Centre for Advanced Materials and Innovative Technologies (CAMIT)

Research - Some recent journal publications by the faculty members of the research centre

The list of selected journals in which the CAMIT research faculty have published manuscripts with VIT affiliation is given here, with their corresponding 2022 impact factors (published in June 2023).

S. NoJournal TitleImpact Factor
1Nano-Micro Letters26.6
2Journal of Energy Storage9.4
3Materials Science and Engineering: A6.4
4Measurement: Journal of the International Measurement Confederation5.6
5Building Simulation5.5
6Nanomaterials5.4
7Polymer Composites5.2
8Polymers5.0
9Materials and Manufacturing Processes4.8
10Sensors and Actuators, A: Physical4.6
11IEEE Sensors Journal4.3
12Computers and Electrical Engineering4.3
13Journal of Materials Science4.2
14Materials Science in Semiconductor Processing4.1
15IEEE Access3.9
16Journal of the Electrochemical Society3.9
17Multimedia Tools and Applications3.6
18Nanotechnology3.5
19Journal of Natural Fibers3.5
20Materials3.4
21Silicon3.4
22Micromachines3.4
23Journal of Physics D: Applied Physics3.4
24Journal of Reinforced Plastics and Composites3.1
25Materials Letters3
26Optical and Quantum Electronics3.0
27Journal of Composite Materials2.9
28Advanced Composite Materials2.9
29Pramana2.8
30Archive of Applied Mechanics2.8
31Proceedings of Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture2.6
32Aerospace2.6
33Applied Physics A2.3
34Journal of Micromechanics and Microengineering2.3
35Chemistry Select2.1

The details of research manuscripts published by the faculty members of the research group in peer-reviewed, Clarivate-indexed, and/or Scopus-indexed journals are provided hereunder.

2024: Total Publications=44 (Q1=08; Q2=32; Q3=03)

  1. Arunkumar, K., Ramraji, K., Venkatachalam, G., Rajesh, M. and Karthik, K., 2024, Influences of basalt fiber position and addition on the mechanical and viscoelastic behaviors of steel mesh/flax/basalt fiber metal laminates, Iranian Polymer Journal, https://doi.org/10.1007/s13726-024-01437-z. (Q2)
  2. T. Ranjith Kumar and G. Lakshmi Priya, “Ultra-sensitive dengue NS1 protein detection via asymmetric source-drain, heterojunction and dual-dielectric cavities in a uniform tunnel FET biosensor,” Results in Engineering, vol. 24, December. 2024, 103318, doi: 10.1016/j.rineng.2024.103318. (WoS/ESCI, Impact Factor – 6.0). (Q2)
  3. Adam, M., & Rajendrakumar, K. (2024). Performance Enhancement of Areca Sheath Fiber Reinforced Epoxy Composites: Structural Optimization with Polybutylene Terephthalate Monofilaments. Journal of Natural Fibers, 22(1). https://doi.org/10.1080/15440478.2024.2440781. (Q2)
  4. Nadeem, M., Betrico, N.H., Devarajalu, R.P., Venkatachalam, G., Vignesh, P., Reddy, D.M. and Velu, S.P., 2024, Virtual Fatigue Life Prediction of Cellulose Microfibrils Reinforced Polymer Composite Article, Brazilian Archives of Biology and Technology, Vol.67: e24240029, https://doi.org/10.1590/1678-4324-2024240029. (Q2)
  5. Vinayak, S.H., Reddy, D.M., SathishKumar, P., Reddy, R.M., Suchart, S. and Venkatachalam, G., 2024, Analysis on the effect of sodium hydroxide treatment and graphene nano-particle reinforcement on the shear behavior and modal analysis of glass fibre reinforced polymer flat-joggle-flat composite joints, Polymer Composites, DOI:10.1002/pc.29306. (Q1)
  6. M Manikandan, K A Karthigeyan, E Papanasam and E Manikandan, ZnMnCoS/rGO nanocomposite for an effective bifunctional electrode for overall water splitting and supercapacitor applications, Physica Scripta Vol.99, Issue 12. pp.125987. ((Q2)
  7. Bhuvaneswari Selvaraj, Lakshmi Priya G, and Selva Balasubramanian, “Harnessing the UiO-67 metal–organic framework for advanced detection of cadmium ions in water bodies,” RSC Advances, Nov. 2024, vol.14, 35618-35627, doi: 10.1039/D4RA06811D. (Q2)
  8. ShenbagaVelu, P., Ajay, M.P., Bindu, S.B., Venkatachalam, G., Aravindh, S., and Loganathan, T.G., 2024, Comparison studies on acoustic behaviour of natural fibre-reinforced polymer matrix composites, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, DOI: 10.1177/09544089241282482. (Q2)
  9. Hemalatha, C.K., Venkatachalam, G. and Bhuvaneshwari, M., 2024, Optimizing dielectric constant of noncommercial biobased fibres – Acacia Nilotica, Acacia Leucophloea and Prosopis juliflora – For composite applications with selected fillers, Heliyon, https://doi.org/10.1016/j.heliyon.2024.e38231. (Q1)
  10. Suresh, T., Venkatachalam, G. and Elango M., 2024, Optimizing Dielectric Constants of Epoxy Composites Infused with Palmyra Palm and Nano Fillers using Response Surface Methodology, Heliyon, https://doi.org/10.1016/j.heliyon.2024.e39657. (Q1)
  11. Venkatachalam, G., Hitesh, B.N., Mitai, M., Vignesh, P., Jeyanthi, S. and Aravindh, S., 2024, Design and analysis of gear made from natural fiber reinforced polymer matrix composite, Advances in Computational Design, Vol. 9 (4), pp 269-283, https://doi.org/10.12989/acd.2024.9.4.269. (Q2)
  12. Arumugam Ramu, Kannapiran Rajendrakumar, 2024, Evaluation of the Role of Cu(PMDETA)}2(O22–) 2+ in Open-Air Photo ATRP of Methyl Methacrylate, ACS Omega, https://doi.org/10.1021/acsomega.4c02773. (Q2)
  13. Manikandan, M., Prasankumar, T., Manikandan,  E. Papanasam,  K. Ramesh & S. Ramesh . Hydrothermal synthesis of rGO and MnCoS composite for enhanced supercapacitor application. Scientific Reports 14, 25596 (2024). (IF:3.8, International Collaboration). (Q1)
  14. Inbarani, J., Manikandan, E. Narrowband Frequency-Selective Surface on 3D-Printed Substrate for X-Band Applications. J. Electron. Mater. (2024). https://doi.org/10.1007/s11664-024-11526-7. (IF: 2.2) (Q2)
  15. Meenaakumari M, Shoba S, Manikandan E, Karthigeyan KA, Nithyapriyan SA, Meikeerthivasan V, Hemeshwar S. Optical parameters extraction of soil and its microplastics contamination using terahertz spectroscopy. Heliyon. 2024 Sep 29;10(19):e38326. doi: 10.1016/j.heliyon.2024.e38326. PMID: 39403508; PMCID: PMC11471470. (Q2)
  16. Venkatachalam, G., Aravindh, S., Mark, M.P., Velu, S.P., Bharathraj, K.B., Varghese, A.K., Viswanath, P.S., Ramakrishnan, R. and Selvaraj, M., 2024, Investigation of mechanical characteristics of coir fibre/hexagonal boron nitride reinforced polymer composite, Material Research Express, Vol. 10 (2023), 125302, https://doi.org/10.1088/2053-1591/ad176c. (Q2)
  17. Lakshmi Narayana, S. and Venkatachalam, G., 2024, Interlaminar shear and impact properties of particle reinforced jute fiber/epoxy hybrid composites, Journal of Reinforced Plastics and Composites, DOI: 10.1177/07316844241239470. (Q2)
  18. Velu, P.S., Sivakumar, M., Aravindh, S. and Venkatachalam, G., 2024, Investigation into the mechanical and thermal properties of coir fibre reinforced PVC composites using RSM based different algorithm techniques, Biomass Conversion and Biorefinery, https://doi.org/10.1007/s13399-024-05542-0. (Q2)
