297-3400
[23] Gobinath N. and Karthikeyan C.P.* ,”Heating and Cooling Mechanisms of Nano Fluids” , Nano Hybrids and Composites ,2297-3400
[24] Mohammed Ajmal A., SunirMajilya, Bharath Kumar H., N. Gobinath,”Investigation of tribological characteristics of Polyol Ester- Copper Oxide nanolubricant ” , International Journal of ChemTech Research ,0974-4290
[25] Rohith S, Chidambaram C R, Karthikeyan K and Helen Santhi M,”A Study on Hybrid Precast walls” , IOP Conf. Series: Earth and Environmental Science,1755-1315
[26] A Sai Kumar, G Ganesan and K Karthikeyan,”An Experimental Evaluation of Mechanical Properties of Hybrid Reinforcements” , IOP Conf. Series: Earth and Environmental Science,1755-1315
[27] Christo Michael T*, Sushrut Bugde, Srikanth K,”Determination of safe stress limit of High-Pressure pipe bends used in chemical industries” , Journal of Chemical and Pharmaceutical Sciences,0974-2115
[28] M. Rachit Rajesh, B. Vijaypal, Ayush Kumar,”Thermal Conductivity and Charging & Discharging Characteristics of a Thermal Energy Storage System Blended with Al2O3 Nanoparticles” , Nano hybrids and Composites,2297-3400
[29] NATESAN S.JEYANTHI,”REVIEW ON DESIGN OF AUGMENTED TURBINE BLADE FOR LOW WIND SPEED URBAN AREA ” , INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY,0976-6359
[30] G. Balaji and K. Annamalai,”An experimental and numerical scrutiny of crashworthiness variables for square column with V-notch and groove initiators under quasi-static loading ” , Cogent Engineering ,2331-1916
[31] Ajinkya Shirurkar, Arshad Tamboli, Priyanka N Jagtap, Sreekant Dondapati, Davidson J D”Mechanical Behavior of ZM21 Magnesium Alloy Locking Plates An Experimental and Finite Element Study” , Materials Today: Proceedings,ISSN 2214-7853
[32] JayapragasanC N, K Janardhan Reddy,”Numerical Investigation of the Inner Flow in Centralized Fluffs Collection using CFD ” , International Journal of Performability Engineering,DOI: 10.23940/ijpe.17.01.p1.0318
[33] Jayapragasan C N, K Janardhan Reddy”Design Optimization and Experimental Study on the Blower for Fluffs Collection System” , Journal of Engineering Science and Technology,1823-4690
[34] Akash Pravin Karote and Deivanathan.R,”Processing and Assessment of Silver and Copper Wires for Thermoelectric Effect” , ECS Journal of Solid State Science and Technology,2162-8769
[35] Nikhil SS and Deivanathan R,”Modelling and Simulation of Anti-lock Braking System” , International Journal of Engineering and Technical Research,2454-4698
[36] R.D. HEMANTH, M. SENTHIL KUMAR, AJITH GOPINATH & L. NATRAYAN,”EVALUATION OF MECHANICAL PROPERTIES OF E-GLASS AND COCONUT FIBER REINFORCED WITH POLYESTER AND EPOXY RESIN MATRICES” , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ,ISSN(Print) : 2249-6890 ISSN(Online) : 2249-8001
[37] Karthick E, Joel Mathai, Michael Tony J & Senthil Kumar Marikkannan,”Processing, Microstructure and Mechanical Properties of Al2O3 and SiC Reinforced Magnesium Metal Matrix Hybrid Composites” , Materials Today: Proceedings,ISSN 2214-7853
[38] Sreekanth Dondapati, Mudit Trivedi, Raja Sekhar Dondapati, Divya Chandra,”Investigation on the mechanical stresses in a muffler mounting bracket using Root Cause Failure Analysis (RCFA), finite element analysis and experimental validation” , Engineering Failure Analysis,13506307
[39] Raja Sekhar Dondapati, Abhinav Kumar, Gadekula Rajesh Kumar, Preeti Rao Usurumarti, Sreekanth Dondapati”Superconducting magnetic energy storage (SMES) devices integrated with resistive type superconducting fault current limiter (SFCL) for fast recovery time” , Journal of Energy Storage,2352-152X
[40] Udit Purohit and Amol Mathur, Sreekanth Dondapati,”EFFECT OF THICKNESS OF PLASMA SPRAYED CERAMIC COATING ON THE HEAT FLUX VARIATIONS OF ALUMINIUM ALLOY PISTON – FINITE ELEMENT ANALYSIS” , International Journal of Mechanical Engineering and Technology,0976 – 6340
[41] Lava Kumar Pillari, A. K. Shukla, S. V. S. Narayana Murty and V. Umasankar,”Processing and Characterization of Graphene and Multi-wall Carbon Nanotube-Reinforced Aluminium Alloy AA2219 Composites Processed by Ball Milling and Vacuum Hot Pressing” , Microstructure and Metallography Analysis ,21929270
[42] Muhammed Favas M K, Thomas George Panicker, V. Umasankar,”Synthesis and Testing of AA2014-Al2O3 (alpha) Nano-Composite” , Journal of Chemical and Pharmaceutical Sciences,ISSN: 0974-2115
[43] Michael Sukham, Umasankar V,”Wear Analysis of DLC Coated Magnesium Composite for Biomedical Application” , Journal of Chemical and Pharmaceutical Sciences,ISSN: 0974-2115
[44] Shijo Thomas and Umasankar. V,”‘Effect on hardness and densification of mwcnt reinforced aa2219 composites sintered in different methods” , ARPN Journal of Engineering and Applied Sciences,ISSN 1819-6608
[45] Shijo Thomas and Umasankar. V,”EFFECT ON HARDNESS AND DENSIFICATION OF MWCNT REINFORCED AA2219 COMPOSITES SINTERED IN DIFFERENT METHODS” , ARPN Journal of Engineering and Applied Sciences,ISSN 1819-6608
[46] A Joshuva, V Sugumaran,”A data driven approach for condition monitoring of wind turbine blade using vibration signals through best-first tree algorithm and functional trees algorithm: A comparative study” , ISA Transactions,ISSN: 0019-0578
[47] A Joshuva, V Sugumaran,”Classification of Various Wind Turbine Blade Faults through Vibration Signals Using Hyperpipes and Voting Feature Intervals Algorithm” , International Journal of Performability Engineering,9731318
[48] R. SATISHKUMAR, V. SUGUMARAN,”REMAINING LIFE TIME PREDICTION OF BEARINGS USING K-STAR ALGORITHM A STATISTICAL APPROACH ” , Journal of Engineering Science and Technology ,18234690
[49] Pranesh S K, Siju Abraham, V. Sugumaran, M. Amarnath,”Fault Diagnosis of helical gearbox using acoustic signals and wavelets” , IOP Conference Series: Materials Science and Engineering/Frontiers in Automobile and Mechanical Engineering,1757-8981
[50] M. Feroskhan & Saleel Ismail,”Evaluating the effect of intake parameters on the performance of a biogas diesel dual fuel engine using the Taguchi method” , Biofuels, 1759-7277
[51] V. M. Gobinath and K. Annamalai,”Experimental investigation on chilled cast iron tappet manufacturing processes parameters” , Materials and Manufacturing Processes,1042-6914
[52] K. Abinav, P. Palani Rajeshwar, Jerry S Punnoose, Joseph Daniel, M. Sreekanth,”Heat Transfer Enhancement in a Smart Phone” , INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH AND APPLICATION,2248-9622
[53] G. Sakthivel, R. Sivakumar, N. Saravanan, Bernard W. Ikua,”A decision support system to evaluate the optimum fuel blend in an IC engine to enhance the energy efficiency and energy management” , Energy,ISSN: 0360-5442
[54] Aditya Vishwas Kanade, Arockia Selvakumar A, Dnyanesh Jalamkar,Prabaharan Sengodan, Yousef Hasan F. Jbara,”Development of IoT Controlled Agri-Rover for Automatic Seeding” , International Journal of Pure and Applied Mathematics,1311-8080
[55] Muttepwar Venkatesh V, Gaurav Naleshwarkar, Arockia Selvakumar A,”Gesture Control Robot With Adaptive Gripper” , International Journal of Pure and Applied Mathematics,1311-8080
[56] Saket M. Pardeshi, Prajakta P. Pachore, Pratibha Nalini, R Arockia Selvakumar A,”Development of Low Cost Printable Modular Robot” , International Journal of Pure and Applied Mathematics,1311-8080
