Centre for Innovation and New Product Development

Research - Some recent journal publications by the faculty members of the research centre

The details of research manuscripts published by the faculty members of the research group in peer-reviewed, Clarivate-indexed, and/or Scopus-indexed journals are provided hereunder. We have used the 2020 impact factors of the journals.

2021:

  1. Venkatachalam Gopalan, Vimalanand, A. Raja Annamalai, Santhanakrishnan Manivannan, Vignesh Pragasam, Panidvelan Chinnaiyan, Giriraj Mannayee and Chung-Ping Jen, “Dynamic characteristics of Woven Flax/Epoxy laminated composite plate”, Polymers, January 2021. [Impact factor: 4.329]
  2. Venkatachalam, G., Vimalanand, S., Jefferson S D, Jeyanthi S, Raja Annamalai, S. and Jen, C.P., “Experimental and numerical analyses on the buckling characteristics of woven flax/epoxy laminated composite plate under axial compression”, Polymers, 13 (7), 995, 2021. [Impact Factor: 4.329]
  3. Senthilnathan Natarajan, Venkatachalam Gopalan, Raja Annamalai Arunjunai Rajan, Chun-Ping Jen, “Effect of Rare Earth Metals (Y, La) and Refractory Metals (Mo, Ta, Re) to improve mechanical properties of W-Ni-Fe Alloy – A review”, Materials, 14(7), 1660, [Impact factor: 3.623]
  4. V. Meena and A. Ravi Sankar, “Biomedical Catheters With Integrated Miniature Piezoresistive Pressure Sensors: A Review,” IEEE Sensors Journal, vol. 21, no. 9, pp. 10241-10290, 1 May1, 2021. [Impact factor: 3.301] (A 50-page review paper)
  5. Dinesh Ramesh Salunke, Venkatachalam Gopalan, “Thermal and electrical behaviors of boron nitride/epoxy reinforced polymer matrix composite – review”, 2021, 1-11, Polymer Composites, Wiley, January 2021. [Impact factor: 3.171]
  6. Saranya and A. Ravi Sankar, “Fabrication of micro-mechanical planar cantilever beam-mass structures on quartz substrates using an ECDM process,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture – 2021. [Impact factor: 2.610]
  7. Ribu Mathew, Ravi Sankar, “Temperature drift-aware material selection of composite piezoresistive micro-cantilevers using Ashby’s methodology,” Microsystem Technologies, vol. 27, pp. 2647–2660, 2021 [Impact factor: 2.276]
  8. Jeyanthi S, Vinoth Kumar S, Venkatachalam G, Gupta M, Rohan Singh, “An investigation of EMI shielding effectiveness of organic polyurethane composite reinforced with MWCNT-CuO-Bamboo charcoal nanoparticles”, Journal of Electronic Materials, 2021. [Impact Factor: 1.938]
  9. Sekar Mano, Radhakrishnan Ajay Sriram, Ganesan Vinayagamurthy, Subramania Nadaraja Pillai, Amjad Ali Pasha, Dwarshala Siva Krishna Reddy, Mustafa Mutiur Rahman, “Effect of a Circular Slot on Hybrid Airship Aerodynamic Characteristics”, Aerospace, 8(6), 166,2021. [Impact Factor: 1.659]
  10. G., Vyas R, Goswami I, Shah A and Vignesh. P., “Tensile behavior of sugarcane fiber/fly ash/CNT reinforced epoxy composites”, UPB Sci. Bull., Series D, Vol. 83 (1), pp 181-192, 2021.
  11. Gokula Krishnan. B., G. and Deshmukh A, “Prediction of fatigue life of full penetration weld joint using thermal elasto plastic properties incorporating residual stress effect”, UPB Sci. Bull., Series D, Vol. 83 (1), pp 135-148,2021.
  12. Venkatachalam, G., Vyas, R., Goswami, I., Shah, A. and Vignesh, P., “Flexural Analysis of Epoxy Polymer Composite Reinforced with Sugarcane Fibre/Fly Ash/Carbon-Nanotube”, International Journal of Surface Engineering and Interdisciplinary Materials Science, Vol. 9 (1), pp 87-99, 2021.
  13. Anu Sindhya K, Vinayagamurthy “Investigation of jet mixing characteristics using slotted rectangular tabs”, Journal of Aerospace Technology and Management, Vol. 13, 2021.
  14. Guru Anandan, Venkatachalam G. and Senthilnathan Natarajan, “Thermal buckling of flax fibre reinforced epoxy laminated composite plate using finite element analysis,” International Journal for Computational Methods in Engineering Science and Mechanics, 2021. DOI: 10.1080/15502287.2021.1948149.