  19. Vimalanand, S., Velu, S.P., Venkatachalam, G., Muthukumaran, G., Anandhan, V. and Anish, S., 2024, MULTI-OBJECTIVE OPTIMIZATION OF THE PROCESS PARAMETERS USING HYBRID TAGUCHI-GREY RELATIONAL ANALYSIS OF BASALT/JUTE FIBER-REINFORCED COMPOSITES, Composites: Mechanics, Computations, Applications: An International Journal, Vol. 15(3), pp 87–101, DOI: 10.1615/CompMechComputApplIntJ.2024050053. (Q2)
  20. Venkatachalam, G.,Jeevalknat, D., Sanjog, M., Loganathan, T.G., Vignesh, P., and Aravindh, S., 2024, IMPACT STRENGTH OF COIR FIBER/BORON NITRIDE/FLY ASH FORTIFIED EPOXY COMPOSITE, Mechanics of Composite Materials, Vol. 60 (2), pp 353-362, DOI 10.1007/s11029-024-10191-5. (Q2)
  21. Ramraji, K., Dinesh, R.S., Velu, P.S., Venkatachalam, G. and Aravindh, S., 2024, Development of hBN/natural fibres reinforced polymer composites using grey relation grade analysis for thermal and electrical applications, Functional Composites and Structures, Vol. 6, (2024) 025002, https://doi.org/10.1088/2631-6331/ad3edd. (Q2)
  22. Vimalanand, S., Ajithkumar, S., Venkatachalam, G., Vignesh, P., Aravindh, S., Pandivelan, C., Vinoth, K. K., Velu, S. P., Balamurugan, K. and Rajendiran, G., 2024, Tensile properties of basalt/jute fiber reinforced epoxy composite, Cogent Engineering, 11:1, 2348083, https://doi.org/10.1080/23311916.2024.2348083. (Q2)
  23. Satonkar, N., Venkatachalam, G. and Pitchumani, S.V., 2024, Finite Element Analysis of Electromagnetic Forming Process and Optimization of Process Parameters using RSM, Mathematics, 12, 1622, https://doi.org/10.3390/math12111622. (Q2)
  24. Suresh, T., Elango, M., Venkatachalam, G. and ShenbagaVelu, P.,2024, Areca Fiber Reinforced Bio-Materials: A Review on Processing, Properties and Advanced Optimization Technique, Journal of Natural Fibers, Vol.21 (1), 2357236, DOI: 10.1080/15440478.2024.2357236. (Q2)
  25. VIGNESH, N.J., SHENBAGAVELU, P., HYNES, N.R.J., SUBRAMANIAN, S.K., SREEDHARAN, M., TAMILZHARASAN, C. and VENKATACHALAM, G., 2024, ENHANCING AA5083/MgAZ31B PROPERTIES VIA FRICTION STIR WELDING, Surface Review and Letters, 2450128, DOI: 10.1142/S0218625X24501282. (Q3)
  26. ShenbagaVelu, P., Vimalanand, S., Venkatachalam, G., Loganathan, T.G., Kulasekaran, N., and Aravindh, S., 2024, Mechanical and vibration characteristics of hybrid natural fibre-reinforced composite using taguchi grey relational analysis, Engineering Research Express, Vol. 6 (2), 025566, https://doi.org/10.1088/2631-8695/ad5640. (Q2)
  27. Suresh, T., Ayyappan, S., Shenbaga Velu, P., Venkatachalam, G. and Elango, M., 2024, Evaluation of surface response of SiC and fly ash filled Prosopis juliflora fibre reinforced epoxy composites under dry sliding wear conditions using Taguchi method, Journal of Engineering and Applied Science, Vol. 17, 157, https://doi.org/10.1186/s44147-024-00485-9. (Q2)
  28. ShenbagaVelu, P., Arunkumar, G., Venkatachalam, G., Neelanarayanan, V. and Guru, A., 2024, Effect of algorithm techniques on optimization of laminate stacking sequence for buckling load condition, International Journal on Interactive Design and Manufacturing, https://doi.org/10.1007/s12008-024-02041-4. (Q2)
  29. Ramraji, K., Salunke, D.R., Shenbaga Velu, P., Venkatachalam, G. and Aravindh, S., 2024, Investigation of nano-hBN/ natural fibers reinforced epoxy composites for thermal and electrical applications using GRA and ANFIS optimization methods, Polymer Testing, https://doi.org/10.1016/j.polymertesting.2024.108561. (Q1)
  30. Loganathan, T.G., Vinoth Kumar, K., Balasubramanian, M., Venkatachalam, G., Hasan, S.A.B. and Krishnabharathi, A.B., 2024, Ensuring the potential of Caryota urens fruit stem fibre as biodegradable reinforcement for polymer composite structural applications, Biomass Conversion and Biorefinery, https://doi.org/10.1007/s13399-024-06111-1. (Q2)
  31. Ramraji, K., ThirumalSelvan, T., Suresh, T., ShenbagaVelu, P. and Venkatachalam, G., 2024, Mechanical properties of seaweed/banana fiber/hBN filled epoxy composites using Box–Behnken method, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, DOI: 10.1177/09544089241282062. (Q2)
  32. Venkatachalam G., Hemanth V., Logesh M., Piyush A., Siva kumar M., Pragasam V., Loganathan T.G., Investigation of Tensile Behavior of Carbon Nanotube/Coir Fiber/Fly Ash Reinforced Epoxy Polymer Matrix Composite, Journal of Natural Fibers, Vol:20, Issue: 1, DOI: 10.1080/15440478.2022.2148151.(Q2)
  33. Agarwal L., Priya G.L., Papnassam E., Kumar B.P., Venkatesh M., A Novel Metal Dielectric Metal Based GAA-Junction-Less TFET Structure for Low Loss SRAM Design, Silicon, DOI: 10.1007/s12633-022-02218-0. (Q2)
  34. Sahu, O.P., Karmakar, M. Disposable culture, posthuman affect, and artificial human in Kazuo Ishiguro’s Klara and the Sun (2021). AI & Soc 39, 1349–1357 (2024). https://doi.org/10.1007/s00146-022-01600-1. (Q1)
  35. Percy Sephra J., Tharini C., Abhay Sachdev, Manikandan E., An efficient sensing system using ion-selective membrane on Ni2O3/rGO nanocomposite for electrochemical detection of nitrate ions. Journal of Alloys and Compounds, Vol:980, DOI: 10.1016/j.jallcom.2023.173414. (Q1)
  36. Manikandan M., Manikandan E., Swetha V., Kurpaa S., Vijay S., Kiruthika V., Nickel-copper-cobalt mixed oxide electrode material for high performance asymmetric supercapacitor. Scientific Reports, Vol:14, Issue: 1, DOI: 10.1038/s41598-024-61625-y. (Q1)
  37. Salim, Evan & Kudhur, Azzam & Kara, Ilker & Azzahrani, Ahmad & Fakhri, Makram & Alsultany, Forat & Basem, Ali & Manikandan, E.. (2024). Improved Physical Properties of Ag-Cu2O Hybrid Structure Prepared Using Laser Ablation in Liquid Technique. Plasmonics. 1-15. 10.1007/s11468-024-02375-5. (Q3)
  38. Manikandan M., Priya G.L., Manikandan E., Sethumadhavan V., ZnO Nanoparticle-Enhanced Electrochemical Sensor Utilizing Moringa Oleifera Leaf Extract for Real-Time Dopamine Detection, Journal of Inorganic and Organometallic Polymers and Materials, DOI: 10.1007/s10904-023-02955-8. (Q2)
  39. Inbarani J., Manikandan E., Comparative analysis of X-band FSS fabricated by inkjet printing and conventional etching technique, Microwave and Optical Technology Letters, Vol:66, Issue: 2, DOI: 10.1002/mop.34080. (Q3)
  40. Sundari M.P.; Priya G.L., Nano-biosensors with subthreshold swing tunnel field effect transistor: A cutting-edge review, Sensing and Bio-Sensing Research, Vol:44, DOI: 10.1016/j.sbsr.2024.100665. (Q2)
  41. Raman S., Meena K.V., Vetrivel S., Sankar A R., Silicon nanowire piezoresistor and its applications: a review, Nanotechnology, Vol:35, Issue: 36, DOI: 10.1088/1361-6528/ad555e. (Q2)
  42. Thirupathi S.; Mallichetty E.; Gopalan V.; Velu Pitchumani S., Areca Fiber Reinforced Bio-Materials: A Review on Processing, Properties and Advanced Optimization Technique, Journal of Natural Fibers, Vol:21, Issue: 1, DOI: 10.1080/15440478.2024.2357236. (Q2)