[57] Kashish Gupta, Nitesh Jaiswal, V.Berlin Hency, Arockia Selvakumar A,”DEVELOPMENT OF AUTOMATED SENSING SYSTEM TO AID RESCUE OPERATIONS AFTER AN EARTHQUAKE” , International Journal of Mechanical Engineering and Technology,0976-6359
[58] Sasikumar, Balaji,”Development of strain and damage monitoring system for polymer composites with embedded nickel alloys” , Measurement,0263-2241
[59] Sasikumar, Balaji,”A nanometallic nickel-coated, glass-fibre-based structural health monitoring system for polymer composites” , Smart Materials and Structures,0964-1726
[60] Chellapilla Kameswara Rao, Lokavarapu Bhaskara Rao,”Torsional post-buckling of thin-walled open section clamped beam supported on Winkler-Pasternak foundation” , Thin Walled Structures,ISSN: 0263-8231
[61] Chellapilla Kameswara Rao, Lokavarapu Bhaskara Rao,”Nonlocal Critical Velocities of Fluid Conveying Clamped-Pinned Single-Walled Carbon Nanotubes Subjected to Axial Magnetic Field” , Engineering Transactions,0867-888X
[62] Dhiraj P. Badgujar, K. Srinivasan, P. Vasundhra, R. Murugesan, and L. Bhaskara Rao,”Geometric Scaling of Plates Subjected to Mine Blast” , Defence Science Journal, 0011-748X
[63] Bishal Saha Chowdhury and Nadimpalli Raghukiran,”Autonomous Sprinkler System with Internet of Things” , International Journal of Applied Engineering Research,0973-4562
[64] Anand Prabu Kalaivanan, Gnanasekaran Sakthivel,”Self-tuning genetic algorithm to achieve maximum thermal efficiency by monitoring combustion characteristics with vibration/acoustic sensors” , SAE TECHNICAL PAPER,ISSN 0148-7191
[65] Feroskhan M and Saleel Ismail,”Evaluating the effect of intake parameters on the performance of a biogas-diesel dual fuel engine using Taguchi method” , Biofuels (Taylor & Francis),1759-7269
[66] Ram Kishore S, Venugopal T and Saleel Ismail,”A simple and cost effective electronic fuel injection system for reactivity controlled compression ignition (RCCI) engines” , SAE Technical Papers,1487191
[67] SHREYAS,JEYANTHI,PRASSAD,”Impact Analysis of Side Door Beam in Automobile Using FEA” , International Journal of Control Theory and Applications,ISSN : 0974-5572
[68] G. Sakthivel, Bernard W. Ikua,”Failure mode and effect analysis using fuzzy analytic hierarchy process and GRA TOPSIS in manufacturing industry” , Int. J. Productivity and Quality Management,ISSN online: 1746-6482; ISSN print: 1746-6474
[69] K B Rajasekarababu, Vinayagamurthy, Ilamurugan,”A Review on cross flow Vibration” , International Journal of Applied Engineering Research,0973-4562
[70] P.S. Premkumar, S Nadaraja Pillai, S Arunvinthan, S.Sivaraja, G.Vinayagamurthy,”STUDY ON INFLUENCE OF OPERATING WIND TURBINE ON UPSTREAM AND DOWNSTREAM FLOW USING K-EPSILON TURBULENCE MODEL” , Journal of Advanced Research in Dynamical and Control Systems,1943-023X
[71] S.T.G.KRISHNA TEJA, C.P.KARTHIKEYAN & M.B.SHYAM KUMAR,”Investigation of Radiative Cooling using a Photonic Composite Material for Water Harvesting” , INTERNATIONAL JOURNAL OF ENGINEERING, TRANSACTIONS A : BASICS,1025-2495, 1735-9244, 1728-1431
[72] R Radha, D Sreekanth”Insight of Magnesium alloys and composites for orthopedic implant applications” , Journal of Magnesium and alloys (ELSEVIER),2213-9567
[73] Navneet Bohara, Jegadeeshwaran. R, and Sakthivel G “Carbide Coated Insert Health Monitoring Using Machine Learning Approach through Vibration Analysis” , International Journal of Prognostics and Health Management,2153-2648
[74] Akhilesh Khurana, Aniket N. Chavan and R. Jegadeeshwaran “Design of a gear for stress dissipation” , Recent patents on Mechanical Engineering,1874-477X
[75] T. Christo Michael, AR. Veerappan and S. Shanmugam”Suitability of assumed cross sections to include ovality in the limit analysis of pipe bends under in-plane closing moment and internal pressure” , Thinned-Walled Structures,ISSN: 0263-8231
[76] “38.Gurumorthy, Lokavarapu Bhaskara Rao,”Nonlinear stability analysis of 3D beams” , International Journal of Civil Engineering and Technology,0976 – 6308
[77] Chellapilla Kameswara Rao, Lokavarapu Bhaskara Rao,”Critical velocities in fluid-conveying single-walled carbon nanotubes embedded in an elastic foundation” , Journal of Applied Mechanics and Technical Physics,0021-8944
[78] M. Umashankar, K. Annamalai,”Investigation of Transition in Sliding Wear Resistance of Nickel based Zinc Alloy” , Materials Today: Proceedings,2214-7853
[79] M. Umashankar, K. Annamalai,”Investigation on Ni-modified ZA alloy for Damping properties” , Materials Today: Proceedings,2214-7853
[80] V. M. Gobinath and K. Annamalai,”Effect of Inoculation in Chilled Cast Iron with Different Chill” , Materials Today: Proceedings,2214-7853
[81] Tarwadi Parag Jitendra, Arockia Selvakumar Arockia Doss, Juan Antonio Corrales Ramon,”Manipulation and Path Planning for KUKA (LWR/LBR 4+) Robot in a Simulated and Real Environment” , Journal of Automation, Mobile Robotics & Intelligent Systems,eISSN 2080-2145
[82] M. Feroskhan and Saleel Ismail,”A review on the purification and use of biogas in compression ignition engines” , International Journal of Automotive and Mechanical Engineering,ISSN: 2229-8649 (Print); ISSN: 2180-1606 (Online)
[83] Manish Chaudhari,”DETERMINING THE EFFECT OF COATED AND UNCOATED TOOL INSERT DURING TURNING OF EN31 STEEL” , International Journal of Mechanical Engineering and Technology,0976 – 6340
[84] Vasudevan Rajamohan,”Dynamic Characterization of CNT-Reinforced Hybrid Polymer Composite Beam” , Polymer Composites,1548-0569
[85] Vipin V. Gopal, and L.B, Rao,”Design and analysis of centrally mounted rotary fixture” , International Journal of Computer Aided Engineering and Technology,1757-2665
[86] Lokavarapu Bhaskara Rao.Chellapilla Kameswara Rao,”Exact Closed-Form Solution of Vibrations of a Generally Restrained Circular Plate with Crack and Weakened along an Internal Concentric Circle” , International Journal of Acoustics and Vibration,1027-585
[87] P.V.N.Venkata Mallikarjuna, Lokavarapu Bhaskara Rao, P. Satish Babu,”Thermo-mechanical analysis of the pressure plate of clutch” , Mediterranean Journal of Modeling and Simulation,2335-1357
[88] Arockia Selvakumar A,”A Review on the Kinematic Simulation and Analyses of Parallel Manipulators” , Robotics & Automation Engineering Journal,2577-2899
[89] R.Prabhu, L.Natrayan, M.Senthil Kumar,”Modeling and Cyclic Stress Analysis of Automotive Alloy Wheel Rim” , International Journal of Research, 2348-6848
[90] M. VANMATHI, I. MOHAMED, S. K. MARIKKANNAN, M. VENKATESWARLU,”SYNTHESIS AND ELECTRICAL CHARACTERIZATION OF ALUMINIUM DOPED ZINC OXIDE THIN FILMS” , Journal of Ovonic Research,1584 – 9953
[91] R. Venkateswar Rao, M. Senthil Kumar, E. Shirisha,”Optimize The Process Parameters Of Friction Stir Welded AA2014 and AA6061 Dissimilar Aluminium Alloys By Minitab software” , Journal of Mechanical and Civil Engineering,2278-1684
[92] Takalkar Atul S and M C Lenin Babu,”Investigation into Erosion Rate of Crater during Wire Electrical Discharge Turning Process” , Journal of Machining Science and Technology ,1091-0344
[93] A S S Balan and A.Giridharan,”A progress review in wire electrical discharge machining process” , International Journal of Automotive and Mechanical Engineering,2229-8649
[94] Nandagopal.N, Perry Prasanth D and A.Giridharan,”A New Approach for Vehicle Maneuverability using Steer by Touch Technology” , International Journal of Mechanical Engineering and Technology, 0976 – 6340