 

2020:

  1. Thozhur Loganathan, K. Vinoth Kumar, K. Ayyappa, G. Mahendran and Venkatachalam, G., “Mechanical and Vibrational Property Evaluation of Banana Fiber Epoxy Sandwich Composite with Steel Wire Mesh Core”, Journal of Natural Fibers, 2020. [Impact Factor: 5.323]
  2. Sakthivel and A. Ravi Sankar, “Computation-efficient image watermarking architecture with improved performance”, Computers & Electrical Engineering, Vol. 84, 106649, 2020. [Impact factor: 3.818]
  3. Venkatachalam, G., Vimalanand, S., Tiwari, S.K., Mehta, N., and Shukla, S., “Dynamic Characteristics of Honeycomb Sandwich Beam Made with Jute/Epoxy Composite Skin”, Emerging Materials Research, Vol. 9 (1), pp 132-140, 2020. [Impact factor: 1.096]
  4. Sivakumar, M., Venkatachalam, G., Hemanth, V., Vignesh, P., Prashanth, P. and Vimalanand, S., “Studies on Shear Strength of CNT/Coir Fibre/Fly Ash Reinforced Epoxy Polymer Composites”, Emerging Materials Research, Vol. 9 (1), pp 78-88, 2020. [Impact factor: 1.096]
  5. Guru, A., Venkatachalam, G. and Vasudevan, R., “Investigation on thermal buckling Analysis of Jute/Epoxy Polymer Matrix Composite”, Emerging Materials Research, Vol. 9 (4), pp 1229-1236, 2020. [Impact Factor: 1.096]
  6. Rajasekarababu, G Vinayagamurthy., “CFD validation of wind pressure distribution on tall building structure under upstream terrain winds” Progress in Computational Fluid Dynamics, 2020. [Impact Factor: 1.048]
  7. Grace Jency, M. Sekar and Ravi Sankar, “Damping analysis of a quad beam MEMS piezoresistive accelerometer”, International Journal of Modelling and Simulation, 2020.
  8. Venkatachalam, G., Sharma, S.K., Jangid, A.K., Vignesh, P., Nilesh, S.N. and Pandivelan, C., “Investigations on Tensile and Flexural Characteristics of Fly Ash and Banana Fiber-Reinforced Epoxy Matrix Composites”, Engineering Transactions, Vol. 68 (1), pp 89-101, 2020.
  9. Venkatachalam, G., Bhardwaj, P., Satonkar, N. and Pragasam, V. “Determination of Fatigue Limit of Coir/CNT/Fly Ash Reinforced Epoxy Polymer Matrix Composite”, Periodica Polytechnica Mechanical Engineering, 64(3), pp. 248–255, 2020.
  10. Kalaimathi, M., Venkatachalam, G. and Sivakumar, M., “An experimental investigation and modelling for travelling wire electrochemical machining of Monel 400 alloys”, International Journal of Manufacturing Technology and Management, Vo. 34 (3), pp 259-281, 2020.
  11. Kalaimathi, M., Venkatachalam, G., Sivakumar, M. and Ayyappan, S., “Multi-response optimisation of electrochemical machining process parameters by harmony search-desirability function optimiser”, International Journal of Manufacturing Technology and Management, Vol. 34 (4), pp 331-348, 2020.
  12. Venkatachalam, G., Sivakiran, G., Vishnu, P.C., Yash, G., Vignesh, P. and Annamalai, K., “Investigations on surface roughness of natural (banana / coir / sisal) fiber reinforced hybrid polymer matrix composites”, UPB Sci. Bull., Series D, Vol. 82 (2), pp 191-198, 2020.
  13. Sahu, O.P. and Biswal, B.B., “Sensor Integrated Robotic Hand for Industrial Application”, International Journal of Mechanical Engineering and Robotics Research, 9(1), pp.30-34, 2020.
  14. Venkatachalam, G., Vignesh, P., Hitesh, B.N., Gokulakrishnan, B. and Pandivelan, C., 2020, Investigation on Machining Characteristics of Banana Fiber and Silicon Carbide Reinforced Polymer Matrix Composites, Engineering Transactions, Vol. 68 (3), pp 297-313. 2020.