Raman S.; Ravi Sankar A., Recent progress in 2D textile-based piezoresistive strain and pressure sensors, Journal of Micromechanics and Microengineering, Vol:34, Issue: 8, DOI: 10.1088/1361-6439/ad5cfd. (Q2)

2023:

  1. Venkatachalam G., Hemanth V., Logesh M., Piyush A., Siva kumar M., Pragasam V., Loganathan T.G., Investigation of Tensile Behavior of Carbon Nanotube/Coir Fiber/Fly Ash Reinforced Epoxy Polymer Matrix Composite, Journal of Natural Fibers, Vol:20, Issue: 1, DOI: 10.1080/15440478.2022.2148151
  2. Agarwal L., Priya G.L., Papnassam E., Kumar B.P., Venkatesh M., A Novel Metal Dielectric Metal Based GAA-Junction-Less TFET Structure for Low Loss SRAM Design, Silicon, DOI: 10.1007/s12633-022-02218-0
  3. Manikandan M.; Kulurumotlakatla D.K.; Manikandan E.; Karthigeyan K.A.; Al-Kahtani A.A., Hydrothermal synthesis of rGO/ZnCoS composite for high performance asymmetric supercapacitor and HER applications, Journal of Energy Storage, Vol:72, DOI: 10.1016/j.est.2023.108769
  4. Priya G.L., Rawat N., Sanagavarapu A., Venkatesh M., Andrew Roobert A., Hybrid Silicon Substrate FinFET-Metal Insulator Metal (MIM) Memristor Based Sense Amplifier Design for the Non-Volatile SRAM Cell, Micromachines, Vol:14, Issue: 2, DOI: 10.3390/mi14020232
  5. Lakshmi Narayana S., Gopalan V., Mechanical characterization of particle reinforced jute fiber composite and development of hybrid Grey-ANFIS predictive model, Journal of Natural Fibers, Vol:20, Issue: 1, DOI: 10.1080/15440478.2023.2167033
  6. Manikandan E., Karthigeyan K.A., Arivarasi A., Papanasam E., High-Q and FOM Dual-Band Polarization Dependent Ultra-Narrowband Terahertz Metamaterial Sensor, IEEE Photonics Journal, Vol:15, Issue: 1, DOI: 10.1109/JPHOT.2023.3234074
  7. Satonkar N., Gopalan V., Simulation of Electromagnetic Forming Process and Optimization of Geometric Parameters of Perforated Al Sheet Using RSM, Mathematics, Vol:11, Issue: 9, DOI: 10.3390/math11091983
  8. Joshi V., Noronha W., Vinayagamurthy G., Sivakumar R., Rajasekarababu K.B., Determination of Optimum Outlet Slit Thickness and Outlet Angle for the Bladeless Fan Using the CFD Approach, Energies, Vol:16, Issue: 4, DOI: 10.3390/en16041633
  9. Lakshmi Priya G.; Baskar C.; Deshmane S.S.; Adithya C.; Das S., Revolutionizing Holy-Basil Cultivation with AI – Enabled Hydroponics System, IEEE Access, Pg.No:(1-1), DOI: 10.1109/ACCESS.2023.3300912
  10. Muralidharan N.D.; Subramanian J.; Rajamanickam S.K.; Gopalan V., An experimental investigation of flame retardancy and thermal stability of treated and untreated kenaf fiber reinforced epoxy composites, Journal of Polymer Engineering, DOI: 10.1515/polyeng-2023-0128
  11. Tharini C.; Iyappan G.; Manikandan E.; Sephra P.J., Potentiometric sensing of potassium ion (K+) using valinomycin supported on ZnO/rGO nanocomposites, Journal of Materials Science: Materials in Electronics, Vol:34, Issue: 19, DOI: 10.1007/s10854-023-10806-y
  12. Anbalagan A.; Sundarsingh E.F.; Ramalingam V.S.; Kapileshvar A.P.; Subramaniam K.; Mohammed Abraar A.; Smart Dynamic Position Tracking Wearable for Geofencing in Marine environment, Manikandan E., IEEE Transactions on Instrumentation and Measurement, Pg.No:(1-1), DOI: 10.1109/TIM.2023.3311076
  13. Gopalan V.; Suthenthiraveerappa V.; Govindaraman L.T.; Senthilvelan S.; Ramu C.V., PREDICTION OF VIRTUAL FATIGUE PARAMETERS OF FLY ASH, BORON NITRIDE, AND SUGARCANE FIBER-REINFORCED EPOXY COMPOSITE, Composites: Mechanics, Computations, Applications, Vol:14, Issue: 4, Pg.No:(31-48), DOI: 10.1615/CompMechComputApplIntJ.2023044538
  14. Aravindh S.; Gopalan V., Investigation of electrical resistance on coir fiber reinforced P-polyvinyl chloride composites, International Journal of Polymer Analysis and Characterization, Vol:28, Issue: 5, Pg.No:(493-508), DOI: 10.1080/1023666X.2023.2250616
  15. Esakki P., Kumar P., Esakki M., Venkatesh A., Improved Dielectrically Modulated Quad Gate Schottky Barrier MOSFET Biosensor, Micromachines, Vol:14, Issue: 3, DOI: 10.3390/mi14030685
  16. Manikandan M.; Manikandan E.; Alshgari R.A.; Karami A.M.; Ahmad A., NiTe Magnetic Semiconductor Nanorods for Optical Limiting and Hydrogen Peroxide Sensor, Journal of Inorganic and Organometallic Polymers and Materials, DOI: 10.1007/s10904-023-02565-4
  17. Abishek E., Subramaniam R., Ramanujam P., Esakkimuthu M., Low-profile Circularly Polarized Conformal Antenna Array with Side Lobe Suppression for Vehicular SATCOM Applications, Applied Computational Electromagnetics Society Journal, Vol:38, Issue: 6, Pg.No:(439-447), DOI: 10.13052/2023.ACES.J.380608
  18. Venkatachalam G., Jayanthi U., Suja A., Gnanaaksaya S., Aravindh S., Velu P.S., Balamurugan K., Gopal R., Virtual Fatigue Behaviour Analysis of Coir Fibre-Reinforced PVC Composites, International Journal of Polymer Science, Vol:2023, DOI: 10.1155/2023/6685837
  19. Venkatachalam G., Aravindh S., Mark M.P., Shenbaga Velu P., Bharathraj K.B., Varghese A.K., Subramani V.P., Ramakrishnan R., Manickam S., Investigation of mechanical characteristics of coir fibre/hexagonal boron nitride reinforced polymer composite, Materials Research Express, Vol:10, Issue: 12, DOI: 10.1088/2053-1591/ad176c
  20. Gopalan V., Rajarajan S., Wilson M., Venkatesan J., Elango M., Natarajan S., Rajakumar S., Studies on fly ash/coir/sugarcane reinforced epoxy polymer matrix composite, Materialwissenschaft und Werkstofftechnik (Materials Science and Engineering Technology), Vol:54, Issue: 2, Pg.No:(215-228), DOI: 10.1002/mawe.202200037
  21. Priya G.L., Saran P., Padhy S.K., Agarwal P., Andrew Roobert A., Julus L.J., Novel Low Power Cross-Coupled FET-Based Sense Amplifier Design for High-Speed SRAM Circuits, Micromachines, Vol:14, Issue: 3, DOI: 10.3390/mi14030581
  22. Gopalan V., Vardhan M.S., Thakur V., Krishnamoorthy A., Pragasam V., Degalahal M.R., Velu P.S., Raja Annamalai A., Jen C.-P., Studies on Numerical Buckling Analysis of Cellulose Microfibrils Reinforced Polymer Composites, Materials, Vol:16, Issue: 3, DOI: 10.3390/ma16030894
  23. Lanka S.S., Borah K., Gopalan V., Prakasam V., Mannayee G., Computational Buckling Analysis of Epoxy-Based Composite Reinforced with Sugarcane Fiber, Fly-Ash, and Carbon Nanotube, Brazilian Archives of Biology and Technology, Vol:66, DOI: 10.1590/1678-4324-2023220280
  24. Raman S., A R.S., M S., Advances in silicon nanowire applications in energy generation, storage, sensing, and electronics: a review, Nanotechnology, Vol:34, Issue: 18, DOI: 10.1088/1361-6528/acb320
  25. Raju A., Samanta D., Rajendrakumar K., ChemistrySelect, A Review of Recent Advances in the Development of Superhydrophobicity over Various Substrate Surfaces Using Polymers, Vol:8, Issue: 17, DOI: 10.1002/slct.202204262
  26. G. Lakshmi Priya, C. Baskar, S. S. Deshmane, C. Adithya and S. Das, “Revolutionizing Holy-Basil Cultivation with AI – Enabled Hydroponics System,” in IEEE Access, DOI: 10.1109/ACCESS.2023.3300912. (ISSN: 2169-3536) (Impact Factor – 3.9)
  27. G. Lakshmi Priya, Puneet Saran, Shikhar Kumar Padhy, Prateek Agarwal, A. Andrew Roobert, and L. Jerart Julus. 2023. “Novel Low Power Cross-Coupled FET-Based Sense Amplifier Design for High-Speed SRAM Circuits” Micromachines 14, no. 3: 581. DOI: 10.3390/mi14030581 (ISSN: 2072-666X) (Impact Factor – 3.523)
  28. G. Lakshmi Priya, M Venkatesh, A Andrew Roobert, Namita Rawat and S. Abhishek, “Hybrid Silicon Substrate FinFET-Metal Insulator Metal (MIM) Memristor Based Sense Amplifier Design for the Non-Volatile SRAM Cell”, Micromachines (MDPI) 2023, Vol. 14, No. 2, pp 232; DOI: 10.3390/mi14020232 (ISSN: 2072-666X) (Impact Factor – 3.523)”
  29. R. Srinivasan, A. Ravi Sankar, and M. Sindhuja, “Advances in silicon nanowire applications in energy generation, storage, sensing, and electronics: A review,” Nanotechnology, 34, 182001, 2023. Impact factor: 3.5
  30. Santhoshkumar M, A. Ravi Sankar, Sonal Singh, Puneet Sharma, “Enhanced X-band absorption and shielding performance of Gd-substituted barium hexaferrite,” Journal of Alloys and Compounds, 959, 170456, 2023.  Impact factor: 6.2
  31. Lavanya J, A Ravi Sankar, Santhoshkumar M, “Surfactant-assisted hydrothermal synthesis of large surface area nickel nanoparticles for electrochemical applications,” Materials Letters, 346, 134527, 2023. Impact factor: 3
  32. Tharini, C., Iyappan, G., Manikandan, E and J Percy, “Potentiometric sensing of potassium ion (K+) using valinomycin supported on ZnO/rGO nanocomposites”. Journal of Materials Science: Materials in Electronics, 34, 1474, 2023, Impact Factor: 2,8
  33. Esakki, Papanasam, Prashanth Kumar, Manikandan Esakki, and Adithya Venkatesh. 2023. “”Improved Dielectrically Modulated Quad Gate Schottky Barrier MOSFET Biosensor”” Micromachines 14, no. 3: 685, 2023, Impact Factor: 3.4
  34. Manikandan, M., Manikandan, E., Alshgari, R.A. et al. NiTe Magnetic Semiconductor Nanorods for Optical Limiting and Hydrogen Peroxide Sensor. J Inorg Organomet Polym 33, 1538–1547, 2023, Impact factor: 4.0
  35. E. Manikandan, K. A. Karthigeyan, A. Arivarasi and E. Papanasam, “High-Q and FOM Dual-Band Polarization Dependent Ultra-Narrowband Terahertz Metamaterial Sensor,” in IEEE Photonics Journal, vol. 15, no. 1, pp. 1-6, Feb. 2023, Impact Factor: 2.4
  36. Aleena Raju, Debasis Samanta,  Kannapiran Rajendrakumar, A review of recent advances in the development of superhydrophobicity over various substrate surfaces using polymers.  Chemistry Select, 2023, 8(17), e202204262, Impact Factor: 2.307
  37. Venkatachalam G., Hemanth V., Logesh M., Arora P., Siva kumar M., Vignesh P. and Loganathan T.G., Investigation of Tensile Behavior of Carbon Nanotube/Coir Fiber/ Fly Ash Reinforced Epoxy Polymer Matrix Composite, JOURNAL OF NATURAL FIBERS, Vol. 20 (1), 2023, https://doi.org/10.1080/15440478.2022.2148151. Impact factor: 3.5
  38. Venkatachalam G., Vardhan M.S., Thakur V., Annamalai K., Vignesh P., Reddy M.D., Velu P.S., Raja Annamalai A. and Jen C.P., Studies on Numerical Buckling Analysis of Cellulose Microfibrils Reinforced Polymer Composites, Materials, Vol. 16 (894), 2023, https://doi.org/10.3390/ma16030894. Impact factor: 3.4
  39. Lakshmi Narayana, S. and Venkatachalam, G., Mechanical characterization of particle reinforced jute fiber composite and development of hybrid Grey-ANFIS predictive model, Journal of Natural Fibers, Vol.20 (1), 2167033, 2023, DOI: 10.1080/15440478.2023.2167033. Impact factor: 3.5
  40. Venkatachalam, G., Siddharth, R., Mohith, W., Jaisuriya, V., Elango, M., Senthilnathan, N. and Rajakumar, S., Studies on fly ash/coir/sugarcane reinforced epoxy polymer matrix composite, materialwissenschaft und werkstofftechnik (Materials Science & Engineering Technology), Vol. 54 (2), pp 215-228, 2023, DOI: 10.1002/mawe.202200037. Impact factor: 1.1
  41. Nilesh, S. and Venkatachalam, G., Simulation of Electromagnetic Forming Process and Optimization of Geometric Parameters of Perforated Al Sheet Using RSM, Mathematics, Vol. 11 (9), 1983, 2023, https://doi.org/10.3390/math11091983. Impact factor: 2.4
  42. Venkatachalam G., Vimalanand S., Loganathan T.G., Srinath S. and Chandrasekkaran V.R., PREDICTION OF VIRTUAL FATIGUE PARAMETERS OF FLY ASH, BORON NITRIDE, AND SUGARCANE FIBER-REINFORCED EPOXY COMPOSITE, Composites: Mechanics, Computations, Applications: An International Journal, Vol. 14 (4), pp 31-48, 2023, DOI: 10.1615/CompMechComputApplIntJ.2023044538. Impact factor: 0.2
  43. Aravindh, S. and Venkatachalam, G., Investigations on Dielectric Constant of Coir Powder-Reinforced PVC Composites, Journal of Natural Fibers, Vol.20 (2), 2239501, 2023, https://doi.org/10.1080/15440478.2023.2239501. Impact factor: 3.5
  44. Joshi V., Noronha W., Vinayagamurthy G., Sivakumar R., Rajasekarababu K.B., Determination of Optimum Outlet Slit Thickness and Outlet Angle for the Bladeless Fan Using the CFD Approach, Vol:16, Issue: 4, Energies, DOI: 10.3390/en16041633, IF 3.252 
  45. Krishnaraj A., Ganesan V., Influence of slot profiles on the characteristics of jets, Aircraft Engineering and Aerospace Technology, DOI: 10.1108/AEAT-02-2022-0032 , IF 1.478