[95] Alamelu Manghai T M, R Jegadeeshwaran, V Sugumaran,”Brake Fault Diagnosis Through Machine Learning Approaches A Review” , Structural Durability and Health Monitoring,1930-2991
[96] Alamelu Manghai T M, R Jegadeeshwaran,”Feature-Based Vibration Monitoring of a Hydraulic Brake System Using Machine Learning” , Structural Durability and Health Monitoring,1930-2991
[97] M. Sasikumar, R. Balaji,”Graphene based sytrain and damage prediction system for polymer composites” , Composites-Part A,1359-835X
[98] Murali, G., Gayathri, R., Ramkumar, V.R., Karthikeyan, K,”Two statistical scrutinize of impact strength and strength reliability of steel Fibre-Reinforced Concrete” , KSCE Journal of Civil Engineering,1976-3808
[99] G Murali, V R Ramkumar and K Karthikeyan,”The Effects of Impact Loading on the Flexural Strength of Fibre Reinforced Concrete” , Journal of Scientific & Industrial Research,0975-1084
[100] Murali G, Muthulakshmi T, Nycilin Karunya N, Iswarya R, Hannah Jennifer G, and Karthikeyan K,”Impact Response and Strength Reliability of Green High Performance Fibre Reinforced Concrete Subjected to Freeze-thaw Cycles in NaCl Solution” , Materials Science,1392–1320
[101] Murali G, Venkatesh J, Lokesh N, Nava Teja Reddy, and Karthikeyan K,”Comparative Experimental and Analytical Modeling of Impact Energy Dissipation of Ultra-High Performance Fibre Reinforced Concrete” , KSCE Journal of Civil Engineering,1976-3808
[102] R More, R Kottath, R Jegadeeshwaran, V Kumar, V Karar, S Poddar,”Improved pose estimation by inlier refinement for visual odometry” , Sensing, Signal Processing and Security (ICSSS),1726-3291
[103] P. S. Anoop and V. Sugumaran ,”Classifying Machine Learning Features Extracted from Vibration Signal with Logistic Model Tree to Monitor Automobile Tyre Pressure ” , SDHM,19302991, 19302983
[104] Rahul Kumar Sharma, V. Sugumaran, Hemantha Kumar , Amarnath M, “Condition Monitoring of Roller Bearing by K-Star Classifier and K-Nearest Neighborhood Classifier Using Sound Signal” , SDHM,19302991, 19302983
A. Joshuva and V. Sugumaran, “A Comparative Study of Bayes Classifiers for Blade Fault Diagnosis in Wind Turbines through Vibration Signals ” , SDHM,19302991, 19302983
[105] Sam Baskar, R. Pratibha Nalini,”Spectroscopic Ellipsometry As A Non-Destructive Tool For Rapid Investigation of SI Rich SIC Thin Films” , International Journal of Mechanical Engineering and Technology,0976 – 6340
[106] Ram Kishore Sankaralingam and T. Venugopal,”Current trends on combustion control methods using fuel reactivities” , International Journal of Automotive and Mechanical Engineering (IJAME),ISSN: 2229-8649 (Print); ISSN: 2180-1606
[107] Dhanush Dineshan, Akhif Rasheed P E, Mihir Kulkarni, T. Venugopal,”INVESTIGATION ON SWIRL MOTION OF CI ENGINES THROUGH INTAKE VALVE CONFIGURATIONS” , International Journal of Mechanical Engineering and Technology (IJMET),ISSN Print: 0976-6340 and ISSN Online: 0976-6359
[108] P.Tamilselvan & Gangeya Srinivasu Goteti,”HCCI Combustion in a Diesel Engine Using Oxygenated Fuels and Various Operating Parameters – A Review” , International Journal of Renewable Energy Research..,1309-0127
[109] S. Mallikarjuna Reddy, V. Sandeep, M. Sreekanth, Joseph Daniel,”Development and Testing of a Solar Cooker with Thermal Energy Storage System” , INTERNATIONAL ENERGY JOURNAL,2165-2538
[110] Karunamurthy Krishnasamy*, Manimaran Renganathan,”Effect of Lower Convective Zone Thickness and Swirl Flow on the Performance of a Salinity Gradient Solar Pond” , CHEMICAL ENGINEERING TRANSACTIONS,ISBN 978-88-95608- 60-0; ISSN 2283-9216
[111] M. Umashankar and K. Annamalai,”Damping properties of nickel-added modified zinc alloys” , Journal of Mechanical Engineering and Sciences,2289-4659
[112] S. Balaguru, Vela Murali, and P. Chellapandi,”Effects of Different Operating Temperatures on the Tensile Properties of the Grid Plate Hardfaced with Colmonoy in a Pool Type Sodium Fast Reactor” , Science and Technology of Nuclear Installations,1687-6083
[113] Kale Ajinkya Pravin and Deivanathan R,”Intelligent Path Tracking Autonomous Robot using Ultrasonic sensors and Magnetometer” , Advances in Computational Research,09753273 & 09759085
[114] R. Dinesh Babu, P. Prakash, D. Devaprakasam,”Review on Emerging Applications of Nanobiomaterials in Dentistry and Orthopaedics” , Trends Biomater. Artif. Organs, 31(4), 155-162 (2017),9711198
[115] Rohit Chaudhari* , Vrushabh Sawant, Davidson Jebaseelan # , Sreekanth Dondapati,”Fluid Structure Interaction Study of Thermal Spray Coating on a Titanium Alloy” , Trends Biomater. Artif. Organs,ISSN 0971-1198
[116] M. Sasikumar, R. Balaji,”A Comparative Evaluation of Mechanical and Ablative Properties of Ceramic/Phenolic Composites filled with different fillers” , Journal of Materials and Environmental Science,2028-2508
[117] Radha, R., Sreekanth D,”Insight of magnesium alloys and composites for orthopedic implant applications – a review” , Journal of Magnesium and Alloys, 2213-9567
[118] Gobinath, V.M., Annamalai, K.,”Effect of Inoculation in Chilled Cast Iron with Different Chill”” , Materials Today: Proceedings, 2214-7853
[119] Giridharan, A., Samuel, G.L.,”Investigation into erosion rate of AISI 4340 steel during wire electrical discharge turning process” , Machining Science and Technology,1532-2483
[120] Alamelu Manghai T.M., Jegadeeshwaran R., Sugumaran V.”Brake fault diagnosis through machine learning approaches – A review” , SDHM Structural Durability and Health Monitoring,1930-2983
[121] Karthick, E., Mathai, J., Michael Tony, J., Marikkannan, S.K.,”Processing, Microstructure and Mechanical Properties of Al2O3and SiC Reinforced Magnesium Metal Matrix Hybrid Composites” , Materials Today: Proceedings, 2214-7853
[122] Singh M., Natrayan L., Senthil Kumar M.,”An experimental investigation on mechanical behaviour of siCp reinforced Al 6061 MMC using squeeze casting process” , International Journal of Mechanical and Production Engineering Research and Development,2249-8001
[123] Joshuva A., Sugumaran V.,”A comparative study of Bayes classifiers for blade fault diagnosis in wind turbines through vibration signals” , SDHM Structural Durability and Health Monitoring,1930-2983

2015

  1. Senthil Kumar M, Elayaperumal, A, Vijayaram, TR & Senguttuvan, G, “Processing and Characterization of Pure Cordierite and Zirconia doped Cordierite ceramic composite by precipitation technique” Bulletin of Materials Science, Springer, 679-688, 38(3), 2015.
  2. Undavalli Bhargava Sai Charan & Senthil Kumar M, “Deposition and Characterization of Zns Thin Films on Silicon Substrate by Thermal Evaporation”, International Journal of Applied Engineering Research, 606-609, 10(50), 2015.
  3.  Vijayaram TR, Senthil Kumar M, & Karthikeyan CP, “Emphasis of Investment casting Technologies in Foundries”, Indian Foundry Journal”, 19-25, 61(5), 2015.
  4. Vijayaram TR, Karthikeyan CP, & Senthil Kumar M, “Non Destructive Testing of Castings in Foundries”, International Journal of Production Engineering”, 35-44, 1(1), 2015.
  5. Sushant S Patil, Annamalai. K & Senthil kumar. M, “Prediction of Crack Propagation in Double Cantilever Beam of Carbon Fiber Epoxy Composite”, International Journal of Applied Engineering Research, 10246-10249, 10(11), 2015.