2019:

  1. Rajasekarababu and G. Vinayagamurthy, “Experimental and Computational investigation of outdoor wind flow around a setback building”, Building simulation, pp. 1-14, 2019. [Impact factor: 3.751]
  2. Vimalanand, S. and Venkatachalam, G., Ananda babu, A. and Balamurugan, R., “Dynamic characterization of the thickness tapered laminated plant fiber-reinforced polymer matrix composite plates”, Advanced composite materials, Vol. 28 (2), pp 163-191, 2019. [Impact factor: 2.870]
  3. Vetrivel, B. Anupama Menon, Ribu Mathew and Ravi Sankar, “Influence of the flexure position and a thick gold film on the performance characteristics of doubly fixed quad beam proof mass structures”, IETE Journal of Research, 2019. [Impact factor: 2.333]
  4. Venkatachalam, G., Vimalanand, S. and Vignesh, P., “Experimental and numerical investigation on the dynamic characteristics of thick laminated plant fiber-reinforced polymer composite plates”, Archive of Applied Mechanics, Vol. 89 (2), pp 363-384, 2019. [Impact factor: 1.976]
  5. Ribu Mathew and Ravi Sankar, “Influence of surface layer properties on the thermo-electro-mechanical characteristics of a MEMS/NEMS piezoresistive cantilever surface stress sensor”, Materials Research Express, 2019. [Impact factor: 1.62]
  6. Venkatachalam, G., Reddy, D.M., Tiwari, S., Satonkar, N. and Kovalan, S., “Fracture and flexural analysis of sandwich panel with polypropylene honeycomb as core and jute fabric reinforced epoxy matrix composite as skin layer”, Materials Research Express, Vol. 6 (11), 2019. [Impact factor: 1.62]
  7. Vignesh, P., Reddy, D.M. and Venkatachalam, G., “Cellulose microfibrils from banana fibers: Characterization at different chemical processes”, Materials Research Express, Vol. 6 (12), 2019. [Impact factor: 1.62]
  8. Rajasekarababu and G. Vinayagamurthy, “Experimental and Computational Simulation of an Open Terrain Wind Flow around a Setback Building using Hybrid Turbulence Models”, Journal of Applied Fluid Mechanics, Vol.12, No. 1, pp. 145-154,2019. [Impact factor: 1.405]
  9. Venkatachalam, G., Akshay, I., Giriraj, M., Vignesh, P., Aamer, A.K. and Rishi Dam, “The Effect of Fiber Size on Tensile Characteristics of Natural Fiber Reinforced Composites”, Emerging Materials Research, Vol. 8 (3), pp 426-433, 2019. [Impact factor: 1.096]
  10. Senthilnathan, N., Rajaannamalai, A. and Venkatachalam, G., “Effect of Cobalt Addition on the Morphology and Mechanical Properties of W-Ni-Cu-Co Alloy”, Emerging Materials Research, Vol. 8 (4), pp 558-566, 2019. [Impact factor: 1.096]
  11. Vimalanand, S., Venkatachalam, G., Nikam, T.D., Jog, O.V., and Suryavanshi, R.T., “Determination of Vibrational Characteristics of Coir, Banana and Aloe Vera Fibres Reinforced Hybrid Polymer Matrix Composites”, International Journal of Acoustics and Vibration, Vol. 24(1), pp 12-19, 2019. [Impact factor: 0.581]
  12. Shankarganesh, P.S.P., Muralikannan, R.b and Venkatachalam, G., “Vibration and damping characteristics of hybrid (glass- jute/ sisal/ hemp) fiber reinforced polymer matrix composites to protect environment by natural fiber”, Journal of the Balkan Tribological Association, Vol. 25(1), pp 142 – 151, 2019
  13. Nilesh, S. and Venkatachalam, G., “A Review on Electromagnetic Sheet Metal Forming of Continuum Sheet Metals”, SAE International Journal of Materials and Manufacturing, Vol. 12(2), pp 121 – 133, 2019

 

2018:

  1. Ribu Mathew and Ravi Sankar, “A review on surface stress based miniaturized piezoresistive SU-8 polymeric cantilever sensors”, Nano-Micro Letters, Vol. 10, 1-41, 2018. [Impact factor: 16.419]
  2. Senthilnathan, N., Rajaannamalai, A. and Venkatachalam, G., “Microstructure and mechanical properties of spark plasma sintered tungsten heavy alloys”, Materials Science and Engineering A, Vol. 710, pp 66-73, 2018. [Impact factor: 5.234]
  3. Saranya and Ravi Sankar, “Fabrication of precise microchannels using a side-insulated tool in a spark assisted chemical engraving process”, Materials and Manufacturing Processes, Vol. 33, pp- 1422-1428, 2018. [Impact factor: 4.616]
  4. Sakthivel and A. Ravi Sankar, “An ASIC based invisible watermarking of grayscale images using pixel value search algorithm (PVSA)”, Multimedia Tools and Applications, Vol. 77, pp- 26793–26819, 2018. [Impact factor: 2.757]
  5. Ribu Mathew and Ravi Sankar, “Optimization of a nano-cantilever Biosensor for reduced self-heating effects and improved performance metrics”, Journal of Micromechanics and Microengineering, Vol. 28, 085012, 2018. [Impact factor: 1.881]
  6. Saranya and Ravi Sankar, “Fabrication of precise micro-holes on quartz substrates with improved aspect ratio using the constant velocity feed drilling technique of an ECDM process”, Journal of Micromechanics and Microengineering, Vol. 28, 125009, 2018. [Impact factor: 1.881]
  7. Ribu Mathew and Ravi Sankar, “Impact of isolation and immobilization layers on the electro-mechanical response of piezoresistive nano cantilever sensors”, Journal of Nanoscience and Nanotechnology, 18, pp- 1636-1647, 2018. [Impact factor: 1.354]
  8. Ribu Mathew and Ravi Sankar, “Piezoresistive composite silicon dioxide nanocantilever surface stress sensor: design and optimization”, Journal of Nanoscience and Nanotechnology, 18, pp- 3387-3397, 2018. [Impact factor: 1.354]
  9. Deshmukh, A.R., Venkatachalam, G. and Saraf, M.R., “Fatigue life prediction of joggle weld joint using virtual strain gauge and its validation through experiments”, Mechanics & Industry, Vol. 19 (6), 2018. [Impact factor: 0.913]
  10. Senthilnathan, N., Rajaannamalai, A. and Venkatachalam, G., “Synthesis of tungsten through spark plasma and conventional sintering processes”, Materials today proceedings, Vol. 5 (2), pp 7954-7959, 2018. [Cite Score: 1.8]
  11. Sivakiran, G., Yash, G., Venkatachalam, G., Pandivelan, C. and Ayyappan, S., “Investigations on machining of banana fibre reinforced hybrid polymer matrix composite materials”, Materials today proceedings, Vol. 5 (2), pp 7908-7914, 2018. [Cite Score: 1.8]
  12. Hitesh, K., Rohit, K., Ajinkya, M., Shekar, T., Onkar, M. and Venkatachalam, G., “Study on tensile behavior of fly ash reinforced hybrid polymer matrix composite”, Materials today proceedings, Vol. 5 (2), pp 11922-11932, 2018. [Cite Score: 1.8]
  13. Vignesh, Venkatachalam, G., Gautham, A.S., Anshuman, S., Rishi, P. and Ankita, P., “Studies on tensile strength of sugarcane fiber reinforced hybrid polymer matrix composite”, Materials today proceedings, Vol. 5 (2), pp 13347-13357, 2018. [Cite Score: 1.8]
  14. Marathe, A.V., Venkatachalam, G. and Marathe, N.V., “Cylinder Head Bolt Tightening Strategies in Case of Multi-Cylinder Engines and Its Effect on Gasket Sealing Performance, Bore Deformation and Piston Ring Conformability”, Australian Journal of mechanical engineering, 2018. [Cite Score: 1.7]
  15. Marathe, A.V., Venkatachalam, G. and Marathe, N.V., “Cylinder Head Bolts Tightening Strategies Parameters Finalization by Taguchi Method for Multi Cylinder Engines”, International review of mechanical engineering, Vol. 12 (4), pp 310-319, 2018. [Cite Score: 1.7]
  16. Venkatachalam, G., Mehta, N.H., Shukla, S., Gupta, Y., Sharma, A., Ghosh, R. and Rajan, G., “Experimental Investigations on Flexural and Fracture Behaviors of Flax Fiber Reinforced Sandwich Panels”, International review of mechanical engineering, Vol. 12 (3), pp 231-238, 2018. [Cite Score: 1.7]
  17. Graceraj, P.P., Venkatachalam, G., Garg, A.S. and Afsan, M.A., “Determination of stress intensity factors of jute fiber-reinforced hybrid polymer matrix composites”, Composites: Mechanics, computations, applications, Vol. 9 (1), pp 41-50, 2018. [Cite Score: 1.6]
  18. Jain, K., Kumar, S., Venkatachalam, G., Vimalanand, S. and Ayyappan, S., “Vibrational analysis of hybrid fabric reinforced polymer matrix curved composite beams”, Composites: Mechanics, computations, applications, Vol. 9 (3), pp 269-282, 2018. [Cite Score: 1.6]
  19. Venkatachalam, G., Vignesh, P., Banarjee, D., Karmakar, S. and Reddy, D.M., “Analysis of Tensile and Flexural Strengths of Kenaf Fabric reinforced Hybrid Polymer Matrix Composite”, Composites: Mechanics, computations, applications, Vol. 9 (4), pp 363-379, 2018. [Cite Score: 1.6]
  20. Venkatachalam, G., Vignesh, P., Banarjee, D., Karmakar, S. and Reddy, D.M., “Analysis of Tensile and Flexural Strengths of Kenaf Fabric reinforced Hybrid Polymer Matrix Composite”, Composites: Mechanics, computations, applications, Vol. 9 (4), pp 363-379, 2018. [Cite Score: 1.6]
  21. Venkatachalam, G., Vignesh, P., Omkar, V.J., Tushar, D. N., and Gautham, S., “Determination of stress intensity factor (SIF) of coir and aloe vera fiber reinforced hybrid polymer matrix composites”, UPB Sci. Bull., Series D, Vol. 80(1), pp 219 – 228, 2018.
  22. Kazi, A., Dam, R., Datta, S., Venkatachalam, G. and Rajan, G., “Flexural and fracture analysis of polymer metal hybrid composite panels reinforced with natural fibers”, UPB Sci. Bull., Series B, Vol. 80(3), pp 85 – 96, 2018.
  23. Rajasekarababu and G. Vinayagamurthy, “Computational Simulation of Wind Flow Behavior Around a Building Structure”, Lecture Notes in Mechanical Engineering-Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering, Vol 1, 325-331, 2018.