2022:

  1. B. Rajasekarababu and G. Vinayagamurthy, S. Selvirajan, “Evaluation of CFD URANS Turbulence Models for the Building under Environmental Wind Flow with Experimental Validation”, Journal of Applied Fluid Mechanics, Vol. 15, No. 5, pp. 1387-1401, 2022.
  2. Anusindhiya K, Vinayagamurthy G, Influence of slot profiles on the characteristics of jets, Aircraft Engineering and Aerospace Technology, 2022, https://doi.10.1108/AEAT-02-2022-0032
  3. Deepa, S., Ramu, A., Rajendrakumar, K., Natural catalyst for luminol chemiluminescence: application to validate peroxide levels in commercial hair dyes., Luminescence, 37( 4), 558, 2022.
  4. Saranya and A. Ravi Sankar, “Fabrication of micro-mechanical planar cantilever beam-mass structures on quartz substrates using an ECDM process,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engg. Manufacture, 236 (6-7):668-679, 2022.
  5. V. Varsha, Gomathi Nageswaran, J. Lavanya, and A. Ravi Sankar, “Review-Recent advances in metal-organic framework derived carbon materials for electrocatalytic applications,” Journal of the Electrochemical Society, 169, 036503, 2022.
  6. Lavanya, R. Srinivasan, A. Ravi Sankar, M. V. Varsha, and Gomathi N,“ Review—Metal-Organic Frameworks Composites for Electrochemical Detection of Heavy Metal Ions in Aqueous Medium,” Journal of the Electrochemical Society, 169, 047525, 2022.
  7. Srinivasan and A. Ravi Sankar, “Silver Nanowires in Stretchable Resistive Strain Sensors,” Nanomaterials, 12 (11), 1-27, 2022.
  8. Srinivasan and A. Ravi Sankar, “Intrinsically conducting polymers in flexible and stretchable resistive strain sensors – A Review,” Journal of Materials Science, 57, 13152–13178, 2022.
  9. V. Meena, Ribu Mathew, and A. Ravi Sankar, “A Numerical Modeling Approach to Estimate the Piezoresistance of Diffused Resistors with Experimental Validation,” Journal of Micromechanics and Microengineering – 32 095008, 2022.
  10. Saranya Sambathkumar and Ravi Sankar Arunagiri Nathan, “A Simple Technique for the Precise Establishment of the Working Gap in an Electrochemical Discharge Machining Process and Some Experimental Results Thereof,” Micromachines, – 13 (9), 1367,
  11. Varsha M Vijayan, Lavanya Jothi, A Ravi Sankar, Gomathi Nageswaran, “Recent advances in the electrochemical sensing of lung cancer biomarkers,” Biosensors and Bioelectronics: X, 12, 100235, 2022.
  12. Vetrivel, B. Anupama Menon, Ribu Mathew & A. Ravi Sankar, Influence of the Flexure Position and a Thick Gold Film on the Performance of Beam-Mass Structures,IETE Journal of Research,68:1,690-702, 2022.
  13. Esakkimuthu Manikandan, Jothinayagam I, Arumugam K, Pravin SC, Jewariya M, “Flexible and Polarization Independent Miniaturized Double-Band/Broadband Tunable Metamaterial Terahertz Filter”, Materials. Vol. 15(22), pp.8174, 2022.
  14. Latha, Sheena Christabel Pravin, J. Saranya, E. Manikandan, “Ensemble super learner based genotoxicity prediction of multi-walled carbon nanotubes”, Computational Toxicology, Vol. 24, pp. 100244, 2022.
  15. Elakkiay, K. A. Karthigeyan, E. Manikandan, S. Radha, “Terahertz seventeen-band metamaterial absorber based on sunflower-typed structure”, Journal of Optoelectronics and Advanced Materials Vol. 24, Iss. 9-10, pp. 426-432, 2022.
  16. Papanasam E, Prashanth Kumar B, Chanthini B, E. Manikandan & Lucky Agarwal, “A Comprehensive Review of Recent Progress, Prospect and Challenges of Silicon Carbide and its Applications” Silicon, 2022. https://doi.org/10.1007/s12633-022-01998-9.
  17. Karthigeyan, A., Radha, S., Manikandan, E, “Single event transient mitigation techniques for a cross-coupled LC oscillator, including a single-event transient hardened CMOS LC-VCO circuit”, IET Circuits Devices Syst. Vol. 16( 2), pp. 178– 188, 2022.
  18. Karthigeyan, K.A., Radha, S. & Manikandan, E, “Polarisation-insensitive and broadband band-stop metamaterial filter for THz waves”, Pramana – J Phys, Vol.96, pp. 65, 2022.
  19. Agarwal, G. Lakshmi Priya, E. Papnassam, B. Prashanth Kumar and M. Venkatesh, “A Novel Metal Dielectric Metal Based GAA-Junction-Less TFET Structure for Low Loss SRAM Design”, Silicon, 2022, https://doi.org/10.1007/s12633-022-02218-0
  20. Lakshmi Priya M. Venkatesh, Lucky Agarwal, and T. S. Arun Samuel, “Modeling and Performance analysis of Nanocavity Embedded Dopingless T‑shaped Tunnel FET with high‑K gate dielectric for biosensing applications”, Applied Physics A: Materials Science and Processing, 128, 952, 2022.
  21. Lakshmi Priya, Namita Rawat, S.Abhishek and M.Venkatesh, “Modeling and Simulation of Double Gate Dielectric Stack Silicon Substrate Memristor Circuits for Low Power Applications”, Silicon, 2022, https://doi.org/10.1007/s12633-022-01944-9
  22. Venish Kumar, M.Venkatesh, M. Muthupandian and G.Lakshmi Priya, “Charge Density Based Small Signal Modeling for InSb/AlInSb Asymmetric Double Gate Silicon Substrate HEMT for High Frequency Applications”, Silicon, 14, pp 6009–6018, 2022.
  23. Sahu, O.P., Karmakar, M. Disposable culture, posthuman affect, and artificial human in Kazuo Ishiguro’s Klara and the Sun (2021). AI & Soc (2022). https://doi.org/10.1007/s00146-022-01600-1
  24. Pradhyumn B., Rohit O.P., Omkar A.N., Venkatachalam G., Vignesh P. and Dinesh R.S., Investigations on tensile and flexural behaviors of sugarcane fiber/boron nitride/fly ash reinforced polymer matrix composite, Polymer composites, Vol. 43 (3), pp 1730-1741, DOI: 10.1002/pc.26492, 2022.
  25. Anirudh V.P., Ajay S.A.K., Akshat A., Venkatachalam G. and Loganathan T.G., Virtual fatigue analysis of epoxy based composite reinforced with sugarcane fibre, fly ash and carbon nano tubes, materialwissenschaft und werkstofftechnik (Materials Science & Engineering Technology), Vol. 53 (1), pp 56-67, 2022.
  26. Arora, P. and Venkatachalam, G., Design and Simulation of an FSAE Impact Attenuator, SAE International Journal of Materials and Manufacturing, 15(3), 2022, https://doi.org/10.4271/05-15-03-0018.
  27. Patil S., Reddy, D.M., Naveen, J.B., Swamy, S.S., Vignesh, P. and Venkatachalam, G., Low-Velocity Impact and Compression after Impact Properties of Hemp and Jute Fiber Reinforced Epoxy Composites, Journal of Natural Fibers, Vol.19 (15), pp 12309-12324, 2022.
  28. Vadivel K.L., Sundararaman K.A., Iyahraja S., Vignesh K.D., Venkatachalam G. and Piyush A., Investigations on Mechanical and Morphological Characteristics of Mudar Fiber Reinforced Polymer Composites, Journal of Natural Fibers, 2022, https://doi.org/10.1080/15440478.2022.2068105, 2022.
  29. Jeyanthi S., Nivedhitha D., Venkatachalam G., Singh R. and Sangwan G., An Experimental Investigation and Optimization of Electromagnetic Interference Shielding Effectiveness of Hybrid Epoxy Nanocomposites, Journal of Electronic Materials, 2022, https://doi.org/10.1007/s11664-022-09656-x.
  30. Venkatachalam, G., Deshmukh, A.R., Annamalai, A.R., Vignesh, P., GokulaKrishnan, B., Vijay, V. and Jen, C.P., Fatigue Life Prediction Using Virtual Strain Gauge for Backing Strip Full Penetration Weld Joint, Journal of the Chinese Society of Mechanical Engineers, Vol.43 (2), pp127 – 141, 2022.
  31. Lakshmi Narayana, S. and Venkatachalam, G., Investigations on mechanical properties of jute fibre reinforced with aluminium oxide fortified epoxy composite, Advances in Materials and Processing Technologies, 2022, https://doi.org/10.1080/2374068X.2022.2096836.
  32. Loganathan, T.G., Vinoth, K.K., Bari, K., Chadalavala, H. and Venkatachalam, G., Structural integrity evaluation of cyclic loading Glass Fibre Reinforced Polymer composite by acoustic emission and heat transfer, Journal of Composite Materials, 2022, https://doi.org/10.1177/00219983221121891
  33. Dinesh R.S. and Venkatachalam G., Investigation of electrical resistance and dielectric constant of Boron Nitride and Banana fiber reinforced epoxy polymer matrix composite, Polymers and Polymer Composites, 2022, https://doi.org/10.1177/09673911221122328.
  34. Venkatachalam G., Aravindh S., Loganathan T.G., Vignesh P. and Pandivelan C., Investigations on Tensile and Flexural Behaviours of Fly Ash / Coir Reinforced Polymer Matrix Composites, Brazilian Archives of Biology and Technology,  65, pp 1-14, 2022.
  35. Venkatachalam G., Hitesh B.N., Deshmukh A.R., Senthilnathan N., Achuthan M., Jeyanthi S. and Pandivelan C., Virtual Fatigue Life Prediction of Back Strip Butt Weld Joint under Bending and Torque Load Conditions, Materials Science (MEDŽIAGOTYRA), Vol. 28 (4), pp 519-528, 2022.
  36. Venkatachalam G., Arunkumar G., Shenbaga Velu P., Neelanarayanan V., Dinesh R.S. and Raghava Rao, Study on Tensile Properties of Fly Ash, Sugarcane Fiber and Carbon Nanotube-Reinforced Polymer Matrix Composite Using Objective Evolutionary Algorithm, Nanomaterials, Vol.12 (23), 4112, 2022.
  37. Aravindh, S. and Venkatachalam, G, 2022, Investigation on Elastic Constants of Microfibril Reinforced Poly Vinyl Chloride Composites Using Impulsive Excitation of Vibration, Polymers, Vol. 14 (23), 5083, 2022.
  38. Narayanan R., Venkatachalam G. and Kwon, T.Y., Corrosion of Stirred Electrochemical Nano-Crystalline Hydroxyapatite (HA) Coatings on Ti6Al4V, Materials, Vol.15 (23), 8609, 2022.

