SMBS - Best Mechanical Engineering College in Chennai

School of Mechanical Engineering (SMEC)

Mechanical Journal & Conference Publications

Research

2016

Journal Publications – Year 2016

2015

  1. Senthil Kumar M, Elayaperumal, A, Vijayaram, TR & Senguttuvan, G, “Processing and Characterization of Pure Cordierite and Zirconia doped Cordierite ceramic composite by precipitation technique” Bulletin of Materials Science, Springer, 679-688, 38(3), 2015.
  2. Undavalli Bhargava Sai Charan & Senthil Kumar M, “Deposition and Characterization of Zns Thin Films on Silicon Substrate by Thermal Evaporation”, International Journal of Applied Engineering Research, 606-609, 10(50), 2015.
  3.  Vijayaram TR, Senthil Kumar M, & Karthikeyan CP, “Emphasis of Investment casting Technologies in Foundries”, Indian Foundry Journal”, 19-25, 61(5), 2015.
  4. Vijayaram TR, Karthikeyan CP, & Senthil Kumar M, “Non Destructive Testing of Castings in Foundries”, International Journal of Production Engineering”, 35-44, 1(1), 2015.
  5. Sushant S Patil, Annamalai. K & Senthil kumar. M, “Prediction of Crack Propagation in Double Cantilever Beam of Carbon Fiber Epoxy Composite”, International Journal of Applied Engineering Research, 10246-10249, 10(11), 2015.
  6. Senthil Kumar M, Elayaperumal, A, & Vijayaram, “Synthesis, Characterization and Sintering Behaviour Influencing Mechanical, Thermal and Physical Properties of Pure Cordierite and Cordierite-CeO2”, Journal of Advanced Ceramics, Springer, 22-30, 4(1), 2015.
  7. Sasikumar.M, Balaji.R, “Mechanical, ablative, and thermal properties of cenosphere‐filled ceramic/phenolic composites” Polymer Composites, Online version, Sage Publications, 2015.
  8. Sasikumar M, Balaji R, Elayaperumal A “Thermal, Thermo oxidative and Ablative behavior of cenosphere filled ceramic/phenolic composites” Polymer degradation and stability, 125-132, 114, 2015.
  9. Giridharan. A and G. L. Samuel (2015), “Modeling and Analysis of Crater Formation during Wire Electrical Discharge Turning (WEDT) Process”, International Journal of Advanced Manufacturing Technology, 77, 1229–1247.
  10.  R. Jegadeeshwaran, V. Indira and V. Sugumaran, Determination of minimum sample size for fault diagnosis of automobile hydraulic brake system using Power Analysis, Engineering Science and Technology: an International Journal, 18 (1), 59-69, 2015.
  11.  Akhil Muralidharan, V. Sugumaran, K.P. Soman, Bearing fault diagnosis using vibration signals by variational mode decomposition and Naïve Bayes classifier, International Journal of Automation, Issue 1, Vol. 1, 1-14, 2015.
  12.  R. Jegadeeshwaran, V. Sugumaran, A Comparative study of Naïve Bayes Classifier and Bayes net Classifier for fault diagnosis of Automobile hydraulic brake system, International Journal of Decision support systems, Vol. 1, Issue 1, 2015.
  13.  M. Amarnath, Deepak Jain, V. Sugumaran, R. Hemantha Kumar, Fault Diagnosis of Helical Gear Box Using Naïve Bayes And Bayes Net, International Journal of Decision Support Systems, Vol. 1, Issue 1, PP. 4-17, 2015 Inderscience publisher.
  14.  V. Muralidharan, N.R. Sakthivel and V.Sugumaran, Fault Diagnosis of Monoblock Centrifugal Pump Using Stationary Wavelet Features and Bayes Algorithm, Asian Journal of Science and Applied Technology, Vol.3, Issue. 3, pp. 1-4, 2015.
  15.  R. Jegadeeshwaran V. Sugumaran and K. P. Soman, Vibration Based Fault Diagnosis Of A Hydraulic Brake System Using Variational Mode Decomposition (VMD), SDHM: Structural Durability & Health Monitoring, accepted for publication on 18.2.2015.
  16. Shalet K S, Jegadeeshwaran R, Sugumaran V, Elangovan M; Condition Monitoring of Single Point Cutting Tool Using ARMA Features And SVM Classifiers, International Journal of Applied Engineering Research, (IJAER), 2015.
  17. Akhil Muralidharan, V. Sugumaran, K.P Soman, M. Amarnath, Fault Diagnosis Of Helical Gear Box Using Variational Mode Decomposition And Random Forest Algorithm, SDHM: Structural Durability & Health Monitoring, Accepted on 19.03.2015.
  18.  Ragul Kumar Sharma, V Sugumaran, H Kumar, M Amarnath, A comparative study of naive Bayes classifier and Bayes net classifier for fault diagnosis of roller bearing using sound signal, International Journal of Decision Support Systems 1 (1), 115-129, 2015.
  19.  Aditya V Rao, V. Sugumaran, K. I. Ramachandran, A Comprehensive Study of Fault Diagnostics of Roller Bearings Using Continuous Wavelet Transform, International Journal of Manufacturing System and Design 1 (1), 1-20, 2015.
  20.  V.Sugumaran, M. Elangovan, N.R.Sakthivel, S.Saravanamurugan, Binoy.B.Nair, Machine Learning Approach to the Prediction of Surface Roughness using Statistical Features of Vibration Signal Acquired in Turning, Procedia Computer Science 50, 282-288, Elsevier, 2015.
  21.  V.Sugumaran, R. Jegadeeshwaran, Health Monitoring of a Hydraulic Brake System Using Nested Dichotomy Classifier – A Machine Learning approach, International Journal of Prognostics and Health Management 6 (1(014)), 10, 2015.
  22.  V.Sugumaran, R. Jegadeeshwaran, A comparative study of navie Bayes classifier and Bayes net classifier for fault diagnosis of Automobile Hydraulic brake system, Internation Journal of Decision Support System 1 (3), 247-267, 2015.
  23.  V.Sugumaran, R. Jegadeeshwaran, Fault diagnosis of automobile hydraulic brake system using statistical features and support vector machines, Mechanical Systems and Signal Processing 52, 436-446, 2015, Elsevier.
  24.  V Sugumaran, Aditya V Rao, KI Ramachandran, A Comprehensive Study of Fault Diagnostics of Roller Bearings Using Continuous Wavelet Transform, International Journal of Manufacturing Systems and Design 1 (1), 27-46, 2015.
  25.  V.Sugumaran, R. Jegadeeshwaran, Fuzzy classifier with automatic rule generation for fault diagnosis of hydraulic brake system using statistical features, International Journal of Fuzzy Computation and Modelling 1 (3), 333-350, 2015.
  26.  V Sugumaran, V. Sabarinathan, K. Rajesh Khanna, V. J. Sarath Kumar, A Comparative Study on Naïve Bayes and Bayes Net Classifiers for the Heart Disease Prediction System, International Journal of Mechanical Handling and Automation 1 (1), 1-7, 2015.
  27.  Hemanth Mithun Praveen, V. Sugumaran, Harvesting Vertical Vibration Of Automotive Tyre To Monitor Tyre Pressure Using Applied Machine Learning Technique, International Journal of Applied Engineering Research (IJAER), Accepted for publication on 30 June 2015.
  28.  Sathish kumar V Sugumaran; remaining life time prediction of bearings through classification using decision tree algorithm , International Journal Of Applied Engineering Research (IJAER) Vol.10, 2015 rip
  29.  V. Sugumaran and A. Joshuva; speech recognition for humanoid robot, International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp.57-60 2015 rip scopus indexed
  30.  Rajesh kanna. K Sabarinathan. V Sarath kumar. V. J and Sugumaran. V; eye state prediction using eeg signal and c4.5 decision tree algorithm, International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp.167-171 2015 rip scopus indexed
  31.  V. Sugumaran and A. Arjun; human tracking system, International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp. 181-184 2015 rip scopus indexed
  32.  V. Sugumaran V. Vipin; gesture recognition system for dynamic user interface , International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp.185-190 2015 scopus indexed
  33.  B. Rebecca jeya vadhanam S. Mohan and V. Sugumaran; classification of advertisement and non-advertisement videos with bicc features using csca algorithm , International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp.191-196 2015 rip scopus indexed
  34.  A. Ramu, V. Sugumaran and M. Amarnath; fault diagnosis of gear using histogram features of vibration signals and classifier ensemble, International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp.234-238 2015 rip scopus indexed
  35.  V. Sugumaran A. Ramu.; fabrication and actuation of humanoid robot hand, International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp.318-321 2015 rip scopus indexed
  36.  V. Sugumaran and R. Jegadeeshwaran; a comparative study of tree family classifiers for fault diagnosis of an automobile hydraulic brake system using statistical features, International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp.322-327 2015 rip scopus indexed
  37.  K. Balachandar, V. Sugumaran, R. Jegadeeshwaran and M.Amarnath; fault diagnosis of bearing using sound signals through histogram features and decision tree, International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68, pp.476-481 2015 rip scopus indexed
  38.  Joshuva, V. Sugumaran and M. Amarnath; Selecting Kernel Function Of Support Vector Machine For Fault Diagnosis Of Roller Bearings Using Sound Signals Through Histogram Features, International Journal Of Applied Engineering Research (IJAER) Vol.10, Issue 68 pp.482-487 2015, scopus indexed
  39.  Jegadeeshwaran, R; Sugumaran, V; Fault diagnosis of automobile hydraulic brake system using statistical features and support vector machines, Mechanical Systems and Signal Processing, Vol. 52-53, 2015
  40.  S.Sivarajan R.Padmanabhan, SURFACE ENGINEERED COATINGS FOR AUTOMOTIVE INDUSTRIES(2015) Journal of Chemical and Pharmaceutical Sciences. ISSN: 0974-2115, JCHPS Special Issue 7: 2015
  41.  Sushant Chougle, VG Sridhar & Senthil Kumar M, “Friction Stir Welding of Dissimilar Materials of Aluminium (1100) Alloy to Brass”, International Conference On Technological Convergence For Information, Health, Food and Energy Security, 1-2 May 2015.