 

 

2017:

  1. Senthilnathan, N., Rajaannamalai, A. and Venkatachalam, G., “Activated sintering of Tungsten alloys through conventional and spark plasma sintering process”, Materials and Manufacturing Processes, Vol. 32 (16), pp 1861-1868, 2017. [Impact factor: 4.616]
  2. Meena, Ribu Mathew, Jyothi Leelavathi and A. Ravi Sankar, “Performance comparison of a single element piezoresistor with a half-active Wheatstone bridge for miniaturized pressure sensors”, Measurement, Vol-111, pp-340-350, 2017. [Impact factor: 3.927]
  3. Vimalanand, S. and Venkatachalam, G., “Elastic constants of tapered laminated woven jute/epoxy and woven aloe/epoxy composites under the influence of porosity”, Journal of reinforced plastics and composites, Vol.36 (19), pp1453-1469, 2017. [Impact factor: 3.710]
  4. Saranya, Aswathi Nair and Ravi Sankar, “Experimental investigations on the electrical and 2D-machining characteristics of an electrochemical discharge machining (ECDM) process”, Microsystem Technologies, Vol-23, Issue-5, pp-1453-1461, 2017. [Impact factor: 2.276]
  5. Vetrivel, Ribu Mathew and Ravi Sankar, “Design and optimization of a doubly clamped piezoresistive acceleration sensor with an integrated silicon nanowire piezoresistor”, Microsystem Technologies, Vol-23, Issue-8, pp-3525-3536, 2017. [Impact factor: 2.276]
  6. Kalaimathi, M., Venkatachalam, G., Sivakumar, M. and Ayyappan, S., “Experimental investigation on the suitability of ozonated electrolyte in travelling wire electrochemical machining”, Journal of the Brazilian society of mechanical sciences and engineering, Vo. 39 (11), pp 4589-4599, 2017. [Impact factor: 2.22]
  7. Ribu Mathew and Ravi Sankar, “In Silico modeling and investigation of self-heating effects in composite nano cantilever biosensors with integrated piezoresistors”, AIP Advances, 7, 035108, 2017. [Impact factor: 1.548]
  8. Harichandran, R., Selvakumar, N. and Venkatachalam, G., “High temperature wear behavior of Nano/Micro B4C reinforced aluminium matrix composites fabricated by an ultrasonic cavitation – assisted solidification process”, Transactions of Indian institute of metals, Vol. 70 (1), pp 17-29, 2017. [Impact factor: 1.499]
  9. Senthilnathan, N., Rajaannamalai, A. and Venkatachalam, G., “Sintering of Tungsten and Tungsten heavy alloys of W-Ni-Fe and W-Ni-Cu: A review”, Transactions of Indian institute of metals, Vol. 70 (5), pp 1161-1176, 2017. [Impact factor: 1.499]
  10. Meena, Ribu Mathew and A. Ravi Sankar, “Design and optimization of a three terminal piezoresistive pressure sensor for catheter based in-vivo biomedical applications”, Biomedical Physics and Engineering Express, Vol. 3, 045003, 2017. [Cite Score: 1.9]
  11. Harikrushna, D., Venkatachalam, G. and Ayyappan, S., “Optimization of parameters influencing the dynamic behavior of a banana fibre reinforced hybrid polymer matrix compsoites”, Composites: Mechanics, computations, applications, Vol. 8 (1), pp 35-46, 2017. [Cite Score: 1.6 ]
  12. Premkumar, S Nadaraja Pillai, S Arunvinthan, S.Sivaraja, G.Vinayagamurthy, “Study on influence of operating wind turbine on upstream and downstream flow using k-epsilon turbulence model”, Journal of Advanced Research in Dynamical and Control Systems, Vol. 14, pp. 844-856, 2017.