2021:

  1. Venkatachalam Gopalan, Vimalanand, A. Raja Annamalai, Santhanakrishnan Manivannan, Vignesh Pragasam, Panidvelan Chinnaiyan, Giriraj Mannayee and Chung-Ping Jen, “Dynamic characteristics of Woven Flax/Epoxy laminated composite plate”, Polymers, January 2021.
  2. Venkatachalam, G., Vimalanand, S., Jefferson S D, Jeyanthi S, Raja Annamalai, S. and Jen, C.P., “Experimental and numerical analyses on the buckling characteristics of woven flax/epoxy laminated composite plate under axial compression”, Polymers, 13 (7), 995, 2021.
  3. Senthilnathan Natarajan, Venkatachalam Gopalan, Raja Annamalai Arunjunai Rajan, Chun-Ping Jen, “Effect of Rare Earth Metals (Y, La) and Refractory Metals (Mo, Ta, Re) to improve mechanical properties of W-Ni-Fe Alloy – A review”, Materials, 14(7), 1660,
  4. V. Meena and A. Ravi Sankar, “Biomedical Catheters With Integrated Miniature Piezoresistive Pressure Sensors: A Review,” in IEEE Sensors Journal, vol. 21, no. 9, pp. 10241-10290, 1 May1, 2021. (A 50-page review paper)
  5. Dinesh Ramesh Salunke, Venkatachalam Gopalan, “Thermal and electrical behaviors of boron nitride/epoxy reinforced polymer matrix composite – review”, 2021, 1-11, Polymer Composites, Wiley, January 2021.
  6. Saranya and A. Ravi Sankar, “Fabrication of micro-mechanical planar cantilever beam-mass structures on quartz substrates using an ECDM process,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture – 2021.
  7. Ribu Mathew, A. Ravi Sankar, “Temperature drift-aware material selection of composite piezoresistive micro-cantilevers using Ashby’s methodology,” Microsystem Technologies, vol. 27, pp. 2647–2660, 2021
  8. Jeyanthi S, Vinoth Kumar S, Venkatachalam G, Gupta M, Rohan Singh, “An investigation of EMI shielding effectiveness of organic polyurethane composite reinforced with MWCNT-CuO-Bamboo charcoal nanoparticles”, Journal of Electronic Materials, 2021.
  9. Sekar Mano, Radhakrishnan Ajay Sriram, Ganesan Vinayagamurthy, Subramania Nadaraja Pillai, Amjad Ali Pasha, Dwarshala Siva Krishna Reddy, Mustafa Mutiur Rahman, “Effect of a Circular Slot on Hybrid Airship Aerodynamic Characteristics”, Aerospace, 8(6), 166,2021.
  10. G., Vyas R, Goswami I, Shah A and Vignesh. P., “Tensile behavior of sugarcane fiber/fly ash/CNT reinforced epoxy composites”, UPB Sci. Bull., Series D, Vol. 83 (1), pp 181-192, 2021.
  11. Gokula Krishnan. B., G. and Deshmukh A, “Prediction of fatigue life of full penetration weld joint using thermal elasto plastic properties incorporating residual stress effect”, UPB Sci. Bull., Series D, Vol. 83 (1), pp 135-148,2021.
  12. Venkatachalam, G., Vyas, R., Goswami, I., Shah, A. and Vignesh, P., “Flexural Analysis of Epoxy Polymer Composite Reinforced with Sugarcane Fibre/Fly Ash/Carbon-Nanotube”, International Journal of Surface Engineering and Interdisciplinary Materials Science, Vol. 9 (1), pp 87-99, 2021.
  13. Anu Sindhya K, G. Vinayagamurthy “Investigation of jet mixing characteristics using slotted rectangular tabs”, Journal of Aerospace Technology and Management, Vol. 13, 2021.
  14. Guru Anandan, Venkatachalam G. and Senthilnathan Natarajan, “Thermal buckling of flax fibre reinforced epoxy laminated composite plate using finite element analysis,” International Journal for Computational Methods in Engineering Science and Mechanics, 2021. DOI: 10.1080/15502287.2021.1948149.
  15. Grace Jency, M. Sekar, and A. Ravi Sankar, Damping analysis of a quad beam MEMS piezoresistive accelerometer,International Journal of Modelling and Simulation,41:4,256-264, 2021.
  16. Karthigeyan, K.A., Radha, S. & E. Manikandan, “Numerical analysis of substrate thickness and its etching effect on broadband/narrowband terahertz metamaterial”, Opt Quant Electron Vol. 53, pp. 675, 2021.
  17. Elakkiya, A., Radha, S., Sreeja, B.S, E.Manikandan, “Terahertz single dual multi-band metamaterial absorber”, Pramana – J Phys Vol. 95, pp. 163, 2021.
  18. Bala Subramanian, K.S. Resmi, Prita Nair, E. Manikandan, Ravi Nathuram Bathe, “Formation of waveguides in crystalline organic N-benzyl-2-methyl-4-nitroaniline thin films using femtosecond laser ablation process”, Materials Letters, 301, 130220, 2021.
  19. Elakkiya, A., Radha, S., Sreeja, B.S. E.Manikandan, “An Ultrathin Microwave Metamaterial Absorber for C, X, and Ku Band Applications”, J. Electron. Mater. 50, 7275–7282, 2021.
  20. Kanchana, D., Radha, S., Sreeja, B., & Manikandan, E, “A miniaturized flexible frequency selective surface for dual band response”. International Journal of Microwave and Wireless Technologies, 13(8), 810-816, 2021.
  21. Preethi, M.Venkatesh, M. Karthigai Pandian and G.Lakshmi Priya, “Analytical Modeling and Simulation of Gate-All-Around Junctionless MOSFET for Biosensing Applications”, Silicon, 13, 3755–3764, 2021.
  22. Lakshmi Priya, M.Venkatesh, N.B.Balamurugan and T.S.A. Samuel “Triple Metal Surrounding Gate Junctionless Tunnel FET Based 6T SRAM Design for Low Leakage Memory System”, Silicon, 13, 1691 – 1702, 2021.
  23. Venkatesh, G.Lakshmi Priya, N.B.Balamurugan, “Investigation of Ambipolar Conduction and RF Stability Performance in Novel Germanium Source Dual Halo Dual Dielectric Triple Material Surrounding Gate TFET”, Silicon, 13, 911 – 918, 2021.