  6. Senthil Kumar M, Elayaperumal, A, & Vijayaram, “Synthesis, Characterization and Sintering Behaviour Influencing Mechanical, Thermal and Physical Properties of Pure Cordierite and Cordierite-CeO2”, Journal of Advanced Ceramics, Springer, 22-30, 4(1), 2015.
  7. Sasikumar.M, Balaji.R, “Mechanical, ablative, and thermal properties of cenosphere‐filled ceramic/phenolic composites” Polymer Composites, Online version, Sage Publications, 2015.
  8. Sasikumar M, Balaji R, Elayaperumal A “Thermal, Thermo oxidative and Ablative behavior of cenosphere filled ceramic/phenolic composites” Polymer degradation and stability, 125-132, 114, 2015.
  9. Giridharan. A and G. L. Samuel (2015), “Modeling and Analysis of Crater Formation during Wire Electrical Discharge Turning (WEDT) Process”, International Journal of Advanced Manufacturing Technology, 77, 1229–1247.
  10.  R. Jegadeeshwaran, V. Indira and V. Sugumaran, Determination of minimum sample size for fault diagnosis of automobile hydraulic brake system using Power Analysis, Engineering Science and Technology: an International Journal, 18 (1), 59-69, 2015.
  11.  Akhil Muralidharan, V. Sugumaran, K.P. Soman, Bearing fault diagnosis using vibration signals by variational mode decomposition and Naïve Bayes classifier, International Journal of Automation, Issue 1, Vol. 1, 1-14, 2015.
  12.  R. Jegadeeshwaran, V. Sugumaran, A Comparative study of Naïve Bayes Classifier and Bayes net Classifier for fault diagnosis of Automobile hydraulic brake system, International Journal of Decision support systems, Vol. 1, Issue 1, 2015.
  13.  M. Amarnath, Deepak Jain, V. Sugumaran, R. Hemantha Kumar, Fault Diagnosis of Helical Gear Box Using Naïve Bayes And Bayes Net, International Journal of Decision Support Systems, Vol. 1, Issue 1, PP. 4-17, 2015 Inderscience publisher.
  14.  V. Muralidharan, N.R. Sakthivel and V.Sugumaran, Fault Diagnosis of Monoblock Centrifugal Pump Using Stationary Wavelet Features and Bayes Algorithm, Asian Journal of Science and Applied Technology, Vol.3, Issue. 3, pp. 1-4, 2015.
  15.  R. Jegadeeshwaran V. Sugumaran and K. P. Soman, Vibration Based Fault Diagnosis Of A Hydraulic Brake System Using Variational Mode Decomposition (VMD), SDHM: Structural Durability & Health Monitoring, accepted for publication on 18.2.2015.
  16. Shalet K S, Jegadeeshwaran R, Sugumaran V, Elangovan M; Condition Monitoring of Single Point Cutting Tool Using ARMA Features And SVM Classifiers, International Journal of Applied Engineering Research, (IJAER), 2015.
  17. Akhil Muralidharan, V. Sugumaran, K.P Soman, M. Amarnath, Fault Diagnosis Of Helical Gear Box Using Variational Mode Decomposition And Random Forest Algorithm, SDHM: Structural Durability & Health Monitoring, Accepted on 19.03.2015.
  18.  Ragul Kumar Sharma, V Sugumaran, H Kumar, M Amarnath, A comparative study of naive Bayes classifier and Bayes net classifier for fault diagnosis of roller bearing using sound signal, International Journal of Decision Support Systems 1 (1), 115-129, 2015.
  19.  Aditya V Rao, V. Sugumaran, K. I. Ramachandran, A Comprehensive Study of Fault Diagnostics of Roller Bearings Using Continuous Wavelet Transform, International Journal of Manufacturing System and Design 1 (1), 1-20, 2015.
  20.  V.Sugumaran, M. Elangovan, N.R.Sakthivel, S.Saravanamurugan, Binoy.B.Nair, Machine Learning Approach to the Prediction of Surface Roughness using Statistical Features of Vibration Signal Acquired in Turning, Procedia Computer Science 50, 282-288, Elsevier, 2015.
  21.  V.Sugumaran, R. Jegadeeshwaran, Health Monitoring of a Hydraulic Brake System Using Nested Dichotomy Classifier – A Machine Learning approach, International Journal of Prognostics and Health Management 6 (1(014)), 10, 2015.
  22.  V.Sugumaran, R. Jegadeeshwaran, A comparative study of navie Bayes classifier and Bayes net classifier for fault diagnosis of Automobile Hydraulic brake system, Internation Journal of Decision Support System 1 (3), 247-267, 2015.
  23.  V.Sugumaran, R. Jegadeeshwaran, Fault diagnosis of automobile hydraulic brake system using statistical features and support vector machines, Mechanical Systems and Signal Processing 52, 436-446, 2015, Elsevier.
  24.  V Sugumaran, Aditya V Rao, KI Ramachandran, A Comprehensive Study of Fault Diagnostics of Roller Bearings Using Continuous Wavelet Transform, International Journal of Manufacturing Systems and Design 1 (1), 27-46, 2015.
  25.  V.Sugumaran, R. Jegadeeshwaran, Fuzzy classifier with automatic rule generation for fault diagnosis of hydraulic brake system using statistical features, International Journal of Fuzzy Computation and Modelling 1 (3), 333-350, 2015.
  26.  V Sugumaran, V. Sabarinathan, K. Rajesh Khanna, V. J. Sarath Kumar, A Comparative Study on Naïve Bayes and Bayes Net Classifiers for the Heart Disease Prediction System, International Journal of Mechanical Handling and Automation 1 (1), 1-7, 2015.
  27.  Hemanth Mithun Praveen, V. Sugumaran, Harvesting Vertical Vibration Of Automotive Tyre To Monitor Tyre Pressure Using Applied Machine Learning Technique, International Journal of Applied Engineering Research (IJAER), Accepted for publication on 30 June 2015.
  28.  Sathish kumar V Sugumaran; remaining life time prediction of bearings through classification using decision tree algorithm , International Journal Of Applied Engineering Research (IJAER) Vol.10, 2015 rip
  29.  V. Sugumaran and A. Joshuva; speech recognition for humanoid robot, International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp.57-60 2015 rip scopus indexed
  30.  Rajesh kanna. K Sabarinathan. V Sarath kumar. V. J and Sugumaran. V; eye state prediction using eeg signal and c4.5 decision tree algorithm, International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp.167-171 2015 rip scopus indexed
  31.  V. Sugumaran and A. Arjun; human tracking system, International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp. 181-184 2015 rip scopus indexed
  32.  V. Sugumaran V. Vipin; gesture recognition system for dynamic user interface , International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp.185-190 2015 scopus indexed
  33.  B. Rebecca jeya vadhanam S. Mohan and V. Sugumaran; classification of advertisement and non-advertisement videos with bicc features using csca algorithm , International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp.191-196 2015 rip scopus indexed
  34.  A. Ramu, V. Sugumaran and M. Amarnath; fault diagnosis of gear using histogram features of vibration signals and classifier ensemble, International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp.234-238 2015 rip scopus indexed
  35.  V. Sugumaran A. Ramu.; fabrication and actuation of humanoid robot hand, International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp.318-321 2015 rip scopus indexed
  36.  V. Sugumaran and R. Jegadeeshwaran; a comparative study of tree family classifiers for fault diagnosis of an automobile hydraulic brake system using statistical features, International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp.322-327 2015 rip scopus indexed
  37.  K. Balachandar, V. Sugumaran, R. Jegadeeshwaran and M.Amarnath; fault diagnosis of bearing using sound signals through histogram features and decision tree, International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp.476-481 2015 rip scopus indexed
  38.  Joshuva, V. Sugumaran and M. Amarnath; Selecting Kernel Function Of Support Vector Machine For Fault Diagnosis Of Roller Bearings Using Sound Signals Through Histogram Features, International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68 pp.482-487 2015, scopus indexed
  39.  Jegadeeshwaran, R; Sugumaran, V; Fault diagnosis of automobile hydraulic brake system using statistical features and support vector machines, Mechanical Systems and Signal Processing, Vol. 52-53, 2015
  40.  S.Sivarajan R.Padmanabhan, SURFACE ENGINEERED COATINGS FOR AUTOMOTIVE INDUSTRIES(2015) Journal of Chemical and Pharmaceutical Sciences. ISSN: 0974-2115, JCHPS Special Issue 7: 2015
  41.  Sushant Chougle, VG Sridhar & Senthil Kumar M, “Friction Stir Welding of Dissimilar Materials of Aluminium (1100) Alloy to Brass”, International Conference On Technological Convergence For Information, Health, Food and Energy Security, 1-2 May 2015.