2014

  1. Rakesh K. Rajan, Hemant Kumar, S.K. Albert, T.R. Vijayaram, Sliding friction and wear characteristics of grade 410 martensitic stainless steel, Applied Mechanics and Materials Vols. 592-594 (2014) pp 1346-1351,Trans Tech Publications,Switzerland, 2014
  2. Saleel Ismail and P S Mehta (2014). A Phenomenological Model for Predicting Entropy Generation during Vaporization of Droplets in Engine Fuel Sprays. Applied Mechanics and Materials, vols. 592-594, pp 1403-1407.
  3. Parag J Tarwadi and ArockiaSelvakumar A (2014). Vision Based Pick and Place Robot for Sorting objects Using MATLAB. Applied Mechanics and Materials, vol.no.592-594, pp 2314-2318.
  4. Vinay Varghese, K. Annamalai, and K. Santhosh Kumar (2014). Optimisation of machining parameters for high feed end milling on INCONEL 718 Super alloy. Applied Mechanics and Materials, Vols. 592-594, pp 584-590.
  5. EaswaraPillai Raj Kumar and KrishnamoorthiAnnamalai (2014). Investigation into optimal fixturing cost of an assembly using genetic algorithm. Engineering Review, Vol. 34, No. 2, pp.85-91.
  6. Govinda A and Annamalai.K (2014). Design and Analysis of Arc spring used in dual mass flywheel. International Journal of Engineering and Technology Research, Vol.2, Issue.1.
  7. WankhadeNiteshPrakash, V. G. Sridhar and K. Annamalai (2014). New product development by DFMA and Rapid prototyping. ARPN Journal of Engineering and Applied Sciences, Vol. 9, No. 3, pp. 274-279.
  8. G.Sakthivel, M.Ilangkumaran, G.Nagarajan and AdityaBajiroGaikwad (2014). Comparative analysis of performance, emission and combustion parameters of diesel engine fuelled with ethyl ester of fish oil and its diesel blends. Fuel, Vol. 132, pp 116-124.
  9. ShridharKullolli, G.Sakthivel and M.Ilangkumaran (2014). A neural network model for the prediction of CI engine performance at different injection timings. International Journal of Ambient Energy, DOI;10.1080/01430750.2014.931297.
  10. D.DavidsonJebaseelan,C. Jebaraj,N. Yoganandan, S. Rajasekaran, and J. Yerramshetty (2014). Biomechanical responses due to discitis infection of a juvenile thoracolumbar spine using finite element modeling. Med EngPhys,Volume 36, Issue 7, pp 938–943.
  11. WankhadeNiteshPrakash, V. G. Sridhar and K. Annamalai (2014). New product development by dfma and rapid prototyping. ARPN Journal of Engineering and Applied Sciences, VOL. 9, NO. 3, pp 274-279.
  12. Parag J Tarwadi and ArockiaSelvakumar A (2014). Based Pick and Place Robot for Sorting objects Using MATLAB. Vision. Applied Mechanics and Materials, 592-594, 2314-2318.
  13. G.Sakthivel, M.Ilangkumaran, and G.Nagarajan (2014). Multi-criteria decision modeling approach for biodiesel blend selection based on GRA-TOPSIS analysis. International Journal of Ambient Energy, vol.35, pp.139-154.
  14. G.Sakthivel, M.Ilangkumaran, G.Nagarajan, AdityaBajiroGaikwad (2014). Comparative analysis of performance, emission and combustion parameters of diesel engine fuelled with ethyl ester of fish oil and its diesel blends. Fuel, vol. 132, pp: 116-124.
  15. ShridharKullolli, G.Sakthivel and M.Ilangkumaran (2014). A neural network model for the prediction of CI engine performance at different injection timings. International Journal of Ambient Energy,DOI;10.1080/01430750.2014.931297.
  16. C.N.Jayapragasan, M.SaiPhani Deep Kumar and K.Janardhan Reddy (2014). Redesign and Validation of an Industrial Blower. International Journal of Innovative Research in Science, Engineering and Technology, 3, 13999.
  17. Renganathan, M and Rajagopal T (2014). Computational Study of HCCI-DI Combustion at Preheated and Supercharged Inlet Air Conditions. SAE Technical Paper 2014-01-1108, DOI: 10.4271/2014-01-1108.
  18. Manimaran R. and ThundilKaruppa Raj R (2014). Comparative Evaluation of Re-entrant and Flat Toroidal Combustion Chambers in a Direct Injection Diesel Engine using Computational Fluid Dynamics. Computational Thermal Sciences, 6 (2), 171–190,DOI: 10.1615 /ComputThermalScien.2014010594.
  19. Manimaran R. and ThundilKaruppa Raj R (2014). Computational Studies of Swirl Ratio and Injection Timing on Atomization in a Direct Injection Diesel Engine. Frontiers in Heat and Mass Transfer (FHMT), 5 – 2, doi: 10.5098/hmt.5.2.
  20. PA Ramakrishna, M Ramakrishna and R Manimaran (2014). Experimental Investigation of Temperature Separation in a Counter-Flow Vortex Tube. Journal of Heat Transfer vol.136 (8), pp:082801.
  21. LokavarapuBhaskaraRao and ChellapillaKameswaraRao (2014). Analysis of annular plates with inner and outer edges elastically restrained and resting on Winkler foundation. Frequency. International Journal of Mechanical Sciences, vol. 81(4), pp:184-194.
  22. LokavarapuBhaskaraRao and ChellapillaKameswaraRao (2014). Frequencies of circular plate with concentric ring and elastic edge support. Frontiers of Mechanical Engineering, vol.9 (2), pp: 168-176.
  23. LokavarapuBhaskaraRao and ChellapillaKameswaraRao (2014). Buckling of circular plate with foundation and elastic edge. International Journal of Mechanics and Materials in Design,10(2), [DOI 10.1007/s10999-014-9261-2].