  13. Rajakumar, S., Ravindran, D., Sivakumar, M., Venkatachalam, G. and Muthukumar, S., “Optimization of power coefficient of wind turbine using genetic algorithm”, Journal of The institution of engineers (India): Series C, 98 (2), pp 111-118, 2017.
  14. Patle, B.K., Parhi, D., Jagadeesh, A. and Sahu, O.P., “Real Time Navigation Approach for Mobile Robot”, JCP, 12(2), pp.135-142, 2017
  15. Venkatachalam, G., Vipin, V., Vignesh, P., Ghule, K., and Saluja, J.S., “Investigation on dynamic behaviour of sandwich panels made of aluminium and hybrid polymer and optimization of design parameters using Taguchi method”, UPB Sci. Bull., Series D, Vol. 79(4), pp 205 – 214, 2017.

 

2016:

  1. Ribu Mathew and Ravi Sankar, “Numerical study on the influence of buried oxide layer of SOI wafers on the terminal characteristics of a micro/nano cantilever biosensor with an integrated piezoresistor”, Biomedical Physics & Engineering Express, Vol-2, 055012, 2016. [Cite Score: 1.9]
  2. Graceraj, P.P., Venkatachalam, G., Garg, A.S., Vimal, A. and Afsan, A., “Flexural Behaviour of Jute-Reinforced Hybrid polymer matrix composite,” Composites: Mechanics, computations, applications, Vol. 7(1), pp 17 – 30., 2016. [Cite Score: 1.6]
  3. Marathe, A.V., Marathe, N.V. and Venkatachalam, G., “Angular torque methodology for cylinder head bolted joint and validation by FE and experimental work”, International Journal of Manufacturing, Materials, and Mechanical Engineering, Vol. 6 (4), pp 11-29, 2016.
  4. Venkatachalam, G., Renjith, S.C., Nilay, P.S., Vasan, M. and Annamalai, R., “Investigations on tensile strength of banana fibre reinforced hybrid polymer matrix composites”, Engineering Review, Vol. 36 (1), pp 13-18, 2016.
  5. Ravi, T.S., Venkatachalam, G. and Vimalanand, S.V., “Determination of stress intensity factor of banana fibre reinforced hybrid polymer matrix composite using finite element method”, Periodica Polytechnica Mechanical Engineering, Vol. 60(3), pp 180 – 184, 2016.
  6. Graceraj, P.P., Venkatachalam, G., Gautham, S., and Krishna Kumar, “Investigation on fatigue strength of the jute fiber reinforced hybrid polymer matrix composites”, UPB Sci. Bull., Series D, Vol. 78(1), pp 185 – 196, 2016.
  7. Graceraj, P.P., Venkatachalam, G., Pandivelan, C., Gautham, S., and Chandanbyral, R., “Analysis of mechanical behavior of hybrid fiber (Jute-Gongura) reinforced hybrid polymer matrix composites”, UPB Sci. Bull., Series D, Vol. 78(3), pp 65 – 80, 2016.
  8. Venkatachalam, G., Nishanth, J., Mukesh, M. and Pavankumar, D.S., “Study of forming behavior of square hole mild steel perforated sheet metal”, Applied Mechanics and Materials, Vol. 852, pp 218-228, 2016.
  9. Venkatachalam, G., Nishanth, J., Mukesh, M. and Pavankumar, D.S., “Investigations on influence of geometric parameters in drawing of perforated sheet metals”, Applied Mechanics and Materials, Vol. 852, pp 229-235, 2016.
  10. Harikrushna, D. and Venkatachalam, G., Dynamic analysis of banana fibre reinforced hybrid polymer matrix composite using ANSYS and optimization of design parameters, Applied Mechanics and Materials, Vol. 852, pp 3-9, 2016.