2014

  1. Rakesh K. Rajan, Hemant Kumar, S.K. Albert, T.R. Vijayaram, Sliding friction and wear characteristics of grade 410 martensitic stainless steel, Applied Mechanics and Materials Vols. 592-594 (2014) pp 1346-1351,Trans Tech Publications,Switzerland, 2014
  2. Saleel Ismail and P S Mehta (2014). A Phenomenological Model for Predicting Entropy Generation during Vaporization of Droplets in Engine Fuel Sprays. Applied Mechanics and Materials, vols. 592-594, pp 1403-1407.
  3. Parag J Tarwadi and ArockiaSelvakumar A (2014). Vision Based Pick and Place Robot for Sorting objects Using MATLAB. Applied Mechanics and Materials, vol.no.592-594, pp 2314-2318.
  4. Vinay Varghese, K. Annamalai, and K. Santhosh Kumar (2014). Optimisation of machining parameters for high feed end milling on INCONEL 718 Super alloy. Applied Mechanics and Materials, Vols. 592-594, pp 584-590.
  5. EaswaraPillai Raj Kumar and KrishnamoorthiAnnamalai (2014). Investigation into optimal fixturing cost of an assembly using genetic algorithm. Engineering Review, Vol. 34, No. 2, pp.85-91.
  6. Govinda A and Annamalai.K (2014). Design and Analysis of Arc spring used in dual mass flywheel. International Journal of Engineering and Technology Research, Vol.2, Issue.1.
  7. WankhadeNiteshPrakash, V. G. Sridhar and K. Annamalai (2014). New product development by DFMA and Rapid prototyping. ARPN Journal of Engineering and Applied Sciences, Vol. 9, No. 3, pp. 274-279.
  8. G.Sakthivel, M.Ilangkumaran, G.Nagarajan and AdityaBajiroGaikwad (2014). Comparative analysis of performance, emission and combustion parameters of diesel engine fuelled with ethyl ester of fish oil and its diesel blends. Fuel, Vol. 132, pp 116-124.
  9. ShridharKullolli, G.Sakthivel and M.Ilangkumaran (2014). A neural network model for the prediction of CI engine performance at different injection timings. International Journal of Ambient Energy, DOI;10.1080/01430750.2014.931297.
  10. D.DavidsonJebaseelan,C. Jebaraj,N. Yoganandan, S. Rajasekaran, and J. Yerramshetty (2014). Biomechanical responses due to discitis infection of a juvenile thoracolumbar spine using finite element modeling. Med EngPhys,Volume 36, Issue 7, pp 938–943.
  11. WankhadeNiteshPrakash, V. G. Sridhar and K. Annamalai (2014). New product development by dfma and rapid prototyping. ARPN Journal of Engineering and Applied Sciences, VOL. 9, NO. 3, pp 274-279.
  12. Parag J Tarwadi and ArockiaSelvakumar A (2014). Based Pick and Place Robot for Sorting objects Using MATLAB. Vision. Applied Mechanics and Materials, 592-594, 2314-2318.
  13. G.Sakthivel, M.Ilangkumaran, and G.Nagarajan (2014). Multi-criteria decision modeling approach for biodiesel blend selection based on GRA-TOPSIS analysis. International Journal of Ambient Energy, vol.35, pp.139-154.
  14. G.Sakthivel, M.Ilangkumaran, G.Nagarajan, AdityaBajiroGaikwad (2014). Comparative analysis of performance, emission and combustion parameters of diesel engine fuelled with ethyl ester of fish oil and its diesel blends. Fuel, vol. 132, pp: 116-124.
  15. ShridharKullolli, G.Sakthivel and M.Ilangkumaran (2014). A neural network model for the prediction of CI engine performance at different injection timings. International Journal of Ambient Energy,DOI;10.1080/01430750.2014.931297.
  16. C.N.Jayapragasan, M.SaiPhani Deep Kumar and K.Janardhan Reddy (2014). Redesign and Validation of an Industrial Blower. International Journal of Innovative Research in Science, Engineering and Technology, 3, 13999.
  17. Renganathan, M and Rajagopal T (2014). Computational Study of HCCI-DI Combustion at Preheated and Supercharged Inlet Air Conditions. SAE Technical Paper 2014-01-1108, DOI: 10.4271/2014-01-1108.
  18. Manimaran R. and ThundilKaruppa Raj R (2014). Comparative Evaluation of Re-entrant and Flat Toroidal Combustion Chambers in a Direct Injection Diesel Engine using Computational Fluid Dynamics. Computational Thermal Sciences, 6 (2), 171–190,DOI: 10.1615 /ComputThermalScien.2014010594.
  19. Manimaran R. and ThundilKaruppa Raj R (2014). Computational Studies of Swirl Ratio and Injection Timing on Atomization in a Direct Injection Diesel Engine. Frontiers in Heat and Mass Transfer (FHMT), 5 – 2, doi: 10.5098/hmt.5.2.
  20. PA Ramakrishna, M Ramakrishna and R Manimaran (2014). Experimental Investigation of Temperature Separation in a Counter-Flow Vortex Tube. Journal of Heat Transfer vol.136 (8), pp:082801.
  21. LokavarapuBhaskaraRao and ChellapillaKameswaraRao (2014). Analysis of annular plates with inner and outer edges elastically restrained and resting on Winkler foundation. Frequency. International Journal of Mechanical Sciences, vol. 81(4), pp:184-194.
  22. LokavarapuBhaskaraRao and ChellapillaKameswaraRao (2014). Frequencies of circular plate with concentric ring and elastic edge support. Frontiers of Mechanical Engineering, vol.9 (2), pp: 168-176.
  23. LokavarapuBhaskaraRao and ChellapillaKameswaraRao (2014). Buckling of circular plate with foundation and elastic edge. International Journal of Mechanics and Materials in Design,10(2), [DOI 10.1007/s10999-014-9261-2].
  24. S.Sivarajan and R.Padmanabhan (2014). Tribological performance of environment friendly surface modified die in deep drawing. Arpn journal of engineering and applied sciences. vol 9 (5 ), issn 1819-6608.
  25. TadisettiPremsai, AngaKiranVikramVarma and S.Sivarajan (2014). Failure analysis of rollers in mill stands using failure mode effect analysis. International journal of engineering sciences & research technology, volume 3(7) pp:151.
  26. Saleel Ismail and P. S. Mehta (2014). A phenomenological model for predicting entropy generation during vaporization of droplets in engine fuel sprays. Applied Mechanics and Materials, 592-594, 1403-1407.
  27. MogrekarAshish and Sivakumar R (2014). CFD analysis of Micro ramps for hypersonic flows. Applied Mechanics and Materials, vol. 592-594, 1962-1966.
  28. Jafferson.JM, Hariharan. P and Ramkumar.J (2014). Effects of ultrasonic vibration and magnetic field in micro-EDM milling of non magnetic material. Materials and Manufacturing Processes, vol.29, pp.357-363.
  29. AbhinavAggarwalSugumaran, M. Amarnath and Hemantha Kumar (2014). Fault Diagnosis of Helical Gear Box using Logistic Function and REP Tree. International Journal of Research in Mechanical Engineering Vol.2, Issue-1, pp: 26-32.
  30. Hemantha Kumar, T. A. Ranjit Kumar, M. Amarnath, V. Sugumaran (2014). Fault diagnosis of bearings through vibration signal using Bayes classifiers. Int. J. Computer Aided Engineering and Technology, Vol. 6(1).
  31. SanidhyaPainuli , M. Elangovan and V. Sugumaran (2014). Tool condition monitoring using K-star algorithm. Expert Systems with Applications , Vol. 41 , pp: 2638–2643.
  32. AbhishekSharma V. Sugumaranand S. BabuDevasenapati (2014). Misfire detection in an IC engine using vibration signal and decision tree algorithms. Measurement,Volume 50 ,pp 370–380.
  33. AjithGopinath, Senthil Kumar M and ElayaPerumal A (2014). Experimental Investigation on Mechanical Properties of Natural Fiber Reinforced Composite with Polyester and Epoxy Resin. Journal of Procedia Engineering.
  34. Sasikumar M, Balaji R, “A study on the effect of cenosphere on thermal and ablative behavior of cenosphere loaded ceramic/phenolic composites” Polymer, 6634-6639, 55(25), 2014.
  35. Sasikumar M, Siddarthan K S, “Mechanical and Thermal properties of Glass/ Polyester Composite with Glycerol as additive” International Journal of Engineering trends and Technology, 61-64, 7(2), 2014.