  24. S.Sivarajan and R.Padmanabhan (2014). Tribological performance of environment friendly surface modified die in deep drawing. Arpn journal of engineering and applied sciences. vol 9 (5 ), issn 1819-6608.
  25. TadisettiPremsai, AngaKiranVikramVarma and S.Sivarajan (2014). Failure analysis of rollers in mill stands using failure mode effect analysis. International journal of engineering sciences & research technology, volume 3(7) pp:151.
  26. Saleel Ismail and P. S. Mehta (2014). A phenomenological model for predicting entropy generation during vaporization of droplets in engine fuel sprays. Applied Mechanics and Materials, 592-594, 1403-1407.
  27. MogrekarAshish and Sivakumar R (2014). CFD analysis of Micro ramps for hypersonic flows. Applied Mechanics and Materials, vol. 592-594, 1962-1966.
  28. Jafferson.JM, Hariharan. P and Ramkumar.J (2014). Effects of ultrasonic vibration and magnetic field in micro-EDM milling of non magnetic material. Materials and Manufacturing Processes, vol.29, pp.357-363.
  29. AbhinavAggarwalSugumaran, M. Amarnath and Hemantha Kumar (2014). Fault Diagnosis of Helical Gear Box using Logistic Function and REP Tree. International Journal of Research in Mechanical Engineering Vol.2, Issue-1, pp: 26-32.
  30. Hemantha Kumar, T. A. Ranjit Kumar, M. Amarnath, V. Sugumaran (2014). Fault diagnosis of bearings through vibration signal using Bayes classifiers. Int. J. Computer Aided Engineering and Technology, Vol. 6(1).
  31. SanidhyaPainuli , M. Elangovan and V. Sugumaran (2014). Tool condition monitoring using K-star algorithm. Expert Systems with Applications , Vol. 41 , pp: 2638–2643.
  32. AbhishekSharma V. Sugumaranand S. BabuDevasenapati (2014). Misfire detection in an IC engine using vibration signal and decision tree algorithms. Measurement,Volume 50 ,pp 370–380.
  33. AjithGopinath, Senthil Kumar M and ElayaPerumal A (2014). Experimental Investigation on Mechanical Properties of Natural Fiber Reinforced Composite with Polyester and Epoxy Resin. Journal of Procedia Engineering.
  34. Sasikumar M, Balaji R, “A study on the effect of cenosphere on thermal and ablative behavior of cenosphere loaded ceramic/phenolic composites” Polymer, 6634-6639, 55(25), 2014.
  35. Sasikumar M, Siddarthan K S, “Mechanical and Thermal properties of Glass/ Polyester Composite with Glycerol as additive” International Journal of Engineering trends and Technology, 61-64, 7(2), 2014.
  36.  V.Anand Rao, R.Deivanathan, “Experimental Investigations for Welding Aspects of Stainless Steel 310 for the Process of TIG Weldinng”, Proceedia Engineerinng, V97, 2014, pp902-908.(citation:1)
  37.  Sushant Sukumaran, R,Deivanathan, “Optimum linkage for biped mechanism”, Proceedia Engineering, V97, 2014, pp1322-1331.
  38.  Hemantha Kumar, M. Amarnath and V. Sugumaran; Fault Diagnosis of Helical Gear Box using Large Margin K-Nearest Neighbors Classifier using Sound Signals, Journal of Vibration Engineering and Technologies, 2014.
  39.  R. Jegadeeshwaran and V.Sugumaran,; Condition Monitoring of a Hydraulic Brake System Using Sequential Minimal Optimization (SMO) Algorithm, International Journal of Engineering Research & Management, 2014.
  40.  R. Jegadeeshwaran, V. Sugumaran, Brake Fault Diagnosis using Clonal Selection Classification Algorithm (CSCA) – A Statistical Learning Approach, Engineering Science and Technology, an International Journal.
  41.  R. Jegadeeshwaran, V. Sugumaran, Vibration based fault diagnosis study of an automobile Brake system using k star (k*) algorithm – a statistical approach, Recent patents in signal processing, accepted for publication.
  42.  V. Muralidharan, V. Sugumaran, V. Indira; Fault Diagnosis of Monoblock Centrifugal pump using SVM, Engineering Science and Technology: an International Journal, 1, 1, 2014, Elsevier.
  43.  N. Gangadhar, Hemantha Kumar, S. Narendranath, V. Sugumaran, Fault Diagnosis of Single Point Cutting Tool through Vibration Signal Using Decision Tree Algorithm, Procedia Materials Science, Volume 5, 2014, Pages 1434–1441.
  44.  A. Kannan, V. Sugumaran, Amarnath, K.P. Soman, Fault diagnosis of helical gear box using variational mode decomposition with naïve Bayes and Bayes net classifiers through vibration signals, International Journal of Manufacturing Systems and Design, Accepted on 30.10.14.
  45.  V. Sabarinathan and V. Sugumaran, Diagnosis of Heart disease using Decision Tree, International Journal of Research in Computer applications and Information Technology, Vol. 2, Issue 6, PP. 74-49, IASTER.
  46.  S.Sivarajan,R.Padmanabhan, Green Machining and Forming by the use of Surface coated tools(2014) Procedia Engineering 97 ( 2014 ) 15 – 21.
  47.  Rohit Kaushik, Shubham Gupta, Sivarajan S Surface Modification of Mild Steel with Molybdenum Disulfide by Tungsten Inert Gas International Review of Mechanical Engineering (I.RE.M.E.), Vol. 8, N. 6 ISSN 1970 – 8734 November 2014.