 

2015:

  1. Ribu Mathew and Ravi Sankar, “Design of a triangular platform piezoresistive affinity microcantilever sensor for biochemical sensing applications”, Journal of Physics D: Applied Physics, Vol-48, 205402, 2015. [Impact factor: 3.207]
  2. Venkatachalam, G., Gupta, A. and Gautham Shankar, A., “Flexural analysis of coir fibre reinforced hybrid polymer matrix composites”, Composites: Mechanics, computations, applications, Vol. 6(2), pp 105 – 112, 2015. [Cite Score: 1.6]
  3. Venkatachalam, G., Varun, M., Vimal, A. and Gautham Shankar, A., “Impact analysis of vehicle chassis made of polymer metal hybrids”, Composites: Mechanics, computations, applications, Vol. 6(4), pp 293 – 305, 2015. [Cite Score: 1.6]
  4. Ramakishorebabu, G., Revanthkumar, J., Anandh, P., Venkatachalam, G., and prabaharan, G.P., “Investigations on wear and frictional characteristics of hybrid polymer”, Applied Mechanics and Materials, Vol. 766-767, pp 34-37, 2015.
  5. Graceraj, P. P. and Venkatachalam, G., “Investigations on tensile strength of jute fibre reinforced hybrid polymer matrix composites”, Engineering Review, Vol. 35 (3), pp 275-281, 2015.
  6. Ayyappan, S., Kalaimathi, M. and Venkatachalam, G., “Cost tolerance prediction models for electrochemical machining of metal matrix composites”, Engineering Review, Vol. 35 (3), pp 299-307, 2015.

Before 2015:

  1. Ravi Sankar and S. Das, “Experimental analysis of galvanic corrosion of a thin metal film in a multilayer stack for MEMS application,” Materials Science in Semiconductor Processing, Vol-16, pp-449-453, 2013. [Impact factor: 3.927]
  2. Ravi Sankar and S. Das, “A very-low cross-axis sensitivity piezoresistive accelerometer with an electroplated gold layer atop a thickness reduced proof mass,” Sensors and Actuators A, Vol-189, pp-125-133, 2013. [Impact factor: 3.407]
  3. Venkatachalam, G., Harichandran, R., Rajakumar, S., Dharmaraja, C. and Pandivelan, C., Dec 2008, “Determination of J-Integral and Stress Intensity Factor Using the Commercial FE Software ABAQUS in Austenitic Stainless Steel (AISI 304) Plates,” Int J Adv Manuf Technol, [Impact factor: 3.226]
  4. Ravi Sankar, J. Grace Jency and S. Das, “Design, fabrication and testing of a high performance silicon piezoresistive Z-axis accelerometer with proof mass-edge-aligned-flexures,” Microsystem Technologies, vol. 18, 15, pp. 9-23, 2012. [Impact factor: 2.276]
  5. Ravi Sankar, V. Swathi Sree Bindhu and S. Das, “Coupled effects of gold electroplating and electrochemical discharge machining processes on the performance improvement of a capacitive accelerometer,” Microsystem Technologies, vol. vol. 17, pp. 1661-1670, 2011. [Impact factor: 2.276]
  6. Ravi Sankar, S. Das and S. K. Lahiri, “Cross-axis sensitivity reduction of a silicon MEMS piezoresistive accelerometer,” Microsystem Technologies, vol. 15, pp. 511-518, 2009. [Impact factor: 2.276]
  7. Venkatachalam, G., Nov 2008, “Micro Mechanics of foam using unit cell approach,” IE (I) journal – A S, Vol. 89, Pp 29-31. [Impact factor: 1.904]
  8. Ravi Sankar, S. K. Lahiri and S. Das, “Performance enhancement of a silicon MEMS piezoresistive single axis accelerometer with electroplated gold on a proof mass,” J. Micromech. Microeng., vol. 19, 025008 (10pp), 2009. [Impact factor: 1.881]
  9. Kal, S. Das, D. K. Mourya, K. Biswas, Ravi Sankar and S. K. Lahiri, “CMOS compatible bulk micromachined silicon piezoresistive accelerometer with low off-axis sensitivity,” Microelectronics Journal, vol. 37, pp. 22-30, 2006. [Impact factor: 1.605]
  10. Ravi Sankar, J. Grace Jency, J. Ashwini and S. Das, “Realisation of a silicon piezoresistive accelerometer with proof mass-edge-aligned-flexures using wet anisotropic etching,” IET Micro & Nano Letters, Vol-7, pp-118-121, 2012. [Impact factor: 0.975]
  11. K. Dey, B. Pramanick, A. Ravi Sankar, P. Ganguly and S. Das, “Microstructuring of SU-8 resist for MEMS and bio-applications,” Int. J. on Smart Sensing and Intelligent Systems, vol. 3, pp. 118-129, 2010. [Cite Score: 4.5]
  12. Ravi Sankar, S. Das and S. Kal, “Development of micromachined silicon accelerometers with improved off-axis sensitivity,” Internat. Journal of COMADEM, vol. 11, pp.18-24, 2008. (Invited Paper)
  13. Venkatachalam, G., Narayanan, S. and Sathiya Narayanan, C., 2012, “A finite element method based formability analysis of triangular pattern of square hole perforated commercial pure aluminium sheets,” International Journal of Mechanical and Materials Engineering, Vol. 7 (3), pp 209-213
  14. Deshmukh, A.R., Venkatachalam, G., Hemant, D.C. and Saraf, M.R., 2014, “Effect of weld penetration on fatigue life,” Procedia Engineering, Vol. 97, pp 783 – 789.
  15. Kalaimathi, M., Venkatachalam, G. and Sivakumar, M., 2014, “Experimental Investigations on the electrochemical machining characteristics of monel 400 alloys and optimization of process parameters,” Jordan Journal of Mechanical and Industrial Engineering, Vol. 8(3), pp 143-151.
  16. Ayyappan, S., Kalaimathi, M. and Venkatachalam, G., 2014, “Multi-Objective Optimization of Process Parameters for Electrochemical Machining of 6061Al/10%Wt     Al2O3/ 5%Wt SiC Composite using Hybrid Fuzzy-Artificial Bee Colony Algorithm,” Jordan Journal of Mechanical and Industrial Engineering, Vol. 8(5), pp 323-331.
  17. Sankar, A.K., Mohanam, K., Venkatachalam, G., Karthikeyan, S. and Narayanan, S., 2014, “Influence of Nickel coating on flexural and dynamic behaviour of Aluminium,” Procedia Engineering, Vol. 97, pp 1368 – 1378.
  18. Senthilnathan, N., Venkatachalam, G. and Nilesh, N.S., 2014, “A two stage finite element analysis of electromagnetic forming of perforated aluminium sheet metals,” Procedia Engineering, Vol. 97, pp 1135 – 1144.
  19. Vishnu, P., Ajil, J., Venkatachalam, G., Narayanan, S. and Rajakumar, S., 2014, “Finite Element analysis of jute and banana fibre reinforced hybrid polymer matrix composite and optimization of design parameters using ANOVA technique,” Procedia Engineering, Vol. 97, pp 1116 – 1125.
  20. Vinayagamurthy, G., Tamura, Y., Qingkuan, L., Zheng, Y., Matsui, M. 2014, “Effect of wind speed, wind direction, rainfall intensity, damping and cable diameter on vibration amplitude of the cable,” Journal of Structural Engineering (India), 41(1), pp. 26–30
  21. Lenin Rakesh, N., Palanisamy, V., Vinayagamurthy, G. 2013, “Stress analysis of spider type flexible couplings by using NX Nastran,” Middle – East Journal of Scientific Research, 2013, 14(12), pp. 1748–1751