  36.  V.Anand Rao, R.Deivanathan, “Experimental Investigations for Welding Aspects of Stainless Steel 310 for the Process of TIG Weldinng”, Proceedia Engineerinng, V97, 2014, pp902-908.(citation:1)
  37.  Sushant Sukumaran, R,Deivanathan, “Optimum linkage for biped mechanism”, Proceedia Engineering, V97, 2014, pp1322-1331.
  38.  Hemantha Kumar, M. Amarnath and V. Sugumaran; Fault Diagnosis of Helical Gear Box using Large Margin K-Nearest Neighbors Classifier using Sound Signals, Journal of Vibration Engineering and Technologies, 2014.
  39.  R. Jegadeeshwaran and V.Sugumaran,; Condition Monitoring of a Hydraulic Brake System Using Sequential Minimal Optimization (SMO) Algorithm, International Journal of Engineering Research & Management, 2014.
  40.  R. Jegadeeshwaran, V. Sugumaran, Brake Fault Diagnosis using Clonal Selection Classification Algorithm (CSCA) – A Statistical Learning Approach, Engineering Science and Technology, an International Journal.
  41.  R. Jegadeeshwaran, V. Sugumaran, Vibration based fault diagnosis study of an automobile Brake system using k star (k*) algorithm – a statistical approach, Recent patents in signal processing, accepted for publication.
  42.  V. Muralidharan, V. Sugumaran, V. Indira; Fault Diagnosis of Monoblock Centrifugal pump using SVM, Engineering Science and Technology: an International Journal, 1, 1, 2014, Elsevier.
  43.  N. Gangadhar, Hemantha Kumar, S. Narendranath, V. Sugumaran, Fault Diagnosis of Single Point Cutting Tool through Vibration Signal Using Decision Tree Algorithm, Procedia Materials Science, Volume 5, 2014, Pages 1434–1441.
  44.  A. Kannan, V. Sugumaran, Amarnath, K.P. Soman, Fault diagnosis of helical gear box using variational mode decomposition with naïve Bayes and Bayes net classifiers through vibration signals, International Journal of Manufacturing Systems and Design, Accepted on 30.10.14.
  45.  V. Sabarinathan and V. Sugumaran, Diagnosis of Heart disease using Decision Tree, International Journal of Research in Computer applications and Information Technology, Vol. 2, Issue 6, PP. 74-49, IASTER.
  46.  S.Sivarajan,R.Padmanabhan, Green Machining and Forming by the use of Surface coated tools(2014) Procedia Engineering 97 ( 2014 ) 15 – 21.
  47.  Rohit Kaushik, Shubham Gupta, Sivarajan S Surface Modification of Mild Steel with Molybdenum Disulfide by Tungsten Inert Gas International Review of Mechanical Engineering (I.RE.M.E.), Vol. 8, N. 6 ISSN 1970 – 8734 November 2014.

2013

  1. ThoguluvaRaghavanVijayaram, Triz methodology in sand casting process Part 1, Metal world international magazine, (Journal ISO 9001: 2008 certified), Mumbai, India, Volume 13, Number 07, pp: 29-33, July 2013
  2. ThoguluvaRaghavanVijayaram, Triz methodology in sand casting process Part 2, Metal world international magazine, (Journal ISO 9001: 2008 certified), Mumbai, India, Volume 13, Number 08, pp: 31-34, August 2013
  3. ThoguluvaRaghavanVijayaram, Quality control engineering in foundries, Metal world international magazine, (Journal ISO 9001: 2008 certified), Mumbai, India, Volume 13, Number 09, pp: 18-27, September 2013
  4. ThoguluvaRaghavanVijayaram and AjithGopinath, Heat treatment of EN-8 steel casting samples, Metal world international magazine, (Journal ISO 9001: 2008 certified), Mumbai, India, Volume 12, Number 10, pp: 34-37, October 2013
  5. T.R.Vijayaram and O.S.Sandeep, Effect of heat treatment of cast EN–9 steel with different quenchants, Foundry Review Magazine, MMR established 1948, BrajBinani Group, Asian Industry and Information Services Pvt. Ltd., Mumbai 400011, India, Techno track, Volume 1, Issue 15, page: 2-3, November 2013
  6. T.R.Vijayaram and R.Kasilingam, Semisolid processing of metal matrix composite castings, Metal world international magazine, (Journal ISO 9001: 2008 certified), Mumbai, India, Volume 14, Number 11, pp: 34-38, November 2013
  7. E.Rajkumarand K.Annamalai (2013). An Investigation on Computer Aided Fixture Design and Analysis using FEM Approach. European Journal of Scientific Research, Vol. 107 No 2.
  8. N. Suprith, K.Annamalai, C.D. Naiju, and ArjunMahadevan (2013). Design and Analysis of Automotive Multi-leaf spring using Composite materials. Applied Mechanics and Materials Vol. 372, pp 533-537.
  9. Gaurav S. Harane and K.Annamalai (2013). Design and Optimization of Pile Tip for offshore Drilling Rig Foundation. International Journal of Research in Mechanical Engineering, Vol. 1, Issue 2, pp. 39-44.
  10. G.Sakthivel, and M.Ilangkumaran (2013). Development of decision support system to select the best fuel blend in IC engines to enhance the energy efficiency. International Journal of Energy Technology and Policy, Vol.9, no.3-4, pp 310 -343.
  11. M.Ilangkumaran and G.Sakthivel (2013). Development of fuzzy logic model to predict the engine performance of fish oil biodiesel with diethyl ether. International Journal of Ambient Energy, DOI– 10.1080/01430750.2013.829786
  12. G.Sakthivel, M.Ilangkumaran, G.Nagarajan, A.Raja, P.M.Ragunadan and J.Prakash(2013). A hybrid MCDM approach for evaluating an automobile purchase model.International journal of Information and Decision Sciences. Vol 5, c50-85.
  13. G.Sakthivel, M.Ilangkumaran, G.Nagarajan, P.Shanmugam and J.Prakash (2013). Effect of fuel additives on performance and exhaust emissions of direct injection diesel engine operating on B20 waste fish oil. International Journal of Oil, Coal and Gas Technology, Vol6,Vol: 462 – 476.
  14. G.Sakthivel, M.Ilangkumaran, and G.Nagarajan (2013). A Hybrid Multi-Criteria Decision Support System for Selection of Optimum Fuel Blend. International journal of Exergy, Vol. 12, PP 463 – 490.
  15. G.Sakthivel, M.Ilangkumaran and G.Nagarajan (2013). Selection of best biodiesel blend for IC engines: An integrated approach with FAHP -TOPSIS and FAHP-VIKORInternational Journal of Oil, Gas and Coal Technology, Vol6, PP: 518 – 612.
  16. G.Sakthivel, and M.Ilangkumaran (2013). Development of decision support system to select the best fuel blend in IC engines to enhance the energy efficiency. International Journal of Energy Technology and Policy, vol 9, pp:310 – 343.
  17. G.Sakthivel, G.Nagarajan, and M.Ilangkumaran (2013). Predicting the Engine Performance Using Ethyl Ester of Fish Oil with the aid of Artificial Neural Network. International Journal of Ambient Energy, vol 34, pp: 145-158.
  18. G.Sakthivel, M.Ilangkumaran, and G.Nagarajan (2013). Experimental investigations of the performance, emission and combustion characteristics of a biodiesel (ethyl ester of fish oil) fuelled direct-injection diesel engine. International Journal of Vehicle Performance, vol 1, pp:137-156.
  19. M.Ilangkumaran, G.Sakthivel, V.Sasirekha and L.Anojkumar (2013). Optimization of wastewater treatment technology selection using hybrid MCDM. International Journal of Management of Environmental Quality, vol 24, PP:619 – 641.
  20. G.Sakthivel and M.Ilangkumaran (2013). Development of fuzzy logic model to predict the engine performance of fish oil biodiesel with diethyl ether. International Journal of Ambient Energy –10.1080/01430750.2013.829786.
  21. Donnell James and K. Janardhan Reddy (2013). Conceptual Product Development of Punch cum Stapler. International Journal of Research in Mechanical Engineering, 1, 1, 76
  22. PremanReynold Joseph T and K. Janardhan Reddy (2013). Study of Quality Function Deployment Tool in a New Product Development-Carding Machine. International Journal of Research in Mechanical Engineering, 1, 1,117.
  23. Sumedh J. Suryawanshi and K. Janardhan Reddy (2013). Conceptual Product Development of Wheelchair for People Disabled in Legs. International Journal of Research in Mechanical Engineering, 1, 2, 1.