2013

  1. ThoguluvaRaghavanVijayaram, Triz methodology in sand casting process Part 1, Metal world international magazine, (Journal ISO 9001: 2008 certified), Mumbai, India, Volume 13, Number 07, pp: 29-33, July 2013
  2. ThoguluvaRaghavanVijayaram, Triz methodology in sand casting process Part 2, Metal world international magazine, (Journal ISO 9001: 2008 certified), Mumbai, India, Volume 13, Number 08, pp: 31-34, August 2013
  3. ThoguluvaRaghavanVijayaram, Quality control engineering in foundries, Metal world international magazine, (Journal ISO 9001: 2008 certified), Mumbai, India, Volume 13, Number 09, pp: 18-27, September 2013
  4. ThoguluvaRaghavanVijayaram and AjithGopinath, Heat treatment of EN-8 steel casting samples, Metal world international magazine, (Journal ISO 9001: 2008 certified), Mumbai, India, Volume 12, Number 10, pp: 34-37, October 2013
  5. T.R.Vijayaram and O.S.Sandeep, Effect of heat treatment of cast EN–9 steel with different quenchants, Foundry Review Magazine, MMR established 1948, BrajBinani Group, Asian Industry and Information Services Pvt. Ltd., Mumbai 400011, India, Techno track, Volume 1, Issue 15, page: 2-3, November 2013
  6. T.R.Vijayaram and R.Kasilingam, Semisolid processing of metal matrix composite castings, Metal world international magazine, (Journal ISO 9001: 2008 certified), Mumbai, India, Volume 14, Number 11, pp: 34-38, November 2013
  7. E.Rajkumarand K.Annamalai (2013). An Investigation on Computer Aided Fixture Design and Analysis using FEM Approach. European Journal of Scientific Research, Vol. 107 No 2.
  8. N. Suprith, K.Annamalai, C.D. Naiju, and ArjunMahadevan (2013). Design and Analysis of Automotive Multi-leaf spring using Composite materials. Applied Mechanics and Materials Vol. 372, pp 533-537.
  9. Gaurav S. Harane and K.Annamalai (2013). Design and Optimization of Pile Tip for offshore Drilling Rig Foundation. International Journal of Research in Mechanical Engineering, Vol. 1, Issue 2, pp. 39-44.
  10. G.Sakthivel, and M.Ilangkumaran (2013). Development of decision support system to select the best fuel blend in IC engines to enhance the energy efficiency. International Journal of Energy Technology and Policy, Vol.9, no.3-4, pp 310 -343.
  11. M.Ilangkumaran and G.Sakthivel (2013). Development of fuzzy logic model to predict the engine performance of fish oil biodiesel with diethyl ether. International Journal of Ambient Energy, DOI– 10.1080/01430750.2013.829786
  12. G.Sakthivel, M.Ilangkumaran, G.Nagarajan, A.Raja, P.M.Ragunadan and J.Prakash(2013). A hybrid MCDM approach for evaluating an automobile purchase model.International journal of Information and Decision Sciences. Vol 5, c50-85.
  13. G.Sakthivel, M.Ilangkumaran, G.Nagarajan, P.Shanmugam and J.Prakash (2013). Effect of fuel additives on performance and exhaust emissions of direct injection diesel engine operating on B20 waste fish oil. International Journal of Oil, Coal and Gas Technology, Vol6,Vol: 462 – 476.
  14. G.Sakthivel, M.Ilangkumaran, and G.Nagarajan (2013). A Hybrid Multi-Criteria Decision Support System for Selection of Optimum Fuel Blend. International journal of Exergy, Vol. 12, PP 463 – 490.
  15. G.Sakthivel, M.Ilangkumaran and G.Nagarajan (2013). Selection of best biodiesel blend for IC engines: An integrated approach with FAHP -TOPSIS and FAHP-VIKOR. International Journal of Oil, Gas and Coal Technology, Vol6, PP: 518 – 612.
  16. G.Sakthivel, and M.Ilangkumaran (2013). Development of decision support system to select the best fuel blend in IC engines to enhance the energy efficiency. International Journal of Energy Technology and Policy, vol 9, pp:310 – 343.
  17. G.Sakthivel, G.Nagarajan, and M.Ilangkumaran (2013). Predicting the Engine Performance Using Ethyl Ester of Fish Oil with the aid of Artificial Neural Network. International Journal of Ambient Energy, vol 34, pp: 145-158.
  18. G.Sakthivel, M.Ilangkumaran, and G.Nagarajan (2013). Experimental investigations of the performance, emission and combustion characteristics of a biodiesel (ethyl ester of fish oil) fuelled direct-injection diesel engine. International Journal of Vehicle Performance, vol 1, pp:137-156.
  19. M.Ilangkumaran, G.Sakthivel, V.Sasirekha and L.Anojkumar (2013). Optimization of wastewater treatment technology selection using hybrid MCDM. International Journal of Management of Environmental Quality, vol 24, PP:619 – 641.
  20. G.Sakthivel and M.Ilangkumaran (2013). Development of fuzzy logic model to predict the engine performance of fish oil biodiesel with diethyl ether. International Journal of Ambient Energy –10.1080/01430750.2013.829786.
  21. Donnell James and K. Janardhan Reddy (2013). Conceptual Product Development of Punch cum Stapler. International Journal of Research in Mechanical Engineering, 1, 1, 76
  22. PremanReynold Joseph T and K. Janardhan Reddy (2013). Study of Quality Function Deployment Tool in a New Product Development-Carding Machine. International Journal of Research in Mechanical Engineering, 1, 1,117.
  23. Sumedh J. Suryawanshi and K. Janardhan Reddy (2013). Conceptual Product Development of Wheelchair for People Disabled in Legs. International Journal of Research in Mechanical Engineering, 1, 2, 1.
  24. Manimaran R. and ThundilKaruppa Raj R (2013). CFD Analysis of Combustion and Pollutant Formation Phenomena in a Direct Injection Diesel Engine at different EGR Conditions. Procedia Engineering, vol. 64, pp: 497 – 506, doi:10.1016/j.proeng.2013.09.124.
  25. Manimaran R. and ThundilKaruppa Raj R (2013). Numerical Investigations of Spray Droplet Parameters in a Direct Injection Diesel Engine using 3-Z Extended Coherent Flame Model. Advanced, Materials Research, 768,226-230, doi: 10.4028/www.scientific.net/AMR.768.226.
  26. Manimaran R. and ThundilKaruppa Raj R (2013). Numerical Investigations on Combustion and Emission Characteristics in a Direct Injection Diesel Engine at Elevated Fuel Temperatures. Frontiers in Heat and Mass Transfer (FHMT), 4, 013008, DOI: 10.5098/hmt.v4.1.3008.
  27. R. Manimaran, and R. ThundilKaruppa Raj, K. Senthilkumar (2013). Premixed Charge Compression Ignition in Direct Injection Diesel Engine using Computational Fluid Dynamics. WSEAS Transactions on Heat and Mass Transfer, vol 8(1), pp: 16-24.
  28. Bhaskara Rao. L and Kameswara Rao. C (2013). Vibrations of elastically restrained circular plates resting on Winkler foundation. Arabian Journal for Science and Engineering, vol 38 (11), pp: 3171-3180.
  29. BhaskaraRao. L and KameswaraRao. C (2013). Frequencies of circular plates weakened along an internal concentric circle and elastically restrained edge against translation. Journal of Applied Mechanics Transactions of the ASME, 2013, Vol. 80/011005-1.
  30. BhaskaraRao. L and KameswaraRao. C (2013). Buckling of Annular Plates with Elastically Restrained External and Internal Edges. Mechanics Based Design of Structures and Machines, vol. 41 (2), pp: 222-235.
  31. BhaskaraRao. L and KameswaraRao. C (2013). Fundamental buckling of circular plates with elastically restrained edges and resting on concentric rigid ring support.Frontiers of Mechanical Engineering, vol. 8(3), pp: 291-297.
  32. Kiranverghese ,Rakesh K Rajan, Sivarajan S (2014). Optimisation of cutting parameters using taguchi method in composite materials. International journal of scientific and engineering research (ISJER), volume 4(10) pp: 2229-5518.
  33. Jafferson.JM, Hariharan. P (2013). Machining performance of cryogenically treated electrodes in micro electric discharge machining: A comparative experimental study. Materials and Manufacturing Processes, vol. 28, pp.397-402.
  34. Jafferson.JM and Hariharan. P (2013). Investigation on the quality of micro holes machined by µEDM using image processing. Materials and Manufacturing Processes, vol.28, pp. 1356-1360.
  35. Senthil Kumar, M and Elayaperumal A (2013). Synthesis, Characterization and Sintering Behaviour Influencing Mechanical, Thermal and Physical Properties of Cordierite doped TiO2. International Journal of Materials Research and Technology, vol. 2(3). pp: 269-275.
  36. Balamuruga Mohan Raj G and V. Sugumaran (2013). Regression and Least Median Square Analysis to Predict the Surface Roughness in Boring Operation. IJLSC 5(1), pp: 1-7.
  37. V. Sugumaran, Deepak jain, M. Amarnathand Hemanthkumar (2013). Fault diagnosis of Helical gear Box Using Decision Tree Through Vibration Signals. International Journal of Performability Engineering Vol. 9, No. 2, pp. 195- 208.
  38. R. Jegadeeshwaran and V. Sugumaran (2013). Comparative study of decision tree classifier and best first tree classifier for fault diagnosis of automobile hydraulic brake system using statistical features. Measurement , Volume 46, pp 3247–3260.
  39. R.Jegadeeshwaran and V. Sugumaran (2013). Method and Apparatus for Fault Diagnosis of Automobile Brake System Using Vibration Signals. Recent Patents on Signal Processing, Volume3, pp2-11.
  40. Balamuruga Mohan Raj. G, Sugumaran. V (2013). Developing Gaussian Process Model to Predict theSurface Roughness in Boring Operation. International Journal of Engineering Trends and Technology– Vol.4 Issue. 3.
  41. Abhishek Sharma, V. Sugumaran, S. BabuDevasenapati (2013). Misfire Detection in an IC Engine Using Vibration Signal and Bagging Classifier. International Journal of Engineering Innovation & Research Vol. 2, Issue 4.
  42. V. Muralidharan and V. Sugumaran (2013). Selection of discrete wavelets for fault diagnosis of Monoblock centrifugal pump using the j48 algorithm. Applied Artificial Intelligence, DOI:10.1080/08839514.2012.721694.
  43. M. Amarnath, Deepak Jain, V. Sugumaran and Hemantha Kumar (2013). Fault diagnosis of helical gear box using naïve Bayesand Bayes net. Int. J. Decision Support Systems.
  44. V. Muralidharanand V. Sugumaran(2013). Feature extraction using wavelets and classification through decision tree algorithm for fault diagnosis of mono-block centrifugal pump. Measurement , Volume 46, pp 353–359.
  45. M. Amarnath, V. Sugumaran, Hemanthakumar (2013). Exploiting sound signals for fault diagnosis of bearings using decision tree. Measurement , Volume 46, pp 1250–1256.
  46. Kale AjinkyaPravin, Prof. R. Jegadeeshwaran, Dr.V. Sugumaran(2013). Roller Bearing Fault Diagnosis by Decision Tree Algorithms with Statistical Feature. International Journal of Research in Mechanical Engineering. Vol. 1, Issue 1, pp. 01-09.
  47. V. V.Ramalingam, S. Mohan, V. Sugumaran (2013). A Comparison of EMG and EEG Signalsfor Prostheses Control using Decision Tree. International Journal of Research in Computer Applications & Information Technology Volume 1, Issue 1,pp. 01-08.
  48. M. Amarnath, Deepak JainV. Sugumaran and Hemantha Kumar (2013). Fault Diagnosis of Helical Gear Box Using Decision Tree and Best-First Tree. International Journal of Research in Mechanical Engineering. Vol. 1, Issue 1, pp. 22-33.
  49. AnishBahri, V.Sugumaran, S. BabuDevasenapati (2013). Misfire Detection in IC Engine using Kstar Algorithm. International Journal of Research in Mechanical Engineering.Volume 1, Issue 1, pp. 103-110.
  50. B. Rebecca JeyaVadhanam,S. Mohan,V. Sugumaran (2013). A Classification Performance on Multiple Frames of Advertisement and Non Advertisement Videosusing C4.5 Algorithm. International Journal of Research in Computer Applications & Information Technology Vol.1, Issue 2, pp: 01-07.
  51. SiddhantSahu, and V. Sugumaran (2013). Bayesian Sample Size Determination of Vibration Signals in Machine Learning Approach to Fault Diagnosis of Roller Bearings. International Journal of Research in Mechanical Engineering. Vol. 1, Issue 1, pp: 55-63.
  52. PiyushChaskar and V. Sugumaran (2013). Voice Command Wheelchair Navigation using K Star Classifier. International Journal of Research in Mechanical Engineering. Volume 1, Issue 2, pp. 73-79.
  53. Vedant, V. Sugumaran, M. Amarnath and Hemantha Kumar (2013). Fault Diagnosis of Helical Gear Box Using Sound Signal using Naïve Bayes and Bayes Net. International Journal of Engineering & Technology Research. Volume-1, Issue-1, pp. 98-105.
  54. V. Muralidharan and V. Sugumaran (2013). Fault diagnosis of centrifugal pump using wavelet features – fuzzy-based approach. Int. J. Computational Systems Engineering.
  55. Giridharan. A and G. L. Samuel (2013), “Investigation into Energy consumption, Surface roughness and Material Removal Rate of Cylindrical Components Machined using Wire Electrical Discharge Turning Process”, International Journal of Manufacturing Technology and Management, 27(4-6), 170-185.
  56. Senthil Kumar, M & Elayaperumal A, “Synthesis, Characterization and Sintering Behaviour Influencing Mechanical, Thermal and Physical Properties of Cordierite doped TiO2” International Journal of Materials Research and Technology, Elsevier, 269-275, 2(3), 2013.
  57.  Senthil Kumar M & Elayaperumal A, “Characterization of Cordierite And Cordierite – Zirconia Ceramic Composite Through Precipitation Technique” Proceedings in International Conference on Advances in materials processing and Characterization, 280 – 286, 6 – 8th February 2013.

2012

  1. Saleel Ismail and P S Mehta (2012). Second-Law Analysis of Fuel-Air Mixing and Combustion Subprocesses in a Heterogeneous Charge Engine. Journal of Automobile Engineering, vol. 226, no. 6, pp 815–827.
  2. Dr. M. Ilangkumaran, Dr. G. Sakthivel , U. Syam Kumar, M. Vasudevan, S. Venkatesh& B. Viswanathan (2012). Development of fuzzy logic model to predict the engine performance of fish oil biodiesel with diethyl ether. International Journal of Ambient Energy, DOI: http://dx.doi.org/10.1080/01430750.2013.829786
  3. N.R. Sakthivel, Binoy.B.Nair, V. Sugumaran (2012). Soft computing approach to fault diagnosis of centrifugal pump. Applied Soft Computing, Volume 12 pp.1574–1581.
  4. N.R. Sakthivel V. Sugumaran, Binoy.B.Nair (2012). Automatic rule learning using rough set for fuzzy classifier in fault categorization of mono-block centrifugal pump. Applied Soft Computing, Volume 12 pp. 196–203.
  5. V. Indira, R.Vasanthakumari,V. Sugumaran (2012). Sample size determination for classification ofEEG signals using power analysis in machinelearning approach. IJARET, Volume 3, Issue 1, pp. 01-09
  6. V. Muralidharan, Hemanthakumar and V. Sugumaran (2012). Fault diagnosis of monoblock centrifugal pump using discrete wavelet features and J48 algorithm. IJMET, Volume 3, Issue 1, pp. 120-126.
  7. Manju B R, RajanA R, V. Sugumaran (2012). Optimizing the parameters of wavelets for pattern matching using GA. IJARET, Volume 3, Issue 1, pp. 77-85.
  8. V.V.Ramalingam, S.Ganeshkumar, V. Sugumaran (2012). Analysis of EEG signals using data mining approach. IJCET, Volume 3, Issue 1, pp. 206-212.
  9. V. Muralidharan and V.Sugumaran (2012). A comparative study of Naïve Bayes classifier and Bayes net classifier for fault diagnosis of monoblock centrifugal pump using wavelet analysis. Applied Soft Computing, Volume 12,pp 2023–2029.
  10. Hemantha Kumar, T. A. Ranjit Kumar, M. Amarnath, V. Sugumaran (2012). Fault diagnosis of antifriction bearings through sound signals using support vector machine. Journal of Vibro engineering, volume 14, issue 4.
  11. M.B.Shyam Kumar and S.Vengadesan (2012). Influence of rounded corners on flow interference due to square cylinders using immersed boundary method. ASME Journal of Fluids Engineering, Volume 134, Issue 9, Pages 091203(1–23).
  12. ThundilKaruppa Raj R. and Manimaran R (2012). Effect of Swirl in a Constant Speed DI Diesel Engine using Computational Fluid Dynamics. CFD Letters, 4(4), 2012 214-224.
  13. L. B. Rao and C. K. Rao (2012). Vibrations of circular plates with guided edge and resting on elastic foundation. Journal of Solid Mechanics, 4(3), 307-312.
  14. BhaskaraRao. L and KameswaraRao. C (2012). Free Vibration of Circular Plate with Elastic Edge Support and Resting on Elastic Foundation. International Journal of Acoustics and Vibration, 17 (4), 204-207.
  15. Saleel Ismail and P. S. Mehta (2012). Second-law analysis of fuel-air mixing and combustion subprocesses in a heterogeneous charge engine. Journal of Automobile Engineering, 226(6), 815–827.
  16. N.R. SakthivelBinoy. B.Nair and V. Sugumaran (2012). Soft computing approach to fault diagnosis of centrifugal pump. Applied Soft Computing,Volume 12 pp.1574–1581.
  17. N.R. Sakthivel, V. Sugumaran, Binoy.B.Nair (2012). Automatic rule learning using rough set for fuzzy classifier in fault categorization of mono-block centrifugal pump. Applied Soft Computing, Volume 12 pp. 196–203.
  18. V. Indira, R.Vasanthakumari and V. Sugumaran (2012). Sample Size Determination for Classification ofEEG Signals Using Power Analysis in MachineLearning Approach. IJARET, Volume 3, Issue 1, pp. 01-09.
  19. V. Muralidharan, Hemanthakumar and V. Sugumaran (2012). Fault Diagnosis of Monoblock Centrifugal Pump Using Discrete Wavelet Features and J48 Algorithm. IJMET, Volume 3, Issue 1, pp. 120-126.
  20. Manju B R ,Rajan A R, and V. Sugumaran (2012). Optimizing the Parameters of Wavelets for Pattern Matching Using GA. IJARET, Volume 3, Issue 1, pp. 77-85.
  21. R. Manimaran, R. ThundilKaruppa Raj and K. Senthilkumar (2012). Numerical Analysis of Direct Injection Diesel Engine Combustion using Extended Coherent Flame 3-Zone Model, 1(8). Research Journal of Recent Sciences, 1-9, 2012.
  22. BhaskaraRao. L and KameswaraRao. C (2012). Buckling of Circular Plates with an internal Elastic Ring Support and outer Edge Restrained against Translation. Journal of Engineering Science & Technology, 7 (3), 398-407.
  23. V.V.Ramalingam, S.Ganeshkumar and V. Sugumaran (2012). Analysis of EEG Signals Using Data Mining Approach. IJCET, Volume 3, Issue 1, pp. 206-212.
  24. V. Muralidharan and V.Sugumaran (2012). A comparative study of Naïve Bayes classifier and Bayes net classifier for fault diagnosis of monoblock centrifugal pump using wavelet analysis. Applied Soft Computing,Volume 12 ,pp 2023–2029.
  25. Hemantha Kumar, T. A. Ranjit Kumar, M. Amarnath and V. Sugumaran (2012). Fault diagnosis of antifriction bearings through sound signals using support vector machine. Journal of vibro engineering, volume 14, issue 4.

2011

  1. Sakthivel G and Nagarajan G (2011). Experimental studies on the performance and emission characteristics of a diesel engine fuelled with ethyl ester of waste fish oil and its diesel blend.Society of Automotive Engineers, SAE paper no 2011-01-2402.
  2. K. Janardhan Reddy, M.Adithan and P.Radhakrishnan (2011). Development of a methodology for retrieval of similarly shaped CAD models. International Journal of Computer Applications in Technology, 40, 4, 286.
  3. R. Manimaran (2011). CFD simulation of non-Newtonian fluid flow in arterial stenoses with surface irregularities. Proceedings of World Academy of Science, Engineering and Technology,73, 957-962.
  4. BhaskaraRao. L and KameswaraRao. C (2011). Fundamental Buckling of Annular Plates with Elastically Restrained Guided Edges against Translation.Mechanics Based Design of Structures and Machines, 39 (4), 409-419.
  5. Saleel Ismail and P. S. Mehta (2011). Second Law analysis of hydrogen-air combustion in a spark ignition engine. International Journal of Hydrogen Energy, 36, 931-946.
  6. Saleel Ismail and P. S. Mehta (2011). Evaluation of the effects of fuel and combustion-related processes on exergetic efficiency. Fuel, 90, 1818-1825.
  7.  Giridharan. A and G. L. Samuel (2013), “Investigation into Energy consumption, Surface roughness and Material Removal Rate of Cylindrical Components Machined using Wire Electrical Discharge Turning Process”, International Journal of Manufacturing Technology and Management, 27(4-6), 170-185.
  8.  Senthil Kumar, M & Elayaperumal A, “Synthesis, Characterization and Sintering Behaviour Influencing Mechanical, Thermal and Physical Properties of Cordierite doped TiO2” International Journal of Materials Research and Technology, Elsevier, 269-275, 2(3), 2013.
  9.  Senthil Kumar M & Elayaperumal A, “Characterization of Cordierite And Cordierite – Zirconia Ceramic Composite Through Precipitation Technique” Proceedings in International Conference on Advances in materials processing and Characterization, 280 – 286, 6 – 8th February 2013.

Mechanical - Conference Publications

2016

Conference Publications – Year 2016

2015

  1. Albin Joseph, Deivanathan.R, “Robotic Palm Gripper”, International Conference on Advances in Mechanical and Materials Sciences(ISSRD Virtual conference), 14-15 March, 2015, San Deigo, USA.
  2. Ajinkya Kale Pravin, Nikunj Paliwal, Deivanathan.R, “ Optimization of Cycle time of MIG Wleding Robots by Offline Programming Tool”, International Conference on Emerging Trends in Engineering and Technology, 3 May 2015, Institute for Engineering Research and Publication, Chennai.
  3. Albin Joseph, Deivanathan.R, ”Design and Development of an automated tilt controller for tilting 3 wheeler”, International Conference on Emerging Trends in Engineering and Technology, 3 May 2015, Institute for Engineering Research and Publication, Chennai.
  4. Sushant Chougle, VG Sridhar & Senthil Kumar M, “Friction Stir Welding of Dissimilar Materials of Aluminium (1100) Alloy to Brass”, International Conference On Technological Convergence For Information, Health, Food and Energy Security, 1-2 May 2015.

2014

  1. T.R.Vijayaram, Rakesh K Rajan, Synthesis and characterization of coconut shell particulatereinforced epoxy polymer matrix composite,pp: 311, 2014, icmct 2014, international conference on materials and characterization techniques, 10 to 12 march 2014, organized by centre for crystal growth, school of advanced sciences, VIT, vellore, Tamil nadu,India
  2. T.R.Vijayaram, Kiran Varghese, Processing and mechanical characterization of coconut fibre reinforced epoxy polymer matrix composite, pp: 310, 2014, icmct 2014, international conference on materials and characterization techniques, 10 to 12 march 2014, organized by centre for crystal growth, school of advanced sciences, VIT, vellore, Tamil nadu,India
  3. KalyaniAbhinav, T.R.Vijayaram, Fabrication, characterization and application of ceramic steel in dentistry, pp: 172, 2014, icmct 2014, international conference on materials and characterization techniques, 10 to 12 march 2014, organized by centre for crystal growth, school of advanced sciences, VIT, vellore, Tamil nadu, India
  4. C.N.Jayapragasan,Sumedh J. Suryawanshi and K. Janardhan Reddy (2014). Design Optimization of Centrifugal Fan of Travelling Cleaner, International Conference On Trends in Product Life Cycle ,Modeling, Simulation and Synthesis,PLMSS.
  5. Donnell James, K.Janardhan Reddy and Sumedh J. Suryawanshi (2014). Conceptual Product Development of Multifunctional Product (Punch cum Stapler Tool). 1st International Conference on “Mechanical Engineering: Emerging Trends for Sustainability, ICMEETS.
  6. M.S.Phani Deep Kumar, K.Janardhan Reddy and C.N.Jayapragasan (2014). Redesign and Validation of an Industrial Blower. International Conference on Innovative Research in Engineering and Technology May 2.
  7. Amrita Shukla,RameshKannan and S.Sivarajan (2014). Assesing the impact of various parameters in the connection detailing of steel structures using design structure matrix. International Conference on Advances in Industrial Engineering Applications, ICAIEA2014.
  8. Mohammed Asif Chand, Saleel Ismail and AdarshModi (2014). Pitching moment control strategy using an active spoiler for a sedan type vehicle. SARC-ITR International Conference, Chennai, India.
  9. Feroskhan M. and Saleel Ismail (2014). Modified Otto cycle for a biogas fuelled HCCI engine. International Mechanical Engineering Congress – IMEC-2014, NIT Trichy, India.
  10. Senthil Kumar M and Elayaperumal A (2014). Characterization of Coconut Fibre Reinforced Polyester. Proceedings in National conference on Advancements and Recent Innovations in Mechanical Engineering.
  11. Ajith Gopinath, Senthil Kumar M & Elaya Perumal A, “Experimental Investigation on Mechanical Properties of Natural Fiber Reinforced Composite with Polyester and Epoxy Resin”, Journal of Procedia Engineering, Elsevier, 2052-2063, 97, 2014.
  12. P Bharath, VG Sridhar & M Senthil Kumar, “Optimization of 316 Stainless Steel Weld Joint Characteristics using Taguchi Technique”, Journal of Procedia Engineering, Elsevier, 881-891, 97, 2014.
  13. S.Sivarajan,R.Padmanabhan, Green Machining and Forming by the use of Surface coated tools(2014) Procedia Engineering 97 ( 2014 ) 15 – 21.

2013

  1. T.R.Vijayaram, Metallurgy of continuous casting technology, International conference on advances in civil, structural and mechanical engineering, Proceedings, CSM 2013, 03-04 August 2013, Organised by IRED, Institute of research engineers and doctors, Hong Kong, August 2013
  2. KiruthighaShanmugaSundaram, Davidson Jebaseelan, Rince Jose, Ranjitha Rebecca Jeevan, George Joseph, SanthoshJospeh,MohanThanikachalan (2013). A Study of Mechanical Behavior of an Encapsulated Stent Design Using Finite Element. Springer IFMBE Proceedings, Volume 493, pp391.
  3. Rince Jose, Harikrishnan S, Johanna Rajan, Davidson JD ,MohanThanikachalam (2013). Experiment Design for performing Flow Analyses Tests on an Endovascular Stent Graft Prototype. Proceedings of Indian Conference on Applied Mechanics (INCAM) 2013,IIT Madras, 4 – 6.
  4. J.SolomonRajendra, K.Janardhan Reddy, R. Padmanabhan and C P Karthikeyan(2013). Numerical simulation of flow over spoilers in passenger cars. 2nd International Conference on Mechanical, manufacturing and Building Sciences,ICAMB.
  5. Sumedh J. Suryawanshi, K. Janardhan Reddy and Donnell James (2013). Conceptual Product Development of Inbuilt Person Transfer Mechanism in Wheelchair for Lower Limb Amputees. Proceedings of the International Conference on Sustainable Innovation and Successful Product Development for a Turbulent Global market, p. 110.
  6. R. Manimaran and R. ThundilKaruppa Raj (2013). Prediction of Flame Surface Density and Emissions for Different EGR in a Direct Injection Diesel Engine using CFD. International Conference on Mathematical Computer Engineering (ICMCE-2013) , VIT Chennai, India.
  7. R. Manimaran and R. ThundilKaruppa Raj (2013). Comparison of Toroidal Combustion Chambers in a Direct Injection Diesel Engine using CFD. STAR Indian Conference 2013, Bangalore, , CD-adapco.
  8. R. Manimaran and R. ThundilKaruppa Raj (2013). CFD Analysis of Combustion and Pollutant Formation Phenomena in a Direct Injection Diesel Engine at different EGR Conditions. International Conference on Design & Manufacturing IIITDM Kanchipuram (IConDM’13).
  9. R. Manimaran and R. ThundilKaruppa Raj (2013). Numerical Investigations of Spray Droplet Parameters on Combustion and Emission Characteristics in a Direct Injection Diesel Engine using 3-Zone Extended Coherent Flame Model. Proceedings of 4th International Conference on Fluid Mechanics and Heat & Mass Transfer (FLUIDSHEAT13), Dubrovnik, Croatia.
  10. R. Manimaran and R. ThundilKaruppa Raj (2013). Numerical Investigations of Spray Droplet Parameters in a Direct Injection Diesel Engine using 3-zone Extended Coherent Flame Model. International Conference on Energy Efficient Technologies for Sustainability (ICEETS’13), Nagercoil.
  11. S.Sivarajan,U.SrinivasaRao And V.Pandyaraj (2013). Grindability evaluation of plain cemented carbides using acoustic emission signals. Proceedings of second international conference on advances in material processing and characterisation (ampc-2013) published by allied publishers pvt ltd, page no 725-734

2012

  1. K. Senthil Kumar, R. ThundilKaruppa Raj and R. Manimaran (2012). Parametric Studies Towards Homogeneous Mixture Preparation in a 4-Stroke HCCI Engine by CFD. 2nd International Conference on Advances in Mechanical, Manufacturing and building Sciences (ICAMB-2012), VIT University, Vellore, India.
  2. K. Senthil Kumar, R. ThundilKaruppa Raj and R. Manimaran (2012). Performance and emission characteristics of single Cylinder constant speed diesel engine with pongamia Methyl esters as fuel. 2nd International Conference on Advances in Mechanical, Manufacturing and building Sciences (ICAMB-2012), VIT, Vellore, India.
  3. Jafferson.JM and Hariharan. P (2014). ExperExprimental investigation on machining performance of cryogenically treated electrodes in µEDM. Proceedings of the 4th International  &  25th All India Manufacturing Technology, Design  and Research Conference  (AIMTDR 2012), vol.14-16, pp.1069-1072.

2011

  1. M.B.Shyam Kumar and S.Vengadesan (2011). Effect of flow interference between two square cylinders with rounded corners using Immersed Boundary Method. Proceedings of the 13thAeSI Annual CFD Symposium, SatishDhawan Auditorium, IISc Bangalore, Pages CP 20 (1-8).
  2. M.B.Shyam Kumar and S.Vengadesan (2011). Numerical investigation of flow interference between two square cylinders with rounded corners using immersed boundary method. Proceedings of the International Conference on Computational Fluid Dynamics, WASET, Holiday Inn Paris Montparnasse, Avenue Du Maine, Paris, France, Paper Number 231, Issue 79, Pages 1255–1262.
  3. Sakthivel, G. Nagarajan, G. Murugesan, A. Shanmugam, P Subaramaniam, D and Prakash, J (2011). Experimental investigations on the performance and emission characteristics of a diesel engine fuelled with fish oil biodiesel oxygenated by diethyl ether. 22nd National conference on I.C. engines and combustion, National Institute of Technology Calicut & Combustion Institute – Indian Section (CIIS) NIT,Calicut.
  4. R. Manimaran (2011). CFD simulation of non-Newtonian fluid flow in arterial stenoses with surface irregularities. International Conference on Fluid Mechanics, Heat Transfer and Thermodynamics, World Academy of Science, Engineering and Technology (WASET), Dubai.
  5. Saleel Ismail and P. S. Mehta (2011). Effect of exhaust gas recirculation on combustion irreversibilities and emissions. XXII National Conference on IC Engines and Combustion – NCICEC 2011, NIT Calicut, India.
  6.  R. Manimaran (2011). Comparison of different turbulence models in predicting the temperature difference in a parallel flow heat exchanger. International conference on thermal energy and environment, March 2011, Kalasalingam University, Tamilnadu.