2020:

  1. Thozhur Loganathan, K. Vinoth Kumar, K. Ayyappa, G. Mahendran and Venkatachalam, G., “Mechanical and Vibrational Property Evaluation of Banana Fiber Epoxy Sandwich Composite with Steel Wire Mesh Core”, Journal of Natural Fibers, 2020.
  2. Sakthivel and A. Ravi Sankar, “Computation-efficient image watermarking architecture with improved performance”, Computers & Electrical Engineering, Vol. 84, 106649, 2020.
  3. Venkatachalam, G., Vimalanand, S., Tiwari, S.K., Mehta, N., and Shukla, S., “Dynamic Characteristics of Honeycomb Sandwich Beam Made with Jute/Epoxy Composite Skin”, Emerging Materials Research, Vol. 9 (1), pp 132-140, 2020.
  4. Sivakumar, M., Venkatachalam, G., Hemanth, V., Vignesh, P., Prashanth, P. and Vimalanand, S., “Studies on Shear Strength of CNT/Coir Fibre/Fly Ash Reinforced Epoxy Polymer Composites”, Emerging Materials Research, Vol. 9 (1), pp 78-88, 2020.
  5. Guru, A., Venkatachalam, G. and Vasudevan, R., “Investigation on thermal buckling Analysis of Jute/Epoxy Polymer Matrix Composite”, Emerging Materials Research, Vol. 9 (4), pp 1229-1236, 2020.
  6. Rajasekarababu, G Vinayagamurthy., “CFD validation of wind pressure distribution on tall building structure under upstream terrain winds” Progress in Computational Fluid Dynamics, 2020.
  7. Venkatachalam, G., Sharma, S.K., Jangid, A.K., Vignesh, P., Nilesh, S.N. and Pandivelan, C., “Investigations on Tensile and Flexural Characteristics of Fly Ash and Banana Fiber-Reinforced Epoxy Matrix Composites”, Engineering Transactions, Vol. 68 (1), pp 89-101, 2020.
  8. Venkatachalam, G., Bhardwaj, P., Satonkar, N. and Pragasam, V. “Determination of Fatigue Limit of Coir/CNT/Fly Ash Reinforced Epoxy Polymer Matrix Composite”, Periodica Polytechnica Mechanical Engineering, 64(3), pp. 248–255, 2020.
  9. Kalaimathi, M., Venkatachalam, G. and Sivakumar, M., “An experimental investigation and modelling for travelling wire electrochemical machining of Monel 400 alloys”, International Journal of Manufacturing Technology and Management, Vo. 34 (3), pp 259-281, 2020.
  10. Kalaimathi, M., Venkatachalam, G., Sivakumar, M. and Ayyappan, S., “Multi-response optimisation of electrochemical machining process parameters by harmony search-desirability function optimiser”, International Journal of Manufacturing Technology and Management, Vol. 34 (4), pp 331-348, 2020.
  11. Venkatachalam, G., Sivakiran, G., Vishnu, P.C., Yash, G., Vignesh, P. and Annamalai, K., “Investigations on surface roughness of natural (banana / coir / sisal) fiber reinforced hybrid polymer matrix composites”, UPB Sci. Bull., Series D, Vol. 82 (2), pp 191-198, 2020.
  12. Sahu, O.P. and Biswal, B.B., “Sensor Integrated Robotic Hand for Industrial Application”, International Journal of Mechanical Engineering and Robotics Research, 9(1), pp.30-34, 2020.
  13. Venkatachalam, G., Vignesh, P., Hitesh, B.N., Gokulakrishnan, B. and Pandivelan, C., 2020, Investigation on Machining Characteristics of Banana Fiber and Silicon Carbide Reinforced Polymer Matrix Composites, Engineering Transactions, Vol. 68 (3), pp 297-313. 2020.
  14. Indhu, S. Radha, E. Manikandan, B. S. Sreeja, “A retrospect on laser micromachining for the fabrication of microfluidic components”, Journal of Optoelectronics and Advanced Materials, 22 (7-8), 400-410, 2020.
  15. A. Karthigeyan, E. Manikandan, S. Radha, “Performance analysis of Terahertz planar antenna on Low-K polymer substrates”, Journal of Optoelectronics and Advanced Materials, 22 (5-6), 244-250, 2020.

2019:

  1. Rajasekarababu and G. Vinayagamurthy, “Experimental and Computational investigation of outdoor wind flow around a setback building”, Building simulation, pp. 1-14, 2019.
  2. Vimalanand, S. and Venkatachalam, G., Ananda babu, A. and Balamurugan, R., “Dynamic characterization of the thickness tapered laminated plant fiber-reinforced polymer matrix composite plates”, Advanced composite materials, Vol. 28 (2), pp 163-191, 2019.
  3. Venkatachalam, G., Vimalanand, S. and Vignesh, P., “Experimental and numerical investigation on the dynamic characteristics of thick laminated plant fiber-reinforced polymer composite plates”, Archive of Applied Mechanics, Vol. 89 (2), pp 363-384, 2019.
  4. Ribu Mathew and Ravi Sankar, “Influence of surface layer properties on the thermo-electro-mechanical characteristics of a MEMS/NEMS piezoresistive cantilever surface stress sensor”, Materials Research Express, 2019.
  5. Venkatachalam, G., Reddy, D.M., Tiwari, S., Satonkar, N. and Kovalan, S., “Fracture and flexural analysis of sandwich panel with polypropylene honeycomb as core and jute fabric reinforced epoxy matrix composite as skin layer”, Materials Research Express, Vol. 6 (11), 2019.
  6. Vignesh, P., Reddy, D.M. and Venkatachalam, G., “Cellulose microfibrils from banana fibers: Characterization at different chemical processes”, Materials Research Express, Vol. 6 (12), 2019.
  7. Rajasekarababu and G. Vinayagamurthy, “Experimental and Computational Simulation of an Open Terrain Wind Flow around a Setback Building using Hybrid Turbulence Models”, Journal of Applied Fluid Mechanics, Vol.12, No. 1, pp. 145-154,2019.
  8. Venkatachalam, G., Akshay, I., Giriraj, M., Vignesh, P., Aamer, A.K. and Rishi Dam, “The Effect of Fiber Size on Tensile Characteristics of Natural Fiber Reinforced Composites”, Emerging Materials Research, Vol. 8 (3), pp 426-433, 2019.
  9. Senthilnathan, N., Rajaannamalai, A. and Venkatachalam, G., “Effect of Cobalt Addition on the Morphology and Mechanical Properties of W-Ni-Cu-Co Alloy”, Emerging Materials Research, Vol. 8 (4), pp 558-566, 2019.
  10. Vimalanand, S., Venkatachalam, G., Nikam, T.D., Jog, O.V., and Suryavanshi, R.T., “Determination of Vibrational Characteristics of Coir, Banana and Aloe Vera Fibres Reinforced Hybrid Polymer Matrix Composites”, International Journal of Acoustics and Vibration, Vol. 24(1), pp 12-19, 2019.
  11. Shankarganesh, P.S.P., Muralikannan, R.b and Venkatachalam, G., “Vibration and damping characteristics of hybrid (glass- jute/ sisal/ hemp) fiber reinforced polymer matrix composites to protect environment by natural fiber”, Journal of the Balkan Tribological Association, Vol. 25(1), pp 142 – 151, 2019
  12. Nilesh, S. and Venkatachalam, G., “A Review on Electromagnetic Sheet Metal Forming of Continuum Sheet Metals”, SAE International Journal of Materials and Manufacturing, Vol. 12(2), pp 121 – 133, 2019

2018:

  1. Ribu Mathew and Ravi Sankar, “A review on surface stress based miniaturized piezoresistive SU-8 polymeric cantilever sensors”, Nano-Micro Letters, Vol. 10, 1-41, 2018.
  2. Senthilnathan, N., Rajaannamalai, A. and Venkatachalam, G., “Microstructure and mechanical properties of spark plasma sintered tungsten heavy alloys”, Materials Science and Engineering A, Vol. 710, pp 66-73, 2018.
  3. Saranya and Ravi Sankar, “Fabrication of precise microchannels using a side-insulated tool in a spark assisted chemical engraving process”, Materials and Manufacturing Processes, Vol. 33, pp- 1422-1428, 2018.
  4. Sakthivel and A. Ravi Sankar, “An ASIC based invisible watermarking of grayscale images using pixel value search algorithm (PVSA)”, Multimedia Tools and Applications, Vol. 77, pp- 26793–26819, 2018.
  5. Ribu Mathew and Ravi Sankar, “Optimization of a nanocantilever Biosensor for reduced self-heating effects and improved performance metrics”, Journal of Micromechanics and Microengineering, Vol. 28, 085012, 2018.
  6. Saranya and Ravi Sankar, “Fabrication of precise micro-holes on quartz substrates with improved aspect ratio using the constant velocity feed drilling technique of an ECDM process”, Journal of Micromechanics and Microengineering, Vol. 28, 125009, 2018.
  7. Ribu Mathew and Ravi Sankar, “Impact of isolation and immobilization layers on the electro-mechanical response of piezoresistive nano cantilever sensors”, Journal of Nanoscience and Nanotechnology, 18, pp- 1636-1647, 2018.
  8. Ribu Mathew and Ravi Sankar, “Piezoresistive composite silicon dioxide nanocantilever surface stress sensor: design and optimization”, Journal of Nanoscience and Nanotechnology, 18, pp- 3387-3397, 2018.
  9. Deshmukh, A.R., Venkatachalam, G. and Saraf, M.R., “Fatigue life prediction of joggle weld joint using virtual strain gauge and its validation through experiments”, Mechanics & Industry, Vol. 19 (6), 2018.
  10. Senthilnathan, N., Rajaannamalai, A. and Venkatachalam, G., “Synthesis of tungsten through spark plasma and conventional sintering processes”, Materials today proceedings, Vol. 5 (2), pp 7954-7959, 2018.
  11. Sivakiran, G., Yash, G., Venkatachalam, G., Pandivelan, C. and Ayyappan, S., “Investigations on machining of banana fibre reinforced hybrid polymer matrix composite materials”, Materials today proceedings, Vol. 5 (2), pp 7908-7914, 2018.
  12. Hitesh, K., Rohit, K., Ajinkya, M., Shekar, T., Onkar, M. and Venkatachalam, G., “Study on tensile behavior of fly ash reinforced hybrid polymer matrix composite”, Materials today proceedings, Vol. 5 (2), pp 11922-11932, 2018.
  13. Vignesh, Venkatachalam, G., Gautham, A.S., Anshuman, S., Rishi, P. and Ankita, P., “Studies on tensile strength of sugarcane fiber reinforced hybrid polymer matrix composite”, Materials today proceedings, Vol. 5 (2), pp 13347-13357, 2018.
  14. Marathe, A.V., Venkatachalam, G. and Marathe, N.V., “Cylinder Head Bolt Tightening Strategies in Case of Multi-Cylinder Engines and Its Effect on Gasket Sealing Performance, Bore Deformation and Piston Ring Conformability”, Australian Journal of mechanical engineering, 2018.
  15. Marathe, A.V., Venkatachalam, G. and Marathe, N.V., “Cylinder Head Bolts Tightening Strategies Parameters Finalization by Taguchi Method for Multi Cylinder Engines”, International review of mechanical engineering, Vol. 12 (4), pp 310-319, 2018.
  16. Venkatachalam, G., Mehta, N.H., Shukla, S., Gupta, Y., Sharma, A., Ghosh, R. and Rajan, G., “Experimental Investigations on Flexural and Fracture Behaviors of Flax Fiber Reinforced Sandwich Panels”, International review of mechanical engineering, Vol. 12 (3), pp 231-238, 2018.
  17. Graceraj, P.P., Venkatachalam, G., Garg, A.S. and Afsan, M.A., “Determination of stress intensity factors of jute fiber-reinforced hybrid polymer matrix composites”, Composites: Mechanics, computations, applications, Vol. 9 (1), pp 41-50, 2018.
  18. Jain, K., Kumar, S., Venkatachalam, G., Vimalanand, S. and Ayyappan, S., “Vibrational analysis of hybrid fabric reinforced polymer matrix curved composite beams”, Composites: Mechanics, computations, applications, Vol. 9 (3), pp 269-282, 2018.
  19. Venkatachalam, G., Vignesh, P., Banarjee, D., Karmakar, S. and Reddy, D.M., “Analysis of Tensile and Flexural Strengths of Kenaf Fabric reinforced Hybrid Polymer Matrix Composite”, Composites: Mechanics, computations, applications, Vol. 9 (4), pp 363-379, 2018.
  20. Venkatachalam, G., Vignesh, P., Banarjee, D., Karmakar, S. and Reddy, D.M., “Analysis of Tensile and Flexural Strengths of Kenaf Fabric reinforced Hybrid Polymer Matrix Composite”, Composites: Mechanics, computations, applications, Vol. 9 (4), pp 363-379, 2018.
  21. Venkatachalam, G., Vignesh, P., Omkar, V.J., Tushar, D. N., and Gautham, S., “Determination of stress intensity factor (SIF) of coir and aloe vera fiber reinforced hybrid polymer matrix composites”, UPB Sci. Bull., Series D, Vol. 80(1), pp 219 – 228, 2018.
  22. Kazi, A., Dam, R., Datta, S., Venkatachalam, G. and Rajan, G., “Flexural and fracture analysis of polymer metal hybrid composite panels reinforced with natural fibers”, UPB Sci. Bull., Series B, Vol. 80(3), pp 85 – 96, 2018.
  23. B. Rajasekarababu and G. Vinayagamurthy, “Computational Simulation of Wind Flow Behavior Around a Building Structure”, Lecture Notes in Mechanical Engineering-Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering, Vol 1, 325-331, 2018.

2017:

  1. Senthilnathan, N., Rajaannamalai, A. and Venkatachalam, G., “Activated sintering of Tungsten alloys through conventional and spark plasma sintering process”, Materials and Manufacturing Processes, Vol. 32 (16), pp 1861-1868, 2017.
  2. V. Meena, Ribu Mathew, Jyothi Leelavathi and A. Ravi Sankar, “Performance comparison of a single element piezoresistor with a half-active Wheatstone bridge for miniaturized pressure sensors”, Measurement, Vol-111, pp-340-350, 2017.
  3. Vimalanand, S. and Venkatachalam, G., “Elastic constants of tapered laminated woven jute/epoxy and woven aloe/epoxy composites under the influence of porosity”, Journal of reinforced plastics and composites, Vol.36 (19), pp1453-1469, 2017.
  4. Saranya, Aswathi Nair and Ravi Sankar, “Experimental investigations on the electrical and 2D-machining characteristics of an electrochemical discharge machining (ECDM) process”, Microsystem Technologies, Vol-23, Issue-5, pp-1453-1461, 2017.
  5. Vetrivel, Ribu Mathew and Ravi Sankar, “Design and optimization of a doubly clamped piezoresistive acceleration sensor with an integrated silicon nanowire piezoresistor”, Microsystem Technologies, Vol-23, Issue-8, pp-3525-3536, 2017.
  6. Kalaimathi, M., Venkatachalam, G., Sivakumar, M. and Ayyappan, S., “Experimental investigation on the suitability of ozonated electrolyte in travelling wire electrochemical machining”, Journal of the Brazilian society of mechanical sciences and engineering, Vo. 39 (11), pp 4589-4599, 2017.
  7. Ribu Mathew and Ravi Sankar, “In Silico modeling and investigation of self-heating effects in composite nano cantilever biosensors with integrated piezoresistors”, AIP Advances, 7, 035108, 2017.
  8. Harichandran, R., Selvakumar, N. and Venkatachalam, G., “High temperature wear behavior of Nano/Micro B4C reinforced aluminium matrix composites fabricated by an ultrasonic cavitation – assisted solidification process”, Transactions of Indian institute of metals, Vol. 70 (1), pp 17-29, 2017.
  9. Senthilnathan, N., Rajaannamalai, A. and Venkatachalam, G., “Sintering of Tungsten and Tungsten heavy alloys of W-Ni-Fe and W-Ni-Cu: A review”, Transactions of Indian institute of metals, Vol. 70 (5), pp 1161-1176, 2017.
  10. Meena, Ribu Mathew and A. Ravi Sankar, “Design and optimization of a three terminal piezoresistive pressure sensor for catheter based in-vivo biomedical applications”, Biomedical Physics and Engineering Express, Vol. 3, 045003, 2017.
  11. Harikrushna, D., Venkatachalam, G. and Ayyappan, S., “Optimization of parameters influencing the dynamic behavior of a banana fibre reinforced hybrid polymer matrix compsoites”, Composites: Mechanics, computations, applications, Vol. 8 (1), pp 35-46, 2017.
  12. Premkumar, S Nadaraja Pillai, S Arunvinthan, S.Sivaraja, G.Vinayagamurthy, “Study on influence of operating wind turbine on upstream and downstream flow using k-epsilon turbulence model”, Journal of Advanced Research in Dynamical and Control Systems, Vol. 14, pp. 844-856, 2017.
  13. Rajakumar, S., Ravindran, D., Sivakumar, M., Venkatachalam, G. and Muthukumar, S., “Optimization of power coefficient of wind turbine using genetic algorithm”, Journal of The institution of engineers (India): Series C, 98 (2), pp 111-118, 2017.
  14. Patle, B.K., Parhi, D., Jagadeesh, A. and Sahu, O.P., “Real Time Navigation Approach for Mobile Robot”, JCP, 12(2), pp.135-142, 2017
  15. Venkatachalam, G., Vipin, V., Vignesh, P., Ghule, K., and Saluja, J.S., “Investigation on dynamic behaviour of sandwich panels made of aluminium and hybrid polymer and optimization of design parameters using Taguchi method”, UPB Sci. Bull., Series D, Vol. 79(4), pp 205 – 214, 2017.