  24. Manimaran R. and ThundilKaruppa Raj R (2013). CFD Analysis of Combustion and Pollutant Formation Phenomena in a Direct Injection Diesel Engine at different EGR Conditions. Procedia Engineering, vol. 64, pp: 497 – 506, doi:10.1016/j.proeng.2013.09.124.
  25. Manimaran R. and ThundilKaruppa Raj R (2013). Numerical Investigations of Spray Droplet Parameters in a Direct Injection Diesel Engine using 3-Z Extended Coherent Flame Model. Advanced, Materials Research, 768,226-230, doi: 10.4028/www.scientific.net/AMR.768.226.
  26. Manimaran R. and ThundilKaruppa Raj R (2013). Numerical Investigations on Combustion and Emission Characteristics in a Direct Injection Diesel Engine at Elevated Fuel Temperatures. Frontiers in Heat and Mass Transfer (FHMT), 4, 013008, DOI: 10.5098/hmt.v4.1.3008.
  27. R. Manimaran, and R. ThundilKaruppa Raj, K. Senthilkumar (2013). Premixed Charge Compression Ignition in Direct Injection Diesel Engine using Computational Fluid Dynamics. WSEAS Transactions on Heat and Mass Transfer, vol 8(1), pp: 16-24.
  28. Bhaskara Rao. L and Kameswara Rao. C (2013). Vibrations of elastically restrained circular plates resting on Winkler foundation. Arabian Journal for Science and Engineering, vol 38 (11), pp: 3171-3180.
  29. BhaskaraRao. L and KameswaraRao. C (2013). Frequencies of circular plates weakened along an internal concentric circle and elastically restrained edge against translation. Journal of Applied Mechanics Transactions of the ASME, 2013, Vol. 80/011005-1.
  30. BhaskaraRao. L and KameswaraRao. C (2013). Buckling of Annular Plates with Elastically Restrained External and Internal Edges. Mechanics Based Design of Structures and Machines, vol. 41 (2), pp: 222-235.
  31. BhaskaraRao. L and KameswaraRao. C (2013). Fundamental buckling of circular plates with elastically restrained edges and resting on concentric rigid ring support.Frontiers of Mechanical Engineering, vol. 8(3), pp: 291-297.
  32. Kiranverghese ,Rakesh K Rajan, Sivarajan S (2014). Optimisation of cutting parameters using taguchi method in composite materials. International journal of scientific and engineering research (ISJER), volume 4(10) pp: 2229-5518.
  33. Jafferson.JM, Hariharan. P (2013). Machining performance of cryogenically treated electrodes in micro electric discharge machining: A comparative experimental study. Materials and Manufacturing Processes, vol. 28, pp.397-402.
  34. Jafferson.JM and Hariharan. P (2013). Investigation on the quality of micro holes machined by µEDM using image processing. Materials and Manufacturing Processes, vol.28, pp. 1356-1360.
  35. Senthil Kumar, M and Elayaperumal A (2013). Synthesis, Characterization and Sintering Behaviour Influencing Mechanical, Thermal and Physical Properties of Cordierite doped TiO2. International Journal of Materials Research and Technology, vol. 2(3). pp: 269-275.
  36. Balamuruga Mohan Raj G and V. Sugumaran (2013). Regression and Least Median Square Analysis to Predict the Surface Roughness in Boring Operation. IJLSC 5(1), pp: 1-7.
  37. V. Sugumaran, Deepak jain, M. Amarnathand Hemanthkumar (2013). Fault diagnosis of Helical gear Box Using Decision Tree Through Vibration Signals. International Journal of Performability Engineering Vol. 9, No. 2, pp. 195- 208.
  38. R. Jegadeeshwaran and V. Sugumaran (2013). Comparative study of decision tree classifier and best first tree classifier for fault diagnosis of automobile hydraulic brake system using statistical features. Measurement , Volume 46, pp 3247–3260.
  39. R.Jegadeeshwaran and V. Sugumaran (2013). Method and Apparatus for Fault Diagnosis of Automobile Brake System Using Vibration Signals. Recent Patents on Signal Processing, Volume3, pp2-11.
  40. Balamuruga Mohan Raj. G, Sugumaran. V (2013). Developing Gaussian Process Model to Predict theSurface Roughness in Boring Operation. International Journal of Engineering Trends and Technology– Vol.4 Issue. 3.
  41. Abhishek Sharma, V. Sugumaran, S. BabuDevasenapati (2013). Misfire Detection in an IC Engine Using Vibration Signal and Bagging Classifier. International Journal of Engineering Innovation & Research Vol. 2, Issue 4.
  42. V. Muralidharan and V. Sugumaran (2013). Selection of discrete wavelets for fault diagnosis of Monoblock centrifugal pump using the j48 algorithm. Applied Artificial Intelligence, DOI:10.1080/08839514.2012.721694.
  43. M. Amarnath, Deepak Jain, V. Sugumaran and Hemantha Kumar (2013). Fault diagnosis of helical gear box using naïve Bayesand Bayes net. Int. J. Decision Support Systems.
  44. V. Muralidharanand V. Sugumaran(2013). Feature extraction using wavelets and classification through decision tree algorithm for fault diagnosis of mono-block centrifugal pump. Measurement , Volume 46, pp 353–359.
  45. M. Amarnath, V. Sugumaran, Hemanthakumar (2013). Exploiting sound signals for fault diagnosis of bearings using decision tree. Measurement , Volume 46, pp 1250–1256.
  46. Kale AjinkyaPravin, Prof. R. Jegadeeshwaran, Dr.V. Sugumaran(2013). Roller Bearing Fault Diagnosis by Decision Tree Algorithms with Statistical Feature. International Journal of Research in Mechanical Engineering. Vol. 1, Issue 1, pp. 01-09.
  47. V. V.Ramalingam, S. Mohan, V. Sugumaran (2013). A Comparison of EMG and EEG Signalsfor Prostheses Control using Decision Tree. International Journal of Research in Computer Applications & Information Technology Volume 1, Issue 1,pp. 01-08.
  48. M. Amarnath, Deepak JainV. Sugumaran and Hemantha Kumar (2013). Fault Diagnosis of Helical Gear Box Using Decision Tree and Best-First Tree. International Journal of Research in Mechanical Engineering. Vol. 1, Issue 1, pp. 22-33.
  49. AnishBahri, V.Sugumaran, S. BabuDevasenapati (2013). Misfire Detection in IC Engine using Kstar Algorithm. International Journal of Research in Mechanical Engineering.Volume 1, Issue 1, pp. 103-110.
  50. B. Rebecca JeyaVadhanam,S. Mohan,V. Sugumaran (2013). A Classification Performance on Multiple Frames of Advertisement and Non Advertisement Videosusing C4.5 Algorithm. International Journal of Research in Computer Applications & Information Technology Vol.1, Issue 2, pp: 01-07.
  51. SiddhantSahu, and V. Sugumaran (2013). Bayesian Sample Size Determination of Vibration Signals in Machine Learning Approach to Fault Diagnosis of Roller Bearings. International Journal of Research in Mechanical Engineering. Vol. 1, Issue 1, pp: 55-63.
  52. PiyushChaskar and V. Sugumaran (2013). Voice Command Wheelchair Navigation using K Star Classifier. International Journal of Research in Mechanical Engineering. Volume 1, Issue 2, pp. 73-79.
  53. Vedant, V. Sugumaran, M. Amarnath and Hemantha Kumar (2013). Fault Diagnosis of Helical Gear Box Using Sound Signal using Naïve Bayes and Bayes Net. International Journal of Engineering & Technology Research. Volume-1, Issue-1, pp. 98-105.
  54. V. Muralidharan and V. Sugumaran (2013). Fault diagnosis of centrifugal pump using wavelet features – fuzzy-based approach. Int. J. Computational Systems Engineering.
  55. Giridharan. A and G. L. Samuel (2013), “Investigation into Energy consumption, Surface roughness and Material Removal Rate of Cylindrical Components Machined using Wire Electrical Discharge Turning Process”, International Journal of Manufacturing Technology and Management, 27(4-6), 170-185.
  56. Senthil Kumar, M & Elayaperumal A, “Synthesis, Characterization and Sintering Behaviour Influencing Mechanical, Thermal and Physical Properties of Cordierite doped TiO2” International Journal of Materials Research and Technology, Elsevier, 269-275, 2(3), 2013.
  57.  Senthil Kumar M & Elayaperumal A, “Characterization of Cordierite And Cordierite – Zirconia Ceramic Composite Through Precipitation Technique” Proceedings in International Conference on Advances in materials processing and Characterization, 280 – 286, 6 – 8th February 2013.