2016:

  1. Ribu Mathew and Ravi Sankar, “Numerical study on the influence of buried oxide layer of SOI wafers on the terminal characteristics of a micro/nano cantilever biosensor with an integrated piezoresistor”, Biomedical Physics & Engineering Express, Vol-2, 055012, 2016.
  2. Graceraj, P.P., Venkatachalam, G., Garg, A.S., Vimal, A. and Afsan, A., “Flexural Behaviour of Jute-Reinforced Hybrid polymer matrix composite,” Composites: Mechanics, computations, applications, Vol. 7(1), pp 17 – 30., 2016.
  3. Marathe, A.V., Marathe, N.V. and Venkatachalam, G., “Angular torque methodology for cylinder head bolted joint and validation by FE and experimental work”, International Journal of Manufacturing, Materials, and Mechanical Engineering, Vol. 6 (4), pp 11-29, 2016.
  4. Venkatachalam, G., Renjith, S.C., Nilay, P.S., Vasan, M. and Annamalai, R., “Investigations on tensile strength of banana fibre reinforced hybrid polymer matrix composites”, Engineering Review, Vol. 36 (1), pp 13-18, 2016.
  5. Ravi, T.S., Venkatachalam, G. and Vimalanand, S.V., “Determination of stress intensity factor of banana fibre reinforced hybrid polymer matrix composite using finite element method”, Periodica Polytechnica Mechanical Engineering, Vol. 60(3), pp 180 – 184, 2016.
  6. Graceraj, P.P., Venkatachalam, G., Gautham, S., and Krishna Kumar, “Investigation on fatigue strength of the jute fiber reinforced hybrid polymer matrix composites”, UPB Sci. Bull., Series D, Vol. 78(1), pp 185 – 196, 2016.
  7. Graceraj, P.P., Venkatachalam, G., Pandivelan, C., Gautham, S., and Chandanbyral, R., “Analysis of mechanical behavior of hybrid fiber (Jute-Gongura) reinforced hybrid polymer matrix composites”, UPB Sci. Bull., Series D, Vol. 78(3), pp 65 – 80, 2016.
  8. Venkatachalam, G., Nishanth, J., Mukesh, M. and Pavankumar, D.S., “Study of forming behavior of square hole mild steel perforated sheet metal”, Applied Mechanics and Materials, Vol. 852, pp 218-228, 2016.
  9. Venkatachalam, G., Nishanth, J., Mukesh, M. and Pavankumar, D.S., “Investigations on influence of geometric parameters in drawing of perforated sheet metals”, Applied Mechanics and Materials, Vol. 852, pp 229-235, 2016.
  10. Harikrushna, D. and Venkatachalam, G., Dynamic analysis of banana fibre reinforced hybrid polymer matrix composite using ANSYS and optimization of design parameters, Applied Mechanics and Materials, Vol. 852, pp 3-9, 2016.

2015:

  1. Ribu Mathew and Ravi Sankar, “Design of a triangular platform piezoresistive affinity microcantilever sensor for biochemical sensing applications”, Journal of Physics D: Applied Physics, Vol-48, 205402, 2015.
  2. Venkatachalam, G., Gupta, A. and Gautham Shankar, A., “Flexural analysis of coir fibre reinforced hybrid polymer matrix composites”, Composites: Mechanics, computations, applications, Vol. 6(2), pp 105 – 112, 2015.
  3. Venkatachalam, G., Varun, M., Vimal, A. and Gautham Shankar, A., “Impact analysis of vehicle chassis made of polymer metal hybrids”, Composites: Mechanics, computations, applications, Vol. 6(4), pp 293 – 305, 2015.
  4. Ramakishorebabu, G., Revanthkumar, J., Anandh, P., Venkatachalam, G., and prabaharan, G.P., “Investigations on wear and frictional characteristics of hybrid polymer”, Applied Mechanics and Materials, Vol. 766-767, pp 34-37, 2015.
  5. Graceraj, P. P. and Venkatachalam, G., “Investigations on tensile strength of jute fibre reinforced hybrid polymer matrix composites”, Engineering Review, Vol. 35 (3), pp 275-281, 2015.
  6. Ayyappan, S., Kalaimathi, M. and Venkatachalam, G., “Cost tolerance prediction models for electrochemical machining of metal matrix composites”, Engineering Review, Vol. 35 (3), pp 299-307, 2015.

Before 2015:

  1. Ravi Sankar and S. Das, “Experimental analysis of galvanic corrosion of a thin metal film in a multilayer stack for MEMS application,” Materials Science in Semiconductor Processing, Vol-16, pp-449-453, 2013.
  2. Ravi Sankar and S. Das, “A very-low cross-axis sensitivity piezoresistive accelerometer with an electroplated gold layer atop a thickness reduced proof mass,” Sensors and Actuators A, Vol-189, pp-125-133, 2013.
  3. Venkatachalam, G., Harichandran, R., Rajakumar, S., Dharmaraja, C. and Pandivelan, C., Dec 2008, “Determination of J-Integral and Stress Intensity Factor Using the Commercial FE Software ABAQUS in Austenitic Stainless Steel (AISI 304) Plates,” Int J Adv Manuf Technol,
  4. Ravi Sankar, J. Grace Jency and S. Das, “Design, fabrication and testing of a high performance silicon piezoresistive Z-axis accelerometer with proof mass-edge-aligned-flexures,” Microsystem Technologies, vol. 18, 15, pp. 9-23, 2012.
  5. Ravi Sankar, V. Swathi Sree Bindhu and S. Das, “Coupled effects of gold electroplating and electrochemical discharge machining processes on the performance improvement of a capacitive accelerometer,” Microsystem Technologies, vol. vol. 17, pp. 1661-1670, 2011.
  6. Ravi Sankar, J. Grace Jency, J. Ashwini and S. Das, “Realisation of a silicon piezoresistive accelerometer with proof mass-edge-aligned-flexures using wet anisotropic etching,” IET Micro & Nano Letters, Vol-7, pp-118-121, 2012.
  7. Venkatachalam, G., Narayanan, S. and Sathiya Narayanan, C., 2012, “A finite element method based formability analysis of triangular pattern of square hole perforated commercial pure aluminium sheets,” International Journal of Mechanical and Materials Engineering, Vol. 7 (3), pp 209-213
  8. Deshmukh, A.R., Venkatachalam, G., Hemant, D.C. and Saraf, M.R., 2014, “Effect of weld penetration on fatigue life,” Procedia Engineering, Vol. 97, pp 783 – 789.
  9. Kalaimathi, M., Venkatachalam, G. and Sivakumar, M., 2014, “Experimental Investigations on the electrochemical machining characteristics of monel 400 alloys and optimization of process parameters,” Jordan Journal of Mechanical and Industrial Engineering, Vol. 8(3), pp 143-151.
  10. Ayyappan, S., Kalaimathi, M. and Venkatachalam, G., 2014, “Multi-Objective Optimization of Process Parameters for Electrochemical Machining of 6061Al/10%Wt     Al2O3/ 5%Wt SiC Composite using Hybrid Fuzzy-Artificial Bee Colony Algorithm,” Jordan Journal of Mechanical and Industrial Engineering, Vol. 8(5), pp 323-331.
  11. Sankar, A.K., Mohanam, K., Venkatachalam, G., Karthikeyan, S. and Narayanan, S., 2014, “Influence of Nickel coating on flexural and dynamic behaviour of Aluminium,” Procedia Engineering, Vol. 97, pp 1368 – 1378.
  12. Senthilnathan, N., Venkatachalam, G. and Nilesh, N.S., 2014, “A two stage finite element analysis of electromagnetic forming of perforated aluminium sheet metals,” Procedia Engineering, Vol. 97, pp 1135 – 1144.
  13. Vishnu, P., Ajil, J., Venkatachalam, G., Narayanan, S. and Rajakumar, S., 2014, “Finite Element analysis of jute and banana fibre reinforced hybrid polymer matrix composite and optimization of design parameters using ANOVA technique,” Procedia Engineering, Vol. 97, pp 1116 – 1125.
  14. Vinayagamurthy, G., Tamura, Y., Qingkuan, L., Zheng, Y., Matsui, M. 2014, “Effect of wind speed, wind direction, rainfall intensity, damping and cable diameter on vibration amplitude of the cable,” Journal of Structural Engineering (India), 41(1), pp. 26–30
  15. Lenin Rakesh, N., Palanisamy, V., Vinayagamurthy, G. 2013, “Stress analysis of spider type flexible couplings by using NX Nastran,” Middle-East Journal of Scientific Research, 2013, 14(12), pp. 1748–1751