  58. Jafferson J.M, Hariharan.P & Ram Kumar J, “Machining Performance of Cryogenically Treated Electrodes in Microelectric Discharge Machining: A Comparative Experimental Study”, Materials and Manufacturing Processes, ISSN 1042-6914 print 1532-2475 online
  59. Jafferson J.M & Hariharan. P, “Investigation of the Quality of Microholes Machined by µEDM Using Image Processing”, Materials and Manufacturing Processes,ISSN: 1042-6914 print 1532-2475 online

2012

  1. Saleel Ismail and P S Mehta (2012). Second-Law Analysis of Fuel-Air Mixing and Combustion Subprocesses in a Heterogeneous Charge Engine. Journal of Automobile Engineering, vol. 226, no. 6, pp 815–827.
  2. Dr. M. Ilangkumaran, Dr. G. Sakthivel , U. Syam Kumar, M. Vasudevan, S. Venkatesh& B. Viswanathan (2012). Development of fuzzy logic model to predict the engine performance of fish oil biodiesel with diethyl ether. International Journal of Ambient Energy, DOI: http://dx.doi.org/10.1080/01430750.2013.829786
  3. N.R. Sakthivel, Binoy.B.Nair, V. Sugumaran (2012). Soft computing approach to fault diagnosis of centrifugal pump. Applied Soft Computing, Volume 12 pp.1574–1581.
  4. N.R. Sakthivel V. Sugumaran, Binoy.B.Nair (2012). Automatic rule learning using rough set for fuzzy classifier in fault categorization of mono-block centrifugal pump. Applied Soft Computing, Volume 12 pp. 196–203.
  5. V. Indira, R.Vasanthakumari,V. Sugumaran (2012). Sample size determination for classification ofEEG signals using power analysis in machinelearning approach. IJARET, Volume 3, Issue 1, pp. 01-09
  6. V. Muralidharan, Hemanthakumar and V. Sugumaran (2012). Fault diagnosis of monoblock centrifugal pump using discrete wavelet features and J48 algorithm. IJMET, Volume 3, Issue 1, pp. 120-126.
  7. Manju B R, RajanA R, V. Sugumaran (2012). Optimizing the parameters of wavelets for pattern matching using GA. IJARET, Volume 3, Issue 1, pp. 77-85.
  8. V.V.Ramalingam, S.Ganeshkumar, V. Sugumaran (2012). Analysis of EEG signals using data mining approach. IJCET, Volume 3, Issue 1, pp. 206-212.
  9. V. Muralidharan and V.Sugumaran (2012). A comparative study of Naïve Bayes classifier and Bayes net classifier for fault diagnosis of monoblock centrifugal pump using wavelet analysis. Applied Soft Computing, Volume 12,pp 2023–2029.
  10. Hemantha Kumar, T. A. Ranjit Kumar, M. Amarnath, V. Sugumaran (2012). Fault diagnosis of antifriction bearings through sound signals using support vector machine. Journal of Vibro engineering, volume 14, issue 4.
  11. M.B.Shyam Kumar and S.Vengadesan (2012). Influence of rounded corners on flow interference due to square cylinders using immersed boundary method. ASME Journal of Fluids Engineering, Volume 134, Issue 9, Pages 091203(1–23).
  12. ThundilKaruppa Raj R. and Manimaran R (2012). Effect of Swirl in a Constant Speed DI Diesel Engine using Computational Fluid Dynamics. CFD Letters, 4(4), 2012 214-224.
  13. L. B. Rao and C. K. Rao (2012). Vibrations of circular plates with guided edge and resting on elastic foundation. Journal of Solid Mechanics, 4(3), 307-312.
  14. BhaskaraRao. L and KameswaraRao. C (2012). Free Vibration of Circular Plate with Elastic Edge Support and Resting on Elastic Foundation. International Journal of Acoustics and Vibration, 17 (4), 204-207.
  15. Saleel Ismail and P. S. Mehta (2012). Second-law analysis of fuel-air mixing and combustion subprocesses in a heterogeneous charge engine. Journal of Automobile Engineering, 226(6), 815–827.
  16. N.R. SakthivelBinoy. B.Nair and V. Sugumaran (2012). Soft computing approach to fault diagnosis of centrifugal pump. Applied Soft Computing,Volume 12 pp.1574–1581.
  17. N.R. Sakthivel, V. Sugumaran, Binoy.B.Nair (2012). Automatic rule learning using rough set for fuzzy classifier in fault categorization of mono-block centrifugal pump. Applied Soft Computing, Volume 12 pp. 196–203.
  18. V. Indira, R.Vasanthakumari and V. Sugumaran (2012). Sample Size Determination for Classification ofEEG Signals Using Power Analysis in MachineLearning Approach. IJARET, Volume 3, Issue 1, pp. 01-09.
  19. V. Muralidharan, Hemanthakumar and V. Sugumaran (2012). Fault Diagnosis of Monoblock Centrifugal Pump Using Discrete Wavelet Features and J48 Algorithm. IJMET, Volume 3, Issue 1, pp. 120-126.
  20. Manju B R ,Rajan A R, and V. Sugumaran (2012). Optimizing the Parameters of Wavelets for Pattern Matching Using GA. IJARET, Volume 3, Issue 1, pp. 77-85.
  21. R. Manimaran, R. ThundilKaruppa Raj and K. Senthilkumar (2012). Numerical Analysis of Direct Injection Diesel Engine Combustion using Extended Coherent Flame 3-Zone Model, 1(8). Research Journal of Recent Sciences, 1-9, 2012.
  22. BhaskaraRao. L and KameswaraRao. C (2012). Buckling of Circular Plates with an internal Elastic Ring Support and outer Edge Restrained against Translation. Journal of Engineering Science & Technology, 7 (3), 398-407.
  23. V.V.Ramalingam, S.Ganeshkumar and V. Sugumaran (2012). Analysis of EEG Signals Using Data Mining Approach. IJCET, Volume 3, Issue 1, pp. 206-212.
  24. V. Muralidharan and V.Sugumaran (2012). A comparative study of Naïve Bayes classifier and Bayes net classifier for fault diagnosis of monoblock centrifugal pump using wavelet analysis. Applied Soft Computing,Volume 12 ,pp 2023–2029.
  25. Hemantha Kumar, T. A. Ranjit Kumar, M. Amarnath and V. Sugumaran (2012). Fault diagnosis of antifriction bearings through sound signals using support vector machine. Journal of vibro engineering, volume 14, issue 4.

2011

  1. Sakthivel G and Nagarajan G (2011). Experimental studies on the performance and emission characteristics of a diesel engine fuelled with ethyl ester of waste fish oil and its diesel blend.Society of Automotive Engineers, SAE paper no 2011-01-2402.
  2. K. Janardhan Reddy, M.Adithan and P.Radhakrishnan (2011). Development of a methodology for retrieval of similarly shaped CAD models. International Journal of Computer Applications in Technology, 40, 4, 286.
  3. R. Manimaran (2011). CFD simulation of non-Newtonian fluid flow in arterial stenoses with surface irregularitiesProceedings of World Academy of Science, Engineering and Technology,73, 957-962.
  4. BhaskaraRao. L and KameswaraRao. C (2011). Fundamental Buckling of Annular Plates with Elastically Restrained Guided Edges against Translation.Mechanics Based Design of Structures and Machines, 39 (4), 409-419.
  5. Saleel Ismail and P. S. Mehta (2011). Second Law analysis of hydrogen-air combustion in a spark ignition engine. International Journal of Hydrogen Energy, 36, 931-946.
  6. Saleel Ismail and P. S. Mehta (2011). Evaluation of the effects of fuel and combustion-related processes on exergetic efficiency. Fuel, 90, 1818-1825.
  7.  Giridharan. A and G. L. Samuel (2013), “Investigation into Energy consumption, Surface roughness and Material Removal Rate of Cylindrical Components Machined using Wire Electrical Discharge Turning Process”, International Journal of Manufacturing Technology and Management, 27(4-6), 170-185.
  8.  Senthil Kumar, M & Elayaperumal A, “Synthesis, Characterization and Sintering Behaviour Influencing Mechanical, Thermal and Physical Properties of Cordierite doped TiO2” International Journal of Materials Research and Technology, Elsevier, 269-275, 2(3), 2013.
  9.  Senthil Kumar M & Elayaperumal A, “Characterization of Cordierite And Cordierite – Zirconia Ceramic Composite Through Precipitation Technique” Proceedings in International Conference on Advances in materials processing and Characterization, 280 – 286, 6 – 8th February 